ITC TTR1834 User manual

Brand: ITC

Model: TTR1834

Type: User manual

ITC TTR1834 is a table system designed for versatile use, featuring a sturdy construction and easy installation. It can accommodate a maximum load of 50 lbs evenly distributed, making it suitable for various purposes such as dining, studying, or working. The table is easy to clean using household solutions like soap and water, Fantastic, Windex, 409, or Simple Green.

ITC TTR1834 is a table system designed for versatile use, featuring a sturdy construction and easy installation. It can accommodate a maximum load of 50 lbs evenly distributed, making it suitable for various purposes such as dining, studying, or working. The table is easy to clean using household solutions like soap and water, Fantastic, Windex, 409, or Simple Green.

For warranty information please visit www.itc-manufacturersselect.com/warranty

ITC Incorporated • 3030 Corporate Grove Dr. • Hudsonville • MI • 49426

Phone: 616-396-1355 • www.itc-us.com • Doc #: MSTTR1834 • Revision A: 12.04.19

Rectangle Table System Installation Instructions

(Base Part #: TTR1834 )

Mount the oor base into solid oor structure (wood,

berglass, etc.) using #12 phillips oval head screws.

1.

Install the table by aligning the table base to the

leg and push down. To ensure the table base is

secure to the table leg make sure the table base

goes over the rst black piece.

3.

INSTALLATION CONSIDERATIONS

• To avoid a hazard to children, account for all parts and destroy all packing materials.

•Do not sit on or lean on table, intended for use as a table only. Maximum load is 50 lbs distributed evenly.

•The stiffness and rigidity of the floor mounting substrate has a direct effect on the sturdiness of the entire table system.

•Recommened cleaning solutions: soap and water, Fantastic, Windex, 409 or Simple Green.

Align the T-bolt on the bottom of the leg with the

rectangular opening in the floor base. Insert the T-bolt

and and use your foot to press down the black button

the Floor Base. Next begin to turn the leg clockwise. After

one turn, pull up on the leg to ensure that the T-bolt is

secure in the floor base. Continue to turn the leg until the

leg is secure.

2.

Removing The Leg & Table

1 To remove the table, press the button at the top of

the post. *Twist top until it releases from taper t then lift

until it pops off the post. 2 To remove the leg, slide base

release tab, then turn the leg counter-clockwise and lift

gently until the leg removes from the base 3 Place cover

on oor base when the leg is not in place.

PARTS/TOOLS NEEDED:

#12 Oval Head

Screws

Table & Table Base

(Table base comes attached to table) Table Leg & Floor Base Screws

(Not Provided)

Power Drill

(Not Provided)

Ensure the T-bolt is

3/8” away from the

bottom of the leg

1. 3.2.

1

ITC TTR1834 User manual

Brand: ITC

Model: TTR1834

Type: User manual

ITC TTR1834 is a table system designed for versatile use, featuring a sturdy construction and easy installation. It can accommodate a maximum load of 50 lbs evenly distributed, making it suitable for various purposes such as dining, studying, or working. The table is easy to clean using household solutions like soap and water, Fantastic, Windex, 409, or Simple Green.

Download PDF

Related papers

Other documents