Metra 95-7895 User manual

Category
Car kits
Type
User manual

"Metra 95-7895: Enhancing Your Car Audio Experience

The Metra 95-7895 is a versatile dash kit designed to seamlessly integrate a double DIN or stacked ISO DIN head unit into your 1998-2002 Honda Accord. With its user-friendly features, this kit simplifies the installation process and offers a range of possibilities to upgrade your car's audio system.

Key Capabilities:

  1. Double DIN Provision:

    • Accommodates a standard double DIN head unit, providing a wide range of aftermarket options for enhanced audio and visual experiences.
  2. Stacked ISO DIN Provision:

    • Allows for the installation of two ISO DIN head units, giving you the flexibility to customize your audio setup with separate units for radio, navigation, or other functions.

"Metra 95-7895: Enhancing Your Car Audio Experience

The Metra 95-7895 is a versatile dash kit designed to seamlessly integrate a double DIN or stacked ISO DIN head unit into your 1998-2002 Honda Accord. With its user-friendly features, this kit simplifies the installation process and offers a range of possibilities to upgrade your car's audio system.

Key Capabilities:

  1. Double DIN Provision:

    • Accommodates a standard double DIN head unit, providing a wide range of aftermarket options for enhanced audio and visual experiences.
  2. Stacked ISO DIN Provision:

    • Allows for the installation of two ISO DIN head units, giving you the flexibility to customize your audio setup with separate units for radio, navigation, or other functions.
INSTALLATION INSTRUCTIONS FOR PART 95-7895
95-7895
KIT FEATURES
DDIN Head Unit Provision
ISO Stacked Head Unit Provision
A) Double DIN Brackets B) Double DIN Trim Plate
KIT COMPONENTS
Small Flat Blade Screwdriver • Panel Removal Tool
Phillips Screwdriver
1-800-221-0932
© COPYRIGHT 2007-2009 METRA ELECTRONICS CORPORATION
www.metraonline.com
TOOLS REQUIRED:
APPLICATIONS
Honda Accord
1998 - 2002
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Harness:
70-1721 - Honda Harness 1998-up
A
B
Dash Disassembly
- Honda Accord 1998 - 2002.........................................1
Kit
Assembly
- DDIN / Stacked ISO DIN Head Unit Provisions . . . . . . . . . . . . . . . . . . . . . . . . 2
TABLE OF CONTENTS
95-7895
*Note:
Ref
er also to the instructions included with the aftermarket radio.
K
NOWLEDGE IS
P
OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP certified
technicians.
95-7895 DASH DISASSEMBLY
HONDA ACCORD 1998 - 2002
1
Disconnect the negative battery ter-
minal to prevent an accidental short
circuit.
1
Unsnap the clock panel, disconnect
the wiring and remove.
(Figure A)
2
Remove (1) Phillips screw exposed in
the clock cavity.
(Figure A)
3
Remove (2) Phillips screws below the
factory head unit.
(Figure A)
4
Unclip the radio trim bezel and dis-
connect the wiring.
5
Remove (4) Phillips screws securing
the factory head unit assembly and
disconnect the wiring.
6
Continue to kit assembly.
A
2
95-7895 KIT ASSEMBLY
B
A
DOUBLE DIN / STACKED ISO DIN HEAD UNIT
PROVISIONS
Slide the Double DIN head unit or
stacked ISO head units into the
bracket/trim plate assembly and
secure the Double DIN head unit or
stacked ISO head units to the
assembly using the screws supplied
with the radio. (Figure B)
2
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
3
Reassemble dash in reverse order of
disassembly.
4
*Note: Refer also to the instructions included with the aftermarket radio.
Attach the Double DIN brackets to the
edge of the Double DIN trim plate.
(Figure A)
1
95-7895 INSTRUCTIONS
NOTES
3
95-7895 INSTRUCTIONS
NOTES
4
95-7895 INSTRUCTIONS
NOTES
5
06
INSTRUCTIONS
1-800-221-0932
REV. 11/09/09 © COPYRIGHT 2003-2009 METRA ELECTRONICS CORPORATION INST95-7895
www.metraonline.com
95-7895 INSTRUCTIONS
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Metra 95-7895 User manual

Category
Car kits
Type
User manual

"Metra 95-7895: Enhancing Your Car Audio Experience

The Metra 95-7895 is a versatile dash kit designed to seamlessly integrate a double DIN or stacked ISO DIN head unit into your 1998-2002 Honda Accord. With its user-friendly features, this kit simplifies the installation process and offers a range of possibilities to upgrade your car's audio system.

Key Capabilities:

  1. Double DIN Provision:

    • Accommodates a standard double DIN head unit, providing a wide range of aftermarket options for enhanced audio and visual experiences.
  2. Stacked ISO DIN Provision:

    • Allows for the installation of two ISO DIN head units, giving you the flexibility to customize your audio setup with separate units for radio, navigation, or other functions.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI