IPT Sink Company IPTGR33205050MOC User guide

Type
User guide
Granite Sink
Care and Maintenance
GENERAL CARE
Wash your sink using warm water, a non-abrasive liquid cleaner or detergent and a soft cloth or
non-abrasive woven nylon pad. Your sink may be cleaned as often as it is used.
HEAVY STAINS
Most stains incurred during normal use can be washed away with water and a mild cleaner such as
Comet, BON AMI, Bar Keepers Friend, Soft Scrub and a green Scotch Brite pad.
Some stains may require a diluted solution of bleach. Do not leave concentrated bleach soaking in your
sink as it could cause discoloration.
To prevent staining and discoloration, always rinse your sink after use with clean warm water.
ADDITIONAL RECOMMENDATIONS
Do not use wire wool or steel soap pads as steel particles can become embedded in your sink and rust.
For hard water, calcium or lime deposits wipe with white vinegar and a non-abrasive woven nylon pad.
Rinse after 20 minutes.
TEMPERATURE RESISTANCE
IPT Sinks withstand very well the Hot Pan Test required in the DIN EN 13310:2015.
In the Hot Pan Test, a standardized aluminum bowl filled with wax with a temperature of 180°C has been
used while being put in the sink for 20 minutes. The area which has undergone this impact is afterward
inspected for damages, cracks, etc.
For additional information, visit www.iptsink.com or contact IPT Sink Company directly:
PHONE (678) 445-4638
Contact IPT Sink Company at (678) 445-4638 or visit www.iptsink.com. Copyright © IPT Sink Company Inc. All rights reserved. 03262019
  • Page 1 1

IPT Sink Company IPTGR33205050MOC User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI