AVer AVerVision100 Pro User manual

English

FCC NOTICE

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial,

industrial or business environment. This equipment can generate, use and radiate radio frequency energy and, if not

installed and used in accordance with the instruction, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures :

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device

may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

CAUTION ON MODIFICATIONS

To comply with the limits for the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be

installed in computer equipment certified to comply with the Class B limits. All cables used to connect the computer and

peripherals must be shielded and grounded. Operation with non-certified computers or non-shielded cables may result in

interference to radio or television reception.

Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to

operate the equipment.

CE NOTICE

This is a Class B product.

DISCLAIMER

No warranty or representation, either expressed or implied, is made with respect to the contents of this documentation,

its quality, performance, merchantability, or fitness for a particular purpose. Information presented in this documentation

has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. The information

contained in this documentation is subject to change without notice.

In no event will AVerMedia be liable for direct, indirect, special, incidental, or consequential damages arising out of the

use or inability to use this product or documentation, even if advised of the possibility of such damages.

TRADEMARKS

AVerMedia and AVerVision are registered trademarks of AVerMedia TECHNOLOGIES, Inc. IBM PC is a registered

trademark of International Business Machines Corporation. Macintosh is a registered trademark of Apple Computer, Inc.

Microsoft is a registered trademark and Windows is a trademark of Microsoft Corporation. All other products or corporate

names mentioned in this documentation are for identification and explanation purposes only, and may be trademarks or

registered trademarks of their respective owners.

COPYRIGHT

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without

the written permission of AVerMedia TECHNOLOGIES, Inc.

English

T

a

b

l

e

o

f

C

o

n

t

e

n

t

s

Introduction ..............................................................................................E-1

Where to use the AVerVision110 ............................................................E-2

What’s in the Package .............................................................................E-3

Hardware Installation and Setup ............................................................E-4

Connection Ports...........................................................................................................E-4

Connecting a TV or LCD/DLP projector and Video Recorder.......................................E-4

Connecting a Microphone..............................................................................................E-5

Connecting the Power Adapter......................................................................................E-5

Connecting to a Microscope..........................................................................................E-5

Connecting the Optional Light and Document Positioning Pointer ...............................E-6

Connecting the Optional Light Box................................................................................E-6

Making Adjustments................................................................................E-7

Flexible Gooseneck, Mechanical Arm and Camera Head ............................................E-7

Using the Optional Anti-glare.........................................................................................E-7

Using the Infrared Remote Control ........................................................E-8

Replacing the Remote Control Battery ..................................................E-8

The Control Panel Buttons and their Functions ...................................E-9

Touch Button Control Panel .........................................................................................E-9

Infrared Sensor..............................................................................................................E-9

Menu Functions.............................................................................................................E-10

Troubleshooting ......................................................................................E-12

Limited Warranty .....................................................................................E-13

E-1

English

Thank you for purchasing the

. This portable document

camera displays document or 3D objects onto

any TV or LCD/DLP projector with AV

(composite) or S-video input.

is an advanced and efficient way to deliver

educational content to students and make

interactive learning a reality in class. You will

appreciate how easy it is to setup and use. The

flexible gooseneck design and microscope

lens adapter allow you to easily connect it to a

microscope. What's more, you can also

connect a microphone and a backlight feature

which helps improve the image by reducing

the glare from the background light.

AVerMedia

AVerVision110

E-2

W

h

e

r

e

t

o

u

s

e

t

h

e

A

V

e

r

V

i

s

i

o

n

1

0

S

c

i

e

n

c

e

L

a

b

R

e

s

e

a

r

c

h

No need to peep into a

microscope’s eyepiece. You can

instantly convert the

A

V

e

r

V

i

s

i

o

n

1

0

into a

c

o

l

o

r

d

i

g

i

t

a

l

m

i

c

r

o

s

c

o

p

e

c

a

m

e

r

a

and view microscopic objects

on TV by simply connecting the

A

V

e

r

V

i

s

i

o

n

1

0

with a

microscope.

T

e

a

c

h

i

n

g

A

i

d

A

V

e

r

V

i

s

i

o

n

1

0

0 creates

an interactive learning

environment for classes.

In geography class, teachers do not

need to not bring large and heavy

printed maps on a canvas or have it

drawn on a large sized paper.

