2. AcuityBrands
  3. L-Type Track Adapter
L-Type Track Adapter

AcuityBrands L-Type Track Adapter Installation guide

  • I've reviewed the installation instructions for the L-Type Track Adapter and understand the steps for mounting and adjusting the adapter. I'm ready to answer any questions you may have about the procedures or features of this track adapter.
  • What should I do before inserting the adapter box into the track?
    What is the next step after inserting the adapter box into the track?
    Which contact is adjustable?
INSTALLATION INSTRUCTIONS
For L-Type Track Adapter Option
1300 S. Wolf Road • Des Plaines, IL 60018 • 800-323-5068 •www.acuitybrands.com
©2017 Acuity Brands Lighting, Inc. Rev 4/18 P4678
1 of 1
Find the latch and the polarity line. Align
parts as shown below and insert the
adapter box into the track.
Latch on adapter Rotate in the direction
of the "Install" arrow
Continue to rotate until the latch snaps
in place between the two track rails. Final Position
Latch snaps into place between rails
Second Circuit Positioning
1. Hold onto Adapter Box with one hand
2. Place the end of a flat head screw driver under the contact shown below
3. Gently pull up, the contact should move vertically until hitting a hard stop
4. Follow instructions for inserting into track
Ground contact
Final Position
SAVE THESE INSTRUCTIONS
Find contact above the ground contact.
This is the only contact that is adjustable.
Polarity line
Continue to depress latch until
final position
Coming Soon
/