ClimaRad V1C-V User manual

Brand
ClimaRad
Model
V1C-V
Type
User manual

ClimaRad V1C-V is an intelligent ventilation system that automatically controls airflow, heating, and cooling based on CO2 levels and temperature. It features sensors for CO2, humidity, indoor and outdoor temperature, ensuring optimal air quality and comfort in your room. The device is equipped with convectors for ventilation, heating, and cooling functions. You can manually adjust the desired temperature using the control panel. ClimaRad V1C-V also includes a child lock for safety and a pause function for temporary ventilation stoppages.

ClimaRad V1C-V is an intelligent ventilation system that automatically controls airflow, heating, and cooling based on CO2 levels and temperature. It features sensors for CO2, humidity, indoor and outdoor temperature, ensuring optimal air quality and comfort in your room. The device is equipped with convectors for ventilation, heating, and cooling functions. You can manually adjust the desired temperature using the control panel. ClimaRad V1C-V also includes a child lock for safety and a pause function for temporary ventilation stoppages.

User instructions ClimaRad Ventura V1C-V
2022.002
The ClimaRad Ventura V1C-V is fitted with sensors for CO , humidity, indoor and outdoor temperature. These
2
measure the air quality and determine the ventilation needed per room automatically. The device is fitted with
convectors which enable the unit to ventilate, heat and cool (if needed).
Operating principle ClimaRad Ventura V1C-V
ClimaRad Ventura V1C-V
The control panel is situated on the front of the device. You can find the function buttons and notifications of the
panel in question on page 2 of this instruction manual.
The ClimaRad Ventura V1C-V in your room is optimally configured by the installer and functions fully
automatically. That is why we only explain the function buttons that are relevant for you during daily use.
Operating the ClimaRad Ventura V1C-V
You can set the desired temperature yourself by turning the ring.
Turn left for lower temperatures, turn right for higher temperatures.
Operating the ClimaRad Round
Press 4 seconds simultaneously
Press for 6 seconds
Child lock: The child lock is activated.
Error: A fault has occurred. Please contact your installer or
housing corporation.
Dirty filter: Replace the air filters or contact your installer or
housing corporation After replacing the filters, press the + and -
buttons for 6 seconds.
Messages Switch off
ClimaRad B.V. - Lübeckstraat 25 - 7575 EE - Oldenzaal - NL - info@climarad.com - www.climarad.co.uk - tel. +31 541 358130
•
Function Keys
Automatic control: The ventilation, heating and cooling system in the
room are automatically controlled by your ClimaRad Ventura, which
functions based on measurements and temperature.CO2
Pause: Use this function if you want to stop ventilating temporarily.
After a period of 4 hours, your ventilation unit will reset to automatic
control.
Ventilation (manual): This function allows you to activate the
ventilation function of your device. You can then use the + and - on
your control panel to configure the ventilation speed. After a period of
8 hours, your device will reset to automatic control.
Temperature: You can set the desired temperature yourself using the +
and - on your control panel in order to heat up or optionally cool down
the room.
No function.
A U T O
•
A U T O
ClimaRad Ventura V1C-V
•
F
I
L
T
E
R
M
A
N
U
A
L
S
P
E
E
D
T
E
M
P
•
Child lock: This key combination locks your control panel. Press the
indicated buttons simultaneously for 4 seconds. If you want to unlock
the device, repeat this action.
  • Page 1 1
  • Page 2 2

ClimaRad V1C-V User manual

Brand
ClimaRad
Model
V1C-V
Type
User manual

ClimaRad V1C-V is an intelligent ventilation system that automatically controls airflow, heating, and cooling based on CO2 levels and temperature. It features sensors for CO2, humidity, indoor and outdoor temperature, ensuring optimal air quality and comfort in your room. The device is equipped with convectors for ventilation, heating, and cooling functions. You can manually adjust the desired temperature using the control panel. ClimaRad V1C-V also includes a child lock for safety and a pause function for temporary ventilation stoppages.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents