Aeg-Electrolux FM4360G-AN User manual

Brand: Aeg-Electrolux

Model: FM4360G-AN

Type: User manual

Aeg-Electrolux FM4360G-AN is a built-in gas hob with a Frontline strip that offers precise control over the cooking process and various safety features for peace of mind. The hob's wok burner provides high power and rapid heat distribution, making it ideal for stir-frying and Asian cuisine. Additionally, the ring burners feature automatic ignition and flame failure protection for added safety and convenience.

FM4360G-AN

User manual Gas wok

Dear Customer

Thank you for choosing one of our high-quality products.

With this appliance you will experience the perfect combination of functional

design and cutting edge technology.

Convince yourself that our appliances are engineered to deliver the best per-

formance and control - indeed we are setting the highest standards of excel-

lence.

In addition to this you find environmental and energy saving aspects as an inte-

gral part of our products.

To ensure optimal and regular performance of your appliance please read this

instruction manual carefully. It will enable you to navigate all processes perfect-

ly and most efficiently.

To refer to this manual any time you need to, we recommend you to keep it in a

safe place. And please pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

ng sym

s are use

n t

s user

ormat

on:

Warning! This must be read! Important advice for the safety of persons and

information on avoiding damage to the appliance

3 General information and advice

2 Information on environmental protection

z Dangerous voltage

3Contents

Contents

Operating Instructions 4

Safety instructions 4

Before using for the first time 6

Description of the Appliance 7

Cooking surface layout 7

Burner powers related to H

s 7

Ring switch settings 7

Ring burner 8

Operating the appliance 9

Switching the appliance on and off 10

Cleaning and Care 11

What to do if … 13

Disposal 14

Installation Instructions 15

Safety instructions 15

Assembly 18

Installing more than one Frontline hob 21

Guarantee/Customer Service 25

Service 27

Operating Instructions4

Operating Instructions

1 Safety instructions

Please comply with these instructions. If you do not, any damage resulting is not

covered by the warranty.

Correct use

• This appliance is not intended for use by children or other persons whose

physical, sensory or mental capabilities or lack of experience and knowledge

prevents them from using the appliance safely without supervision or instruc-

tion by a responsible person to ensure that they can use the appliance safely.

• Do not leave the appliance unattended during operation.

• This appliance should be used only for normal domestic cooking and frying of

food.

• The appliance must not be used as a work surface or as a storage surface.

• Additions or modifications to the appliance are not permitted.

Gas/electrical safety

• This appliance must only be connected by a qualified installation engineer.

Before installation and using for the first time, the operating and installation

instructions are to be followed.

• The appliance must only be installed in accordance with the regulations in

force and only in a well ventilated, sufficiently large room. If in doubt, speak to

your installer.

• In the event of faults with the appliance or damage to the burner or the glass

ceramic (cracks, scratches, splits), switch off the appliance, shut off gas supply.

Do not use the appliance if damaged!

• If away from home for a long time: shut off mains gas supply.

• Repairs to the appliance must only be carried out by qualified service engi-

neers. Considerable danger may result from improper repairs. If repairs become

necessary, please contact our Customer Care Department or your dealer.

• Using a gas cooking appliance leads to a build up of heat and humidity in the

room in which it is installed. Make sure there is good ventilation in the kitch-

en: Open the windows or vents or install an extractor hood.

• If the appliance is used intensively or for a long time, provide additional venti-

lation: Open window or operate cooker hood on a high setting.

5Safety instructions

Children’s safety

• Small children must be kept away from the appliance.

• Only let bigger children work on the appliance under supervision.

Safety during use

1 Warning in the event of a smell of gas:

• Do not activate any electrical switches.

• Do not light matches or lighters, do not smoke.

• Open windows and doors, ventilate very well.

• Shut off gas supply to the appliance and mains gas supply.

• Contact your gas company’s emergency service or the servicedepartment.

• Do not do anything to the appliance.

1 In addition follow the safety instructions of your local gas supplier.

• Be careful if connecting electrical appliances to sockets near to this appliance.

Electrical leads must not be allowed to come near hot rings.

1 Warning: Risk of burns!

• During operation the rings become hot.

• Overheated fats and oils can ignite very quickly. Warning! Fire hazard!

• Do not place or store flammable liquids, highly inflammable materials or fusi-

ble objects (e.g. plastic film, plastic, aluminium) on or near the appliance.

Safety when cleaning

• For cleaning, the appliance must be switched off and cooled down.

• For safety reasons, the cleaning of the appliance with steam jet or high-pres-

sure cleaning equipment is not permitted.