A

V

e

r

V

i

s

i

o

n

1

0

0 instantly displays

p

r

i

n

t

e

d

m

a

t

e

r

i

a

l

s

s and

t

h

r

e

-

d

i

m

e

n

s

i

o

n

a

l

l objects

such as a globe.

M

e

d

i

c

a

l

A

p

l

i

c

a

t

i

o

n

s

By connecting the

A

V

e

r

V

i

s

i

o

n

1

0

to an optional lightbox doctors can

analyze and view

x

-

r

a

y

f

i

l

m

s

on a big

screen. Plus you can also use

transparencies or display

negative film in a

positive format.

A

c

t

u

a

l

P

r

o

d

u

c

t

D

e

m

o

N

o

m

o

r

e

c

r

o

w

d

e

d

c

o

u

n

t

e

r

s

!

Demonstrate your products

with the

A

V

e

r

V

i

s

i

o

n

1

0

0. It easily

displays your products

to a large

crowd.

A

V

e

r

V

i

s

i

o

n

1

0

makes

it convenient for you

and your audience.

E-3

E

n

g

l

i

s

h

W

h

a

t

’

s

i

n

t

h

e

P

a

c

k

a

g

e

Remote Control

(battery included)

U

s

e

r

’

s

M

a

n

u

a

l

D

o

c

u

m

e

n

t

C

a

m

e

r

a

This User’s Manual

AVerMedia® AVerVision110 Unit

2 Microscope Lens

Adapter

(34 and 28mm)

Video Cable (RCA)

Audio Cable

S-Video Cable

Power Adapter

Power Cord

* The power cable will vary depending on

the standard power outlet of the country

where it is sold.

1 Anti-glare sheet

O

p

t

i

o

n

a

l

A

c

e

s

o

r

i

e

s

Light and Document

Positioning Pointer

Light box

RCA to SCART Cable

E-4

H

a

r

d

w

a

r

e

I

n

s

t

a

l

a

t

i

o

n

a

n

d

S

e

t

u

p

C

o

n

e

c

t

i

o

n

P

o

r

t

s

The ports on the back and side panel of the

A

V

e

r

V

i

s

i

o

n

1

0

are for connecting the unit to a TV or LCD/ DLP projector

with an AV (composite) or s-video input, speaker, microphone and other devices. Illustrated below are the ports that are

located at the back and side panel of the

A

V

e

r

V

i

s

i

o

n

1

0

with their corresponding labels.

AUDIO

This port allows you to output audio signal.

MIC

Φ

6.3mm jack) Plug the Microphone (

into this port.

S-VIDEO or VIDEO

These ports allow you to output video signal using either s-video or AV.

LIGHT BOX

Plug the optional Light Box into this port

.

POWER

Plug the Power Adapter into this port.

C

o

n

e

c

t

i

n

g

a

T

V

o

r

L

C

D

/

D

L

P

r

o

j

e

c

t

o

r

a

n

d

V

i

d

e

o

R

e

c

o

r

d

e

r

You can instantly display the video signal from the

A

V

e

r

V

i

s

i

o

n

1

0

0 on a TV or LCD/DLP projector with s-video or video

inputs. If you have SCART RGB TV, you need to use the optional RCA-to-SCART cable. For better video quality, we

strongly suggest that you use S-Video or SCART RGB to output video signal on a TV or LCD/DLP projector.

A

VerMedia AVerVision110

Videotape

Hard disk

VCR

PCI Video

Capture Card

Computer

Audio Cable

S-Video Cable

Video Cable

RCA to SCART

Cable

(optional)

CD or any

storage disk

IN OUT

IN

Television

LCD/DLP Projector

OR

TIP: If the output device has video or s-video and audio output ports, you can connect it to a VCR (video recorder) or a PCI

video capture card to record the video and audio signals from the AVerVision110 on a videotape or in digital computer format

(For more details, please refer to your TV, and video recorder or PCI capture card manuals).

E-5

E

n

g

l

i

s

h

C

o

n

e

c

t

i

n

g

a

M

i

c

r

o

p

h

o

n

e

A Microphone is not included in this package. Please purchase one with a φ 6.3mm jack.

