Vantec Vortex 2 User manual

Brand: Vantec

Model: Vortex 2

Category: Computer cooling components

Type: User manual

This manual is also suitable for

Hard Drive Cooling System Vortex 2

Vantec Vortex 2

Vantec Vortex 2 is a hard drive cooling system designed to protect your crucial data by preventing overheating. It is compatible with any 3.5" hard drive, including Serial ATA, IDE, and SCSI.

Vortex 2 features a specially designed crossflow blower that eliminates dead spots, encasing your hard drive in a continuous stream of cool air. This allows for more efficient and effective cooling than traditional hard drive coolers.

In addition to cooling your hard drive, Vortex 2 also includes vibration dampeners to reduce drive noise and an easy-to-remove and clean air filter to keep your drive dust-free.

Vantec Vortex 2

Vantec Vortex 2 is a hard drive cooling system designed to protect your crucial data by preventing overheating. It is compatible with any 3.5" hard drive, including Serial ATA, IDE, and SCSI.

In addition to cooling your hard drive, Vortex 2 also includes vibration dampeners to reduce drive noise and an easy-to-remove and clean air filter to keep your drive dust-free.

www.vantecusa.com

Model:

As the temperature of a hard drive nears its heat

threshold, read errors, reduced life cycles, and even loss

of data can occur. With the Vortex 2 HDCS (Hard Drive

Cooling System), you can help ensure the dependability

of your crucial data. The Vortex 2 dampens the

vibration caused by the rapidly spinning motors in the

hard drive, reducing noise and shock. It also provides

an easy to clean mesh air filter to help keep dust off

your drive and out of your case. Most importantly, with

its adjustable crossflow blower, the Vortex 2 can lower

the temperature of your hard drive by up to 40%.

Compatible with any 3.5" hard drive, including Serial

ATA, IDE, and SCSI, the Vantec Vortex 2 increases

system stability and protects your data.

ABOUT VORTEX

Tel: (510) 668-0368

Fax: (510) 668-0367

Address: 43185 Osgood Road Fremont, CA 94539

FEATURES

SPECIFICATIONS

PACKAGE INCLUDES

CROSSFLOW BLOWER

High output blower cools even the hottest hard drives,

prolonging life and ensuring reliability and performance.

Elevated drive mounts allow for cooling on all sides of the drive.

Easy to remove and clean air filter keeps your drive dust-free.

Analog knob provides a wide range of fan speeds.

Vibration dampeners reduce drive noise.

Fits a 3.5" drive into a 5.25" bay.

Dimension: 210 x 148.5 x 42.5 mm

Weight: 750 g

Rated Voltage: 12 V

Rated Current: 0.1 A

Fan Speed: 0 ~ 3700 RPM

Airflow: 16 ~ 30 CFM

Noise Level: 28 ~ 38 dBA

Fan MTBF: 50,000 hrs

Bearing Type: Ball Bearing

VTX-C02-SL

( Silver )

VTX-C02-BK

( Black )

Traditional hard drive coolers utilize

standard fans, which can result in dead

spots - areas of the hard drive that the

fan cannot reach. The Vantec Vortex's

specially designed crossflow blower

eliminates those dead spots, encasing

your hard drive in a continuous stream of

cool air. With the crossflow blower, the

Vantec Vortex cools your hard drive more

efficiently and more effectively than

traditional hard drive coolers.

Air Filter x 1

Hard Drive Bracket x 2

Hard Drive Screw x 4

Vibration Dampener x 4

Bracket Screw x 8

Vantec Vortex 2 User manual

Brand: Vantec

Model: Vortex 2

Category: Computer cooling components

Type: User manual

This manual is also suitable for

Hard Drive Cooling System Vortex 2

Vantec Vortex 2

Vantec Vortex 2 is a hard drive cooling system designed to protect your crucial data by preventing overheating. It is compatible with any 3.5" hard drive, including Serial ATA, IDE, and SCSI.

In addition to cooling your hard drive, Vortex 2 also includes vibration dampeners to reduce drive noise and an easy-to-remove and clean air filter to keep your drive dust-free.

Download PDF

report

Vantec Vortex 2 User manual

This manual is also suitable for

Vantec Vortex 2 User manual

Related papers

Other documents