865 Jarvis Drive Morgan Hill, CA 95037 Tel: (408) 779-8584 Fax: (408) 779-8674
HIGH PERFORMANCE THROTTLE BODY
INSTALLATION INSTRUCTIONS
Part Number: D760-3600A
Applications: 2004-05 545i 2004-06 X5 4.4i
Valvetronic 2005 645i 2005-06 X5 4.8i
2003-05 745i, iL
Please Note: Check the Dinan throttle body for a “V” stamped on the
casting. If there is no “V” stamped on the throttle body, stop and call
Dinan before you proceed with the installation.
Some mechanical skill is required to install this throttle body. Proper installation
of this throttle body also requires complete understanding of the recommended
BMW throttle body removal procedure for your vehicle. If you are not familiar
with this BMW procedure, we strongly recommend that you arrange for a
qualified BMW repair facility to perform this installation.
If you encounter any difficulties during installation, or if these instructions are not
clear to you, please call Dinan Engineering’s Technical Support Staff @ (408)
779-8584.
INSTALLATION:
1. Remove and install the original throttle body following recommended BMW
procedure for throttle body replacement.
/