AVerMedia AVerVision11

0

Microphone

(not supplied)

C

o

n

e

c

t

i

n

g

t

h

e

P

o

w

e

r

A

d

a

p

t

e

r

Use a standard 100V~240V AC power source.

AVerMedia AVerVision110

Power Adapter

Power Cord

Wall

Outlet

C

o

n

e

c

t

i

n

g

t

o

a

M

i

c

r

o

s

c

o

p

e

Connecting the

A

V

e

r

V

i

s

i

o

n

1

0

0 to a microscope allows you to examine microscopic objects on a TV or a LCD/DLP

projector without straining your eyes.

Microscope

AVerMedia AVerVision110

Microscope Lens

Adapter

E-6

C

o

n

e

c

t

i

n

g

t

h

e

O

p

t

i

o

n

a

l

L

i

g

h

t

a

n

d

D

o

c

u

m

e

n

t

P

o

s

i

t

i

o

n

i

n

g

P

o

i

n

t

e

r

The optional Light and Document Positioning Pointer provides additional lighting and the four (4) red diodes that can be

used to demarcate the viewing area enabling you to correctly position the object. It even allows you to switch to three

different lightings.

Light and Document

Positioning Pointer

(optional)

Press the latch here to detach

the Light and Document Positioning

Pointer from the camera head.

Document

Positioning

Pointer only

Protective

Lens

Adapter

U

N

S

C

R

E

W

S

C

R

E

W

Remove the sticker then

attach the Light and

Document Positioning Pointer.

White LED and

Document

Positioning Pointer

White LED

Only

I

n

s

t

a

l

i

n

g

t

h

e

O

p

t

i

o

n

a

l

L

i

g

h

t

B

o

x

Connecting an optional light box allows you to view x-rays, transparencies and negative slides. To display the negative

film in a positive format, you need to switch

A

V

e

r

V

i

s

i

o

n

1

0

0 to display the image in negative mode (look for the

negative/positive button either on the remote or touch button control panel), adjust the camera head closer to the film and

refocus.

AVerMedia

AVerVision110

Light Box

(optional)

PLUG IT

HERE

E-7

English

M

a

k

i

n

g

A

d

j

u

s

t

m

e

n

t

s

This section provides illustrated useful tips on how to adjust the AVerVision110 to meet your needs.

F

l

e

x

i

b

l

e

G

o

s

e

n

e

c

k

,

M

e

c

h

a

n

i

c

a

l

A

r

m

a

n

d

C

a

m

e

r

a

h

e

a

d

The flexible gooseneck and mechanical arm design allows you to position the camera head from any angle. You can also

manually adjust the focus from here to improve the quality of the pictures.

45 degrees

90 degrees

45 degrees

Adjust the focus here

U

s

i

n

g

t

h

e

o

p

t

i

o

n

a

l

A

n

t

i

-

g

l

a

r

e

The optional anti-glare sheet is a special coated film that helps eliminate the light reflection when you are displaying very

shiny objects or glossy surfaces such as magazines, etc. Simply place the anti-glare sheet on top of the shiny document

to reduce reflected light.

E-8

U

s

i

n

g

t

h

e

I

n

f

r

a

r

e

d

R

e

m

o

t

e

C

o

n

t

r

o

l

The

A

V

e

r

V

i

s

i

o

n

1

0

0's remote has controls that allow you access menu functions to enhance your camera presentation,

screen effects and switching the unit on/off. The figure and description below show you how to use the remote control.

Up, Down, Left and Right Arrows

Use these buttons to adjust the settings of

the MENU functions

.

COLOR/B.W.

Convert color image to monochrome

and revert back to color.

NEG/POS

Display the image captured by the camera

into either a negative, or positive

(true color) format.

MENU

Opens the menu with all the functions.

(Refer to the section, for more details.)Menu Functions,

POWER

Switches the AVerVision110 on/off.

AVerVision 110

RM-CH

MENU

NEG/POS COLOR/B.W.

R

e

p

l

a

c

i

n

g

t

h

e

R

e

m

o

t

e

C

o

n

t

r

o

l

B

a

t

e

r

y

Use Lithium CR2025 3V battery.

Press the latch here to unlock.

Pull the battery holder.

Make sure the positive sign is facing up.

J

A

P

A

N

E-9

English

T

h

e

C

o

n

t

r

o

l

P

a

n

e

l

B

u

t

o

n

s

a

n

d

t

h

e

i

r

F

u

n

c

t

i

o

n

s

T

o

u

c

h

B

u

t

o

n

C

o

n

t

r

o

l

P

a

n

e

l

The Touch Button Control Panel located on the top and side of AVerVision110 provides quick access to commonly

used functions.

AVerMedia

COLOR/BW

MENU

NEGATIVE/

POSITIVE

AVerVision 110

MEN

U

Opens the menu with all the functions.

(Refer to the section, Menu Functions,

for more details.)

LED

On normal operations a green LED will be lit,

in standby mode the color of the LED will be red.

NEGATIVE/POSITIVE

Display the image captured by the camera into

either in negative, or positive (true color).

COLOR/BW

Convert the color image to monochrome and revert

back to color.

Power

Turn the on/off

AVerVision110

Right and Down Arrows

Use these buttons to adjust the settings

of the MENU functions

.

I

n

f

r

a

r

e

d

S

e

n

s

o

r

When using the remote control, aim it at the Infrared Sensor, which is located at the font panel of the AVerVision110.

AVerMedia AVerVision110

AVerMedia

A

VerV is io n 110

E-10

M

e

n

u

F

u

n

c

t

i

o

n

s

A

V

e

r

V

i

s

i

o

n

1

0

0 has a MENU that allows you to access functions for fine-tuning your screen display. Press the MENU

button to call up and exit from the main menu or sub-menu display. Then use ▲or▼ buttons to select the items in the

menu list. Use ► button to enter sub-menu. To adjust the setting, press ◄or► buttons.

Main Menu On Screen Display Description

BRIGHTNESS

Press ►or◄ buttons to increase or decrease the brightness

level and improve the image visibility. The brightness level can

be adjusted from 1 to 16.

Use ▲or▼ buttons to select between Auto or Manual and then

press ► to make the selection.

AVerVision110 allows you to automatically or manually adjust the

CCD camera to determine how much light is required.

EXPOSURE

If you choose to manually adjust the exposure, press ►or◄

buttons to adjust the exposure level. The exposure level can be

adjusted from 1 to 8.

This feature will be automatically set to auto when the Backlight is

turned on.

WB

CONTROL

(White

Balance)

Use ▲or▼ buttons to select between Auto or Manual and then

press ► to make the selection.

AVerVision110 allows you to automatically or manually adjust the

CCD camera to suit the lighting condition or color temperature. If

you select to manually adjust the white balance, you can adjust the

Red, Blue or let the system measure the color temperature. The

Red and Blue color temperature can be adjusted from 1 to 256.

To obtain a more accurate color balance, place a sheet of white

paper under the camera. Select MEASURE, then press ► button to

calibrate the color temperature. The word “ON” will blink, then wait

until it stops and the word “OFF” will appear.

This feature will not be available when you are in B/W mode.

E-11

English

BACKLIGHT

Press ►or◄ buttons to turn on or off this feature.

If there is a strong lighting coming from behind the main object

and appears too dark, simply turn on this function and

AVerVision110 will automatically fine-tune the exposure allowing

you to clearly see the object.

DEFAULT

(PAL)

(NTSC)

Use ▲or▼ buttons to select YES to restore to original

factory default setting or NO to exit then press ► to make

the selection.

The restoration default for NTSC is customized depending

on locality to match the AC power frequency. You can

select either to restore YES Universal, YES America, or

YES Kanto Japan.

E-12

T

r

o

u

b

l

e

s

h

o

t

i

n

g

This section provides many useful tips on how to solve common problems while using the

A

V

e

r

V

i

s

i

o

n

1

0

0.

There is no picture on TV or LCD/DLP projector screen.

1. Check all the connectors again as shown in this manual.

2. Check the TV or LCD/DLP projector remote control’s on/off switch.

3. Verify the setting of the TV or LCD/DLP projector video source and channel setting.

4. If you are using a SCART connection, check the SCART input of your TV set.

I have set up the

A

V

e

r

V

i

s

i

o

n

1

0

0 and checked all the connections as

specified in the manual, but I can not get a picture on the preferred

presentation screen.

