Dune HD Pro Vision 4K Solo is a powerful media player that offers a wide range of features for enjoying your favorite content. With its 4K resolution support, you can experience stunning visuals and lifelike images. The player also supports a variety of audio formats, including Dolby Atmos and DTS-HD Master Audio, so you can enjoy immersive sound quality. With built-in Wi-Fi and Ethernet connectivity, you can easily stream content from your home network or the internet.
Dune HD Pro Vision 4K Solo is a powerful media player that offers a wide range of features for enjoying your favorite content. With its 4K resolution support, you can experience stunning visuals and lifelike images. The player also supports a variety of audio formats, including Dolby Atmos and DTS-HD Master Audio, so you can enjoy immersive sound quality. With built-in Wi-Fi and Ethernet connectivity, you can easily stream content from your home network or the internet.
www.dune-hd.com
support@dune-hd.com
11. Recovery button
10. HDMI 2.0b output (main)
9. HDMI 1.4 output (audio only)
8. Optical S/PDIF output
4. 2 x Wi-Fi antennas
6. Composite video output
7. Coaxial S/PDIF output
2. LED indicator
1. Power button
5. Analog stereo audio output
3. Display
Interface
3
5 6
22. Ventilation holes
18. USB 3.1 host
21. 3.5" SATA HDD slot
19. 12V DC input
20. Power ON/OFF switch
17. USB Type-C host
15. Ethernet 10/100/1000
14. IR input (3.5mm minijack, T-R-S: 5V-IR-GND, L=14.5mm)
13. HDMI 2.0 input
12. Bluetooth antenna
16. 2 x USB 2.0 host
+
-
-
-
4
7 8 9 10 11 13 14 15
16
17 18 1912
1 2
21
20
22
Do not block ventilation holes!
Package content
Installation
Connect the power adaptor
Connect your Dune HD Player
to TV by HDMI-cable
2. Power supply
3. HDMI cable
1. Dune HD player
4. 2 x Wi-Fi Antennas 8. Quick start guide
7. 4 x AAA batteries
6. Remote control
5. Bluetooth antenna
Use Ethernet-cable (not included)
to connect Dune HD player to the
Internet (or use Wi-Fi)
Turn on the Dune HD player and
TV. Choose the proper input on
the TV.
3
7 8
6
1 2 4
5
Remote control
џSELECT — switch text input mode, add the item to the selection list,
control some other player functions.
џ0–9 — enter numbers and text; control some other player functions.
џMOUSE — toggle virtual mouse (if available).
џSEARCH — access the search / time search functions.
џSETUP — enter/leave the setup menu; adjust playback settings
during playback.
џRECENT — switch to recently watched channels/movies or other
recent items.
џLIGHT — turn the remote control backlight on/off.
џPOWER — turn the player on/off.
џTV section (UP, DOWN, AV IN, TV INFO, TV POWER, SET) —
learnable buttons to control TV or other external equipment; use SET
button to learn the other 5 buttons (see "Learning Remote Control"
section for more information).
џTV, MOVIES, MUSIC — hot keys to quickly access TV channels /
Movies / Music functionality (when available).
џ►(PLAY), || (PAUSE), STOP, >>| (NEXT), |<< (PREV), >> (FWD), <<
(REW), REC, ZOOM, SUBTITLE, AUDIO, MODE — control the
playback and some other player functions.
џArrows ◄▲►▼, ENTER, RETURN, TOP MENU, POP UP MENU,
INFO — main buttons for controlling the player (navigate across the
items on the screen, open/use the currently selected item, go back to
the previous screen, go to the main menu, show/hide popup menu
with actions for the currently selected item or the current player state,
show/hide information about the currently selected item or the
current player state, control some other player functions).
џCLEAR — delete the last entered character, delete the currently
selected item, control some other player functions.
џA (Red), B (Green), C (Yellow), D (Blue) — control various player
functions.
џV+/V- (volume up / volume down) — adjust the volume.
џP+/P- (page up / page down) — scroll up and down in various lists,
switch to the next/previous TV channel, control some other player
functions.
џMUTE — turn the sound on/off.
5. Learn other buttons of your RC the same way if needed (repeat steps 3 and 4).
4. Press a button on your RC (one of 5 learnable buttons in the TV section). This button will
be programmed to generate the just learned IR signal. The LED on your RC will light up
again. This means that your RC is again in the learning mode.
3. Press and hold a button on the other RC until the LED on your RC starts blinking. This
means that your RC has learned the IR signal of this button.
2. Put the IR emitter of the other RC in 3-5 cm opposite to the IR receiver of your RC.
1. Press and hold "SET" button on your RC until the LED near the "POWER" button on your
RC lights up. This indicates that your RC has entered into the learning mode.
To program these buttons, perform the following steps:
The TV section on the remote control (RC) has 5 learnable buttons (UP, DOWN, AV IN, TV
INFO, TV POWER), which can be programmed to control your TV or other equipment.
Buttons are learned by IR signals from another IR remote control.
Learning remote control
6. Press the "SET" button on your RC again to exit the learning mode.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any inte rference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance
20cm between the radiator and your body.
-
1
-
2
-
3
Dune HD Pro Vision 4K Solo is a powerful media player that offers a wide range of features for enjoying your favorite content. With its 4K resolution support, you can experience stunning visuals and lifelike images. The player also supports a variety of audio formats, including Dolby Atmos and DTS-HD Master Audio, so you can enjoy immersive sound quality. With built-in Wi-Fi and Ethernet connectivity, you can easily stream content from your home network or the internet.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Dune HD Pro Vision 4K Solo User guide
-
Dune HD DUNE-HD 4897031343215 Max Vision 4K User manual
-
Dune HD Magic 4K Plus User guide
-
HDI Dune MAX User manual
-
-
HDI Dune HD Lite 53D User manual
-
-
-
-
Other documents
-
HDI Dune BD Prime 3.0 500GB User manual
-
DUNE HD Base 3.0 User manual
-
-
Sony RM-AV2500 User manual
-
Mitsubishi Electronics 246 Series User manual
-
Mitsubishi Electric LT-46148 User manual
-
-
Sony RM-AV2000 User manual
-
-
Mitsubishi WD-65736 User manual