How to avoid damage to the appliance

• The glass ceramic can be damaged by objects falling onto it.

• Objects that melt and things that boil over can burn onto the glass ceramic

and should be removed straightaway.

Before using for the first time6

Before using for the first time

• Remove pan stand, burner cover and burner crown.

• Remove any stickers that are on the glass ceramic.

• Put a few drops of glass ceramic cleaner on the glass ceramic and rub with a

cloth or kitchen paper.

• Wipe glass ceramic dry.

• Clean pan holder, burner crown and burner cover with warm water and wash-

ing up liquid. Dry off.

• Replace burner crown, burner cover and pan stand.

7Description of the Appliance

Description of the Appliance

Built-in Gas Hob Class 3

Cooking surface layout

Burner powers related to H

Ring switch settings

Burner / Type of gas Natural gas Town gas Liquid gas

Wok burner 3,7 kW 3,4 kW 3,7 kW/269g/h

Symbol Description

• Off position

max. power, ignition position

minimum power

Frontline strip

Ring switch

Wok burner

Description of the Appliance8

Ring burner

3 The appliance is equipped with a fully protected ring burner. If the flames go

out, for whatever reason, the gas supply is automatically closed off.

Burner crown

Pan bracket

Burner cover

Burner body

Spark plug

Thermosensor

Large flame jet

9Operating the appliance

Operating the appliance

ATTENTION!

Each time, before switching on the appli-

ance make sure that the burner crown and

burner cover are lying straight on the burn-

er body.

If the burner crown and the burner cover

are not on straight, the gas flame will not

burn evenly and this can cause damage to

the burner.

1 Important

The apertures for the gas flames on the burner crown must not be blocked by

foods that have boiled over or by cleaning products.

Operating the appliance10

Switching the appliance on and off

1. Turn the ring switch to the left to maxi-

mum power .

2. Press the ring switch in firmly, until the gas

has ignited. After a successful ignition hold

the ring switch depressed for about 5 sec-

onds. If the flames should go out, repeat

the ignition process.

3. Set the desired power. The power can be set

progressively from maximum power to

minimum power .

4. To end the cooking process, turn back to

the Off position.

3 In the event of a power cut or also when the spark plug is wet (because of food

boiling over or cleaning) the rings can also be ignited using a gas lighter or a

match.

1 Warning!

Only take cookware from the ring when at minimum power or in the Off Posi-

tion •.

11Cleaning and Care

Cleaning and Care

Warning: During cleaning the burners must be switched off. Ensure that the

hob has cooled down sufficiently so that you can touch all parts safely.

1 Important: Sharp objects and abrasive cleaning materials will damage the ap-

pliance. Clean with water and washing up liquid.

1 Important: Residues from cleaning agents will damage the appliance. Remove

residues with water and washing up liquid.

Glass ceramic

1. Place the scraper on the glass ceramic surface at an angle.

2. Remove residues by sliding the blade over the surface.

3. Wipe the appliance with a damp cloth and a little washing up liquid.

4. Rub the appliance dry using a clean cloth.

*Scrapers and cleaners for glass ceramic and stainless steel can be purchased from specialist retailers

Burner crown and burner cover

Clean burner crown and burner cover in hot washing up water, remove heavy

deposits with a soft brush after soaking. The flame apertures of the burner

crown must always be clean and free of debris.

Pan brackets

Wash the pan brackets using hot water and washing-up liquid. Soak heavy resi-

dues with a wet cloth.

Please don’t wash burner crown, burner cover and pan bracket in the dishwasher.

remove

Type of dirt immediately

when the appliance has

cooled down

using

sugar, food containing sugar yes ---

a scraper*

plastics, tin foil yes ---

limescale and water rings --- yes

cleaner for glass ce-

ramic or stainless

steel*

fat splashes --- yes

shiny metallic discolorations --- yes

Cleaning and Care12

Removable Frontline strip

The aluminium Frontline strip fastens on by means of magnets. It is easy to re-

move by hand and can be cleaned with detergent. Please do not use any scour-

ing agents or sponges that scratch. Do not clean the strip in the dishwasher.

13What to do if …

What to do if …

If you are unable to remedy the problem by following the above sugges-

tions, please contact your dealer or the Customer Care Department.

1 Warning! Repairs to the appliance are only to be carried out by qualified service

engineers. Considerable danger to the user may result from improper repairs.

3 If the appliance has been wrongly operated, the visit from the customer service

technician or dealer may not take place free of charge, even during the warranty

period.

Problem Possible cause Remedy

Ring burners are not igniting. The switch was not depressed

firmly enough.

Depress switch firmly as far as

it will go.

The spark plug is damp or

dirty.

Dry or clean spark plug, if

necessary light with gas

lighter or match.

Fault in the electrical supply.

The fuse in the house’s electri-

cal wiring (fuse box) has been

tripped.

Check the fuses. If the fuse

should trip several times, a

dvise Customer Care Depart-

ment.

The ignition is defective.

Advise Customer Care Depart-

ment.

The ring burners go out on

large flame setting, even after

several attempts to light.

Dirt on the thermosensor Clean thermosensor. If this

does not lead to success,

advise Customer Care Depart-

ment

Defect on the thermosensor Advise Customer Care Depart-

ment.

Disposal14

Disposal

Packaging material

The packaging materials are environmentally friendly and can be recycled. The

plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dis-

pose of the packaging materials in the appropriate container at the community

waste disposal facilities.

2 Old appliance

The symbol W on the product or on its packaging indicates that this product

may not be treated as household waste. Instead it shall be handed over to the

applicable collection point for the recycling of electrical and electronic equip-

ment. By ensuring this product is disposed of correctly, you will help prevent po-

tential negative consequences for the environment and human health, which

could otherwise be caused by inappropriate waste handling of this product. For

more detailed information about recycling of this product, please contact your

local city office, your household waste disposal service or the shop where you

purchased the product.

15Installation Instructions

Installation Instructions

Safety instructions

Warning! This must be read!

Safety instructions when building in

The laws, ordinances, directives and standards in force in the country of use are

to be followed (safety regulations, proper recycling in accordance with the regu-

lations, etc.)

Installation may only be carried out by a qualified electrician.

The minimum distances to other appliances and units are to be observed.

Anti-shock protection must be provided by the installation, for example drawers

may only be installed with a protective floor directly underneath the appliance.

The cut surfaces of the worktop are to be protected against moisture using a

suitable sealant.

The sealant seals the appliance to the work top with no gap.

Ensure anti-shock protection through correct installation by a qualified installer.

Safety instructions when connecting to the electricity supply

If this appliance’s mains cable is damaged, it must be replaced by a special cable

(type H05BB-F Tmax 90°C; or higher). The latter is available from the Customer

Care Department.

Observe electrical safety rules.

A device must be provided in the electrical installation which allows the appli-

ance to be disconnected from the mains at all poles with a contact opening

width of at least 3 mm.

Suitable isolation devices include line protecting cut-outs, fuses (screw type fus-

es are to be removed from the holder), earth leakage trips and contactors.

Installation Instructions16

Safety instructions when connecting to the gas supply

1 Warning!

When installing, the appliance must not be connected to the electrical supply.

Disconnect the mains plug or switch off or take out the fuses. Shut off mains

gas supply.

• A stop tap must be built-in between the house’s gas supply and the appliance.

• Before connecting the appliance, check whether the local connection condi-

tions (type of gas and gas pressure) match the appliance’s set-up.

• The settings for this appliance are given on the appliance’s rating plate.

• The present settings for the type of gas and gas pressure are given on a sticker

near the connection pipe.

• This appliance is not connected to an exhaust gas outlet. It must be connected

in accordance with the installation conditions that apply. Special attention is

to be paid to suitable ventilation.

Gas connection

• The 1/2’’ gas connection pipe is located on the left-hand side of the back of

the appliance.

• Burner rail end piece with nut (1), gasket

(2) and adjustable fitting (3) are to be as-

sembled as illustrated.

• It is recommended that a gas safety

socket is used.

• The connection can be permanent or us-

ing a permitted gas safety hose assembly

with a socket.

• The hose assembly must be positioned

such that it is not in contact with any-

thing and must not come into contact

with a moveable part of the built-in unit

(e.g. drawer).

• The gas hob can be changed over to other types of gas. Conversion kits for

other gas types are available in specialist shops.

17Installation Instructions

Cutting the seal to length

• A sealing tape is stuck to the underside of the appliance. The two ends overlap

and must be cut off flush.

1 Warning!

After installation always check the tightness of the connections using a soap so-

lution. Never use a flame to check the tightness.

Using the appliance for the first time

• Ignite each ring burner and test burning stability at maximum and minimum

power.

Assembly18

Assembly

19Assembly

Assembly20

Page is loading ...

Aeg-Electrolux FM4360G-AN User manual

Aeg-Electrolux FM4360G-AN User manual

Aeg-Electrolux FM4360G-AN User manual

Related papers

Other documents