-

A

V

e

r

V

i

s

i

o

n

1

0

is in the "Standby" mode once power is connected. You need to switch

A

V

e

r

V

i

s

i

o

n

1

0

"ON", either from the remote control or from its touch button control panel to display the picture on the

presentation screen.

The picture on the presentation screen is distorted or the image is blurry.

1. Before doing any adjustments, reset all the picture attributes to the factory default setting

(Refer to the Menu Functions, for more details).

2. Use the Brightness and WB control menu functions to improve the picture quality.

3. If you discover that the camera picture seems a little blurry or out of focus. Adjust the focus

found at the side of the camera head.

There is no sound.

1. Check all of the connectors again as shown in this manual. (Pleas also refer to the TV or

LCD/DLP projector’s audio connection.)

2. Check the Microphone’s on/off switch.

3. Verify the volume setting of the TV or LCD/DLP projector is not muted.

4. Adjust the volume of the TV or LCD/DLP projector.

E-13

English

1. Limited Warranty:

For a period of time beginning on the date of purchase of the applicable product and extending as set forth in Section

6 of this Limited Warranty (the “Warranty Period”), AVerMedia Technologies, Inc. (“AVerMedia”) warrants that the

applicable product (“Product”) substantially conforms to AVerMedia’s documentation for the product and that its

manufacture and components are free of defects in material and workmanship under normal use. “You” as used in

this agreement means you individually or the business entity on whose behalf you use or install the product, as

applicable. This limited warranty extends only to You as the original purchaser. Except for the foregoing, the Product

is provided “AS IS.” In no event does AVerMedia warrant that You will be able to operate the Product with-out

problems or interruptions, or that the Product is suitable for your purposes. Your exclusive remedy and the entire

liability of AVerMedia under this paragraph shall be, at AVerMedia’s option, the repair or replacement of the Product

with the same or a comparable product. This warranty does not apply to (a) any Product on which the serial number

has been defaced, modified, or removed, or (b) car-tons, cases, batteries, cabinets, tapes, or accessories used with

this product. This warranty does not apply to any Product that has suffered damage, deterioration or malfunction due

to (a) accident, abuse, misuse, neglect, fire, water, lightning, or other acts of nature, commercial or industrial use,

unauthorized product modification or failure to follow instructions included with the Product, (b) misapplication of

service by someone other than the manufacturer’s representative, (c) any shipment damages (such claims must be

made with the carrier), or (d) any other causes that do not relate to a Product defect. The Warranty Period of any

repaired or replaced Product shall be the longer of (a) the original Warranty Period or (b) thirty (30) days from the

date of delivery of the repaired or replaced Product.

2. Limitations of Warranty:

AVerMedia makes no warranties to any third party. You are responsible for all claims, damages, settlements,

expenses, and attorneys’ fees with respect to claims made against You as a result of Your use or misuse of the

Product. This warranty applies only if the Product is installed, operated, maintained, and used in accordance with

AVerMedia specifications. Specifically, the warranties do not ex-tend to any failure caused by (i) accident, unusual

physical, electrical, or electro-magnetic stress, neglect or misuse, (ii) fluctuations in electrical power beyond

AVerMedia specifications, (iii) use of the Product with any accessories or options not furnished by AVerMedia or its

authorized agents, or (iv) installation, alteration, or repair of the Product by anyone other than AVerMedia or its

authorized agents.

3. Disclaimer of Warranty

EXCEPT AS EXPRESSLY PROVIDED OTHERWISE HEREIN AND TO THE MAXIMUM EXTENT PERMITTED

BY APPLICABLE LAW, AVERMEDIA DIS-CLAIMS ALL OTHER WARRANTIES WITH RESPECT TO THE

PRODUCT, WHETHER EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT

LIMITATION, SATISFACTORY QUALITY, COURSE OF DEALING, TRADE USAGE OR PRACTICE OR THE

IMPLIED WARRANTIES OF MER-CHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONIN-

FRINGEMENT OF THIRD PARTY RIGHTS.

