
C2说明书
铜板纸
正面
反面
User manual
C4 Soundbar
Type-C Charging Cable 3.5mm to 3.5mm cable
Product name
Output power
Adapter
Bluetooth version
Speaker frequency
Bluetooth range
Dimensions
5.0
Computer soundbar
7W*2
5V/2A
Up to 10m
430mm x 70mm x 68mm
70Hz-20KHz
12
4
3
Once you connect a device to the soundbar, the connec-
tion will be stored. When you turn on the soundbar, the
Bluetooth connection will be activated automatically. To
connect another device to the soundbar, you need to
disconnect the former connection first: turning off Blue-
tooth on your former device, or clearing the former con-
nection by pressing and holding the Power button for 3
seconds. After that, you can find and connect the other
devices.
1
After connections with mobile devices, Bluetooth device
audio is off. Turn on the mobile's output volume.
1
There should be some obstructions between the soundbar
and your Bluetooth devices which interfere with the con-
nection. Please remove them. The supported range for the
Bluetooth connection is around 10 meters indoor. Please
do not exceed that range.
1
Model:C4
BRING THE SOUND TO YOUR HEART
User Manual
Thank you very much for purchasing the
C4 Computer Soundbar.
Please read the instructions carefully
before using this product.
If you have any problems or suggestions
for the product, please contact us via
The default input setting is Bluetooth mode after
booting the soundbar .
The Bluetooth mode is on when the light flashes
blue.
C4
Model:C4
BRING THE SOUN D TO YOUR HEAR T
User Manual
Type-C Charging Cable
3.5mm to 3.5mm Cable
TYPE-C
AUX
AUX
Configure the sound output device on your device
1
(System>Sound>Output>Choose your output device).
Turn up the volume on your soundbar, device, or appli-
cation.
2
Power/Volume Knob: counterclockwise to turn on
and raise the volume, clockwise to lower the volume and
turn off.
Mic: phone call
M: Switch input mode
Clear the paired devices on the C4 soundbar.
Change Lighting Mode: Press the one
EQ: Press the one to switch music or bass mode