S-Fan

ClimaRad S-Fan User manual

  • I have reviewed the operating instructions for the ClimaRad S-Fan 4-position switch. This document explains how to manually control the S-Fan fan using the switch, how to override the automatic mode, and what the LED indicators mean. I'm ready to answer any questions you may have about operating your S-Fan using this switch.
  • What is the default operation mode of the ClimaRad S-Fan?
    How can I manually control the ClimaRad S-Fan?
    What do the comfort and heating buttons do on the standard S-Fan?
    Which flashing LED color indicates successful link with S-Fan?
    What does a red LED flashing one or two times indicate?
Operating instructions 4-position switch S-Fan
Description and application
Using the wireless RF 4-position switch, your ClimaRad S-Fan can be operated manually.
4-position switch S-Fan
ClimaRad B.V. - Lübeckstraat 25 - 7575 EE - Oldenzaal - NL - info@climarad.com - www.climarad.nl/en - tel. +31 541 358130
By default, the ClimaRad S-Fan operates fully automatically (AUTO
mode).
However, the automatic control can be manually overridden by the
I, II, III, O (low, medium, high and pause) mode.
The comfort button ( ) and heating button ( ) have no function, only
on an S-Fan+ are these buttons enabled.
Setting options and operation of 4-position switch ClimaRad S-Fan
If a button is pressed longer than
indicated, no action is performed and the
switch switches to standby to conserve
battery power.
After using the switch correctly, the LED
results are displayed, as described in the
table opposite.
2023.001
I,II,III,O
Button
number of press
duration action
AUTO
I
II
O
III
1
1
2
3
4
<1s
<1s
<1s
<1s
<1s
automatic
low setting
middle position
high setting
pause
LED colour
flashing
description
green
orange
orange
1x
1x
2x
mode changed/normal operation
low battery/start-up
S-Fan displays message 'filter dirty'
I,II,II,O + 13-6 s connect modus
no function
no function
green 2x link with S-Fan successful
red 1x of 2x Contact corporation/landlord
/