WASSERSTEIN Wyze User manual

Category
Security camera accessories
Type
User manual
Solar Panel for Wyze
Cam Outdoor
USER MANUAL
Page 1
set of installation screws
& wall anchors
360° mounting
bracket
solar panel
In the Box
1. Do not open or dismantle the solar panel for any reason.
2. Keep the solar panel away from any heat source like a furnace, heater,
or barbeque grill.
3. Make sure that the outdoor charging cable is properly attached to your
camera.
4. Avoid bending, stretching, or cutting the charging cable.
Make sure that your Wyze Cam Outdoor is fully charged before you
connect it to the solar panel.
Please place you solar panel at the position with best direct sunshine.
Important Note
Warning
1. Mark the holes using the bracket for guidance.
3. Insert the anchors and screw the mount to the wall.
Installing Solar Panel
Page 2
2. Drill the holes.
Page 3
4. Slide the solar panel onto the mounting piece.
The 360-degrees rotatable mounting bracket allows you to adjust the
Solar Panel in the best position to absorb sunlight.
Adjusting your Solar Panel
Page 4
1. Open the rubber cap at the back of your camera, and plug the cable
firmly into the port.
2. Place the solar panel under direct sunlight to continuously charge to
your camera.
Connect the Solar Panel to your Wyze Cam Outdoor
Specifications
Dimension:
Power:
Voltage:
Outdoor Cable length:
Materials:
7.5 x 4.37 x 0.79 in
2 W
5 V DC
13.5 ft
ABS
Get More Support
Scan the QR code below or email us at [email protected].
Wyze Cam Outdoor is not included.
Wyze Cam Outdoor is a trademark of Wyze Labs, Inc.
Wasserstein is not affiliated with Wyze Labs, Inc.
Wasserstein is a trademark of Dropcases Ltd. Made in China
www.wasserstein-home.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

WASSERSTEIN Wyze User manual

Category
Security camera accessories
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI