WASSERSTEIN Horizontal Wedge User manual

Brand
WASSERSTEIN
Model
Horizontal Wedge
Type
User manual
Horizontal Wedge for
Wyze Video Doorbell Pro
User Manual
In the Box
2 x tiny screws
2 x wall anchors
2 x mount screws
2 x short screws
1 x horizontal
wedge
UP
Page 1
Pre-Installation
• We recommend using a magnetic screwdriver
to easily place the screws in.
• Do not install the tiny screw to lock the
Horizontal Wedge before securing it to
the wall.
1. Turn off the power of your existing video
doorbell at the electrical panel.
Note: Always consult a professional electrician
before working with any electrical wires.
2. Remove your existing doorbell (if any) from
the wall.
X
Page 2
2. Mount the wall plate from the wedge using
mount screws and wall anchors provided (the
drill bit size is 1/8 in).
Page 3
Installation
1. Pull the Horizontal Wedge apart gently.
Page 4
3. Re-attach the wedge onto the wall plate. Make
sure the angle mount firmly clicks onto the wall
plate.
4. Install the wall plate from the Wyze Video
Doorbell Pro onto the wedge using the short
screws provided.
UP
Page 5
5. Turn on the doorbell. Press it against the wall
plate until it clicks into place. If you are using
the wired version of the doorbell, connect the
wires to the doorbell as shown in the image
below, then attach the doorbell onto the wall
plate.
Wired setting:
UP
Wireless setting:
UP
Page 6
6. Check the view from the App. Adjust the
Horizontal Wedge to your preferred angle
and fix it with the tiny screws on both sides.
7. Lock the doorbell onto the wall plate with the
screw at the bottom of the doorbell.
Installation with Wasserstein Wall Plate
The Horizontal Wedge is also compatible with
the Wasserstein wall plate. Align the Wasserstein
wall plate together with the wedge's wall plate
and mount them onto the wall, then follow the
steps above to install the Horizontal Wedge and
the doorbell.
Page 7
Get More Support
Scan the QR code below or email us at:
[email protected]
Wyze Video Doorbell Pro is not included.
Wyze Video Doorbell Pro is a trademark
of Wyze Labs, Inc.
Wasserstein is not affiliated with Wyze Labs, Inc.
Wasserstein is a trademark of Dropcases Ltd.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

WASSERSTEIN Horizontal Wedge User manual

Brand
WASSERSTEIN
Model
Horizontal Wedge
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents