Shure 54 User manual

54
Shure
Brand
Shure
Model
54
Category
Microphones
Type
User manual

This manual is also suitable for

The Shure WBH54T is a wireless headworn microphone system that provides reliable and clear audio reproduction for vocal performances. Its supercardioid polar pattern reduces background noise and feedback, making it ideal for loud stage environments. With a lightweight and adjustable headband, the WBH54T offers a comfortable and secure fit during extended use. The included snap-fit foam windscreens minimize breath and wind noise, ensuring pristine audio quality.

The Shure WBH54T is a wireless headworn microphone system that provides reliable and clear audio reproduction for vocal performances. Its supercardioid polar pattern reduces background noise and feedback, making it ideal for loud stage environments. With a lightweight and adjustable headband, the WBH54T offers a comfortable and secure fit during extended use. The included snap-fit foam windscreens minimize breath and wind noise, ensuring pristine audio quality.

Models BETA 53 ™ and BETA 54 ™
Wired Micophones
©2010 Shure Incorporated
27A14144 (Rev. 2)
Printed in U.S.A.
BETA 53
BETA 54
Headworn Vocal Microphones
Microphones serre-tête pour la voix
Kopfbügel-Gesangsmikrofone
Micrófonos vocales con diadema
Microfoni con supporto attorno alla testa per voce
Головные вокальные микрофоны
ボーカル用ヘッドウォーンマイクロホン
헤드원 보컬 마이크
多个头戴式人声话筒
1
Introduction
Shure models BETA 53 and BETA 54 are subminiature, electret condenser headworn microphones.
They provide uncompromised sound quality and reliability with minimal visibility in applications such
as broadcast, theater, and touring. Despite their small size, each microphone’s condenser element
delivers full, clear, and natural reproduction of speech and vocals. The microphone features a du-
rable, low-profile wire frame headband which is fully adjustable for stability and comfort. A plastic car-
rying case protects the microphone and its accessories.
BETA 53 Features
• Omnidirectional polar pattern for minimal handling noise and flexible microphone placement
• Extended, flat frequency response provides accurate speech and vocal reproduction
• Two interchangeable protective caps for response shaping
• Foam windscreens minimize breath noise and “popping”
• Available with an in-line preamp or with a TA4F connector for wireless applications
• Choice of black or tan finish to suit your performance environment
BETA 54 Features
• Supercardioid polar pattern provides maximum gain-before-feedback and ambient rejection
• Extended frequency response tailored for vocal performances
• Able to handle extremely high sound pressure levels (SPL)
• Snap-fit foam windscreens stay in place during intensive movement
• Available with an in-line preamp or with a TA4F connector for wireless applications
• Choice of black or tan finish to suit your performance environment
2
Beta 53 Models
• Omnidirectional
• For broadcast and stage
• Black finish
• Detachable in-line preamp for wired
applications
• Requires phantom power
Wireless Models
These models are for use with Shure wireless microphone systems.
TA4F connector attaches to wireless bodypacks (in-line preamp not
included).
• WBH53B (black)
• WBH53T (tan)
Accessories
All models include: microphone and headband (1 each), foam
windscreens (2), standard protective cap (2), filtered protective
cap (2), swiveling lapel clip (1), boom holder (2), logo pad (1) and
plastic carrying case (1).
Accessories
All models include: microphone and headband (1 each), snap-fit foam
windscreens (2), standard protective cap (2), swiveling lapel clip (1),
boom holder (2), logo pad (1) and plastic carrying case (1).
Available Models
Beta 54 Models
• Supercardioid
• For stage and vocal performance
• Black finish
• Detachable in-line
preamp for wired
applications
• Requires
phantom
power
Wireless Models
These models are for use with Shure wireless microphone systems.
TA4F connector attaches to wireless bodypacks (in-line preamp not