E-14

4. Limitation of Liability

IN NO EVENT SHALL AVERMEDIA BE LIABLE FOR INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,

PUNITIVE, OR CONSEQUENTIAL DAMAGES OF ANY NATURE INCLUDING, BUT NOT LIMITED TO, LOSS OF

PROFITS, DATA, REVENUE, PRODUCTION, OR USE, BUSINESS INTERRUPTION, OR PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES ARISING OUT OF OR IN CONNECTION WITH THIS LIMITED

WARRANTY, OR THE USE OR PERFORMANCE OF ANY PRODUCT, WHETHER BASED ON CON-TRACT OR

TORT, INCLUDING NEGLIGENCE, OR ANY OTHER LEGAL THEORY, EVEN IF AVERMEDIA HAS ADVISED

OF THE POSSIBILITY OF SUCH DAMAGES. AVERMEDIA’S TOTAL, AGGREGATE LIABILITY FOR DA-MAGES

OF ANY NATURE, REGARDLESS OF FORM OF ACTION, SHALL IN NO EVENT EXCEED THE AMOUNT PAID

BY YOU TO AVERMEDIA FOR THE SPECIFIC PRODUCT UPON WHICH LIABILITY IS BASED.

5. Governing Law and Your Rights

This warranty gives You specific legal rights; you may also have other rights granted under state law. These rights

vary from state to state.

Section 6

Warranty Period of AVerMedia Product Purchased:

AVerVision110: 2 Year Limited Parts and Labor.

All other AVerVision Products*: 3 Year Limited Parts and Labor.

All other AVerMedia Products: 1 Year Limited Parts and Labor.

All AVerVision Accessories: 1 Year Parts and Labor.

* Except AVerVision DL, 100, 100 Pro – 1 Year Parts and Labor.

CONTACT INFORMATIONS:

http://www.avermedia.com

i

Español

NOTIFICACIÓN FCC

Se ha comprobado que este dispositivo cumple los límites para dispositivos digitales de Clase B según el Apartado 15

de la normativa FCC. Estos límites están diseñados para proporcionar una protección razonable contra las

interferencias perniciosas en entornos comerciales, industriales u empresariales. Este equipo puede generar, utilizar y

emitir energía de radiofrecuencias y, si no se instala y se utiliza de acuerdo con sus instrucciones, puede causar

interferencias perniciosas a las comunicaciones por radio. Sin embargo, no hay garantía alguna de que no se

produzcan interferencias en una instalación concreta. Si este equipo causa interferencias no deseadas a la recepción

de radio o de televisión, lo cual puede determinarse apagando y encendiendo el equipo, se recomienda al usuario

corregir la interferencia tomando estas posibles medidas:

• Cambiar la orientación o la posición de la antena receptora.

• Aumentar la separación entre el equipo y el receptor.

• Conectar el equipo a un enchufe eléctrico que esté en un circuito diferente del receptor.

• Consultar al distribuidor o a un técnico de radio y TV.

Este dispositivo cumple el Apartado 15 de las normas FCC. Su funcionamiento está sujeto a estas dos condiciones: (1)

este dispositivo no puede causar interferencias no deseadas y (2) este dispositivo debe aceptar todas las interferencias

recibidas, incluidas las interferencias que puedan causar un funcionamiento no deseado.

ADVERTENCIA SOBRE MODIFICACIONES

Para cumplir los límites para dispositivos digitales de Clase B, de acuerdo con el Apartado 15 de las normas FCC, este

dispositivo debe instalarse en un sistema informático que garantice el cumplimiento de los límites de la Clase B. Todos

los cables utilizados para conectar el equipo informático y los periféricos deben ser apantallados y estar conectados a

tierra. La utilización de este dispositivo con equipos no garantizados o con cables no apantallados puede causar

interferencias en la recepción de radio y televisión.

Cualquier cambio o modificación no aprobado expresamente por el fabricante de este dispositivo podría invalidar el

derecho del usuario a utilizarlo.

NOTA DE CE

Este es un producto de Clase B.

DECLINACIÓN DE RESPONSABILIDAD

No se ofrece garantía alguna, ni implícita ni explícita, en relación con el contenido de esta documentación, su calidad,

sus prestaciones, su comerciabilidad ni su adecuación para un propósito particular. Se ha verificado cuidadosamente la

información presentada en esta documentación para garantizar su fiabilidad pero, sin embargo, no se asume

responsabilidad alguna por las posibles imprecisiones que pueda contener. La información contenida en esta

documentación está sujeta a cambio sin aviso previo.