included).
• WBH54B (black)
• WBH54T (tan)
3
Adjusting the Headband and Microphone
① Adjust headband width
② Adjust boom height
③ Adjust boom length
④ Do not attempt to bend the microphone boom!
⑤ “Roll” the boom for subtle adjustments of microphone position
4
Using the Windscreens and Protective Caps
Windscreen
Grip the internal frame of the windscreen firmly when connecting
or removing. Do not pull on the foam itself.
• To connect, push the windscreen until it snaps into place over
the cartridge.
• To remove, pull the windscreen directly off of the cartridge.
Protective Caps
Standard protective cap:
• Gold mesh
• No attenuation
Filtered protective cap:
• Silver mesh
• Attenuates high frequencies
Care and Maintenance
• Foam windscreens may be cleaned with soap and water.
• For the best sound quality, replace damaged or clogged
protective caps and windscreens.
Important: Always use the BETA 54
with the standard protective cap only.
Using the microphone with no cap,
or with the filtered cap, will degrade
sound quality and alter the micro-
phone’s polar pattern.
5
Positioning the Microphone
BETA 53
• Position the omnidirectional
BETA 53 microphone near the
corner of the mouth
• If necessary, roll the boom to
avoid contact with skin and
facial hair
BETA 54
• Point the directional BETA
54 microphone at the
corner of the mouth
6
Wearing the Microphone on Either Side
The microphone boom may be reinstalled to position it on the left or right side of the head.
• Carefullydetachtheboomholder①,logopad②,andmicrophonecable③fromtheheadband.
• Reattachtheboomholdertotheoppositesideofthewireframe④.
• Reattachthelogopad⑤andmicrophonecable⑥.
1
2
3
7
Component Black Tan
① Foam Windscreen (5 pieces) RPM304 RPM306
② Standard Protective Cap (gold mesh) (5 pieces) RPM208 RPM212
Filtered Protective Cap* (silver mesh) (5 pieces) RPM220 RPM214
③ Microphone/Boom Assembly with TA4F Connector (1 piece) RPM132 RPM134
④ Swiveling Lapel Clip (5 pieces) RPM510 RPM512
⑤ Boom Holder and Logo Pad (2 each) RPM570 RPM580
⑥ Headband (1 piece, with boom holder and logo pad) RPM550 RPM560
⑦ 4-Pin Mini Connector (TA4F) (1 piece) WA331**
⑧ In-Line Preamp (1 piece) RPM626**
*See the frequency response curve on page 74
**Available in black only
BETA 53 Replacement Parts and Accessories
8
BETA 54 Replacement Parts and Accessories
Component Black Tan
① Microphone/Boom Assembly with TA4F Connector (1 piece) RPM646 RPM648
② Standard Protective Cap (gold mesh) (5 pieces) RPM208 RPM212
③ Snap-fit Foam Windscreen (4 pieces) RPM316 RPM318
④ Swiveling Lapel Clip (5 pieces) RPM510 RPM512
⑤ Boom Holder and Logo Pad (2 each) RPM570 RPM580
⑥ Headband (1 piece, with boom holder and logo pad) RPM550 RPM560
⑦ 4-Pin Mini Connector (TA4F) (1 piece) WA331*
⑧ In-Line Preamp (1 piece) RPM626*
*Available in black only
73
Wiring Diagram
Microphone Cartridge
5
Case (ground)
4
Shield (ground)
3
Red
1
(+5Vdc)
Black (audio out)
2
Wireless Test Circuit
6
+5Vdc
100k
20k
1.0 uf
1
2
3
4
1
2
3
4
2SK1109
1. Rouge
2. Noir (sortie audio)
3. Blindage (masse)
4. Corps (masse)
5. Capsule de microphone
6. Circuit d’essai sans fil
+
–
1. Rot
2. Schwarz (Audioausgang)
3. Abschirmung (Masse)
4. Gehäuse (Masse)
5. Mikrofonkapsel
6. Prüfkreis des Drahtlossystems
1. Rojo
2. Negro (salida de audio)
3. Blindaje (tierra)
4. Chasis (tierra)
5. Cápsula de micrófono
6. Circuito de prueba de sistema inalámbrico
1. Rosso
2. Nero (uscita audio)
3. Schermatura (massa)
4. Involucro (massa)
5. Capsula
6. Circuito per test wireless
74
BETA 53 BETA 54
20 200001000 1000050 100
98765432 98765432
+10
0
–10
Hz
dB
–20
+20
Standard Protective Cap
Filtered Protective Cap
20 200001000 1000050 100
98765432 98765432
+10
0
–10
Hz
dB
15 mm (.6 in)
606 mm (2 ft)
+20
–20
–30
0º
125º
Standard Cap
1
Filtered Cap
2
1
Capuchon standard
2
Capuchon à ltre
1
Standardmäßige Kappe
2
Gelterte Kappe
–
5 dB
–10 dB
–
1
5 dB
–20 dB
500 Hz
1000 Hz
250 Hz
–
5
dB
–10 dB
–15 dB
–20 dB
2.5 kHz
6.3 kHz
10 kHz
1
Tapa estándar
2