Bajo ninguna circunstancia será AVerMedia



responsable por daños directos, indirectos, especiales, resultantes

causados por la utilización, correcta o incorrecta, de este producto o su documentación, incluso aunque se avisara

previamente del riesgo de que se causaran estos daños.

MARCAS COMERCIALES

AVerMedia y AVerVision son marcas registradas de AVerMedia TECHNOLOGIES, Inc. PC IBM es una marca

registrada de International Business Machines Corporation. Macintosh es una marca registrada de Apple Computer, Inc.

Microsoft es una marca registrada y Windows es una marca de Microsoft Corporation. Todos los otros productos o

nombres corporativos mencionados en este documento están sólo para propósitos identificativos y explicativos, y son

marcas o marcas registradas de sus respectivos propietarios.

Page is loading ...

S-6

C

o

n

e

x

i

ó

n

d

e

l

a

L

u

z

y

d

e

l

A

p

u

n

t

a

d

o

r

d

e

U

b

i

c

a

c

i

ó

n

d

e

D

o

c

u

m

e

n

t

o

s

,

o

p

c

i

o

n

a

l

e

s

La Luz y el Apuntador de Ubicación de Documentos, opcionales proporcionan iluminación adicional y los cuatro (4)

diodos rojos que se pueden usar para demarcar el área de visión, permiten ubicar correctamente el objeto. Permiten

incluso cambiar a tres iluminaciones distintas.

Presionar el seguro aquí para liberar

la Luz y el Indicador de Ubicación de

Documentos desde la cabeza

de la cámara.

Luz y Apuntador de

Ubicación de

Documento

(opcional)

Indicador de

Ubicación de

Documentos

solamente

A

daptador de

Protección

de la Lente

Quitar el adhesivo y sujetar

el Indicador de Ubicación

de Documentos.

LED Blando e

Indicador de

Ubicación de

Documentos

LED Blanco

solamente

DESENROSCAR

AQUÍ

I

n

s

t

a

l

a

c

i

ó

n

d

e

u

n

a

M

e

s

a

d

e

L

u

z

,

O

p

c

i

o

n

a

l

El conectar una mesa de luz, opcional, permite ver radiografías, transparencias y películas negativas. Para mostrar la

película negativa en un formato positivo, alterne

A

V

e

r

V

i

s

i

o

n

1

0

0 para exhibir la imagen en el modo negativo (vea el botón

negativo / positivo en el control remoto o en el panel con botones de contacto), ajuste la cabeza de la cámara más

cerca de la película y enfoque nuevamente.

AVerMedia

AVerVision110

ENCENDER

Mesa de Luz

(opcional)

CONECTARLA

AQUÍ

Page is loading ...

F-14

L’EXÉCUTION DE N'IMPORTE QUEL PRODUIT, SI BASÉ SUR LE CONTRAT OU LE TORT, Y COMPRIS LA

NÉGLIGENCE, OU N'IMPORTE QUELLE AUTRE THÉORIE LÉGALE, MÊME SI AVERMEDIA A CONSEILLÉ DE

LA POSSIBILITÉ de TELS DOMMAGES. TOUTE LA RESPONSABILITÉ GLOBALE D’AVERMEDIA POUR LES

DOMMAGES DE N'IMPORTE QUELLE NATURE, INDÉPENDAMMENT DE LA FORME D'ACTION, EXCÉDERA

DANS AUCUN CAS LA QUANTITÉ PAYÉE PAR VOUS À AVERMEDIA POUR LE PRODUIT SPÉCIFIQUE SUR

LEQUEL LA RESPONSABILITÉ EST BASÉE.

5. Période de garantie du produit achetée d'AVerMedia:

AVerVision110: 2 ans de pièces et travail limités.

Tous autres produits AVerVision*: 3 ans de pièces et travail limités.

Tous autres produits AVerMedia: 1 an de pièces et travail limités.

Tous les Accessoires D'AVerVision: 1 an de pièces et travail limités.

* Excepté AVerVision DL, 100, 100 Pro: 1 an de pièces et travail limités.

INFORMATIONS DE CONTACT:

http://www.avermedia.com

Page is loading ...

AVer AVerVision100 Pro User manual

This manual is also suitable for

AVer AVerVision100 Pro User manual

in other languages

Related papers

Other documents