Tapa con ltro
1
Cappuccio standard
2
Cappuccio dotato di ltro
標準キャップ
1
フィルタ付きキャップ
2
–5 dB
–10 dB
–15 dB
–20 dB
500 Hz
1000 Hz
250 Hz
–5 dB
–10 dB
–15 dB
–20 dB
2.5 kHz
6.3 kHz
10 kHz
75
CERTIFICATION
Eligible to bear CE Marking. Conforms to European EMC Directive
2004/108/EC. Meets Harmonized Standards EN55103-1:1996
and EN55103-2:1996, for residential (E1) and light industrial (E2)
environments.
The Declaration of Conformity can be obtained from:
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Wannenacker Str. 28
D-74078 Heilbronn, Germany
Phone: +49 7131 72 14 0
Fax: +49 7131 72 14 14
Email: [email protected]
HOMOLOGATION
Autorisé à porter la marque CE. Conforme à la directive euro-
péenne CEM 2004/108/CE. Conforme aux normes harmonisées
EN55103-1:1996 et EN55103-2:1996 pour les environnements
résidentiels (E1) et d’industrie légère (E2).
La déclaration de conformité peut être obtenue de l’adresse
suivante:
Représentant agréé européen :
Shure Europe GmbH
Siège Europe, Moyen-Orient et Afrique
Homologation EMEA
Wannenacker Str. 28
D-74078 Heilbronn, Germany
Phone: +49 7131 72 14 0
Fax: +49 7131 72 14 14
Email: [email protected]
CERTIFICACIONES
Califica para llevar la marca CE. Cumple con la directiva euro-
pea de EMC 2004/108/EC. Satisface las normas armonizadas
EN55103-1:1996 y EN55103-2:1996 para entornos de uso resi-
dencial (E1) e industrial ligero (E2).
La declaración de conformidad se puede obtener de la siguiente
dirección:
Representante autorizado en Europa:
Shure Europe GmbH
Casa matriz para Europa, Medio Oriente y Africa
Aprobación para región de EMEA
Wannenacker Str. 28
D-74078 Heilbronn, Germany
Phone: +49 7131 72 14 0
Fax: +49 7131 72 14 14
Email: [email protected]
ZERTIFIZIERUNG
Zur CE-Kennzeichnung berechtigt. Entspricht der europäischen
Richtlinie zur elektromagnetischen Verträglichkeit 2004/108/
EG. Entspricht den Anforderungen der harmonisierten Normen
EN55103-1:1996 und EN55103-2:1996 für Wohngebiete (E1) und
Leichtindustriegebiete (E2).
Die Konformitätserklärung ist über die unten stehende Adresse
erhältlich:
Bevollmächtigter Vertreter in Europa:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Abteilung: EMEA-Zulassung
Wannenacker Str. 28
D-74078 Heilbronn, Germany
Tel: +49 7131 72 14 0
Fax: +49 7131 72 14 14
Email: [email protected]
OMOLOGAZIONI
Contrassegnabile con il marchio CE. Conforme alla direttiva euro-
pea sulla compatibilità elettromagnetica 2004/108/CE. Conforme
alle norme armonizzate EN55103-1:1996 ed EN55103-2:1996 per
l’uso in ambienti domestici (E1) e industriali leggeri (E2).
La dichiarazione di conformità può essere ottenuta da:
Rappresentante europeo autorizzato:
Shure Europe GmbH
Sede per Europa, Medio Oriente e Africa
Approvazione EMEA
Wannenacker Str. 28
D-74078 Heilbronn, Germany
Phone: +49 7131 72 14 0
Fax: +49 7131 72 14 14
Email: [email protected]
СЕРТИФИКАЦИЯ
Соответствуеттребованиямдлянанесениямаркировки
CE.Соответствуеттребованиямевропейскойдирективы
2004/108/EECпоЭМС.Соответствуеттребованиям
гармонизированныхстандартовEN55103-1:1996иEN55103-
2:1996дляжилыхрайонов(E1)ирайоновслегкими
промышленнымиусловиями(E2).
Заявлениеосоответствииможнополучитьпоследующему
адресу:
Уполномоченныйевропейскийпредставитель:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Wannenacker Str. 28
D-74078Heilbronn,Germany(Германия)
Телефон:+49713172140
Факс:+497131721414
Эл.почта:[email protected]
认证
允许使用CE标志。符合欧盟EMC法规
2004/108/EC。符合Harmonized标准EN55103-1
：1996和EN55103-2：1996适用于民用(E1)和
轻工业(E2)环境。
可从以下地址获得“符合性声明：
欧洲授权代表：
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Wannenacker Str. 28
D-74078 Heilbronn, Germany
电话：+49713172140
传真：+497131721414
电子邮件：[email protected]
인증
CE마크를사용할자격이있습니다.European
EMCDirective2004/108/EC를준수합니다.가정
용(E1)및경공업용(E2)통일규격(Harmonized
Standards)EN55103-1:1996및EN55103-
2:1996요건들을준수합니다.
적합성선언서를구하실수있는곳:
공인유럽대리점:
Shure Europe GmbH
유럽,중동,아프리카본부
부서:EMEA(유럽중동)승인
Wannenacker Str. 28
D-74078 Heilbronn, Germany
전화:+49713172140
팩스:+497131721414
이메일:[email protected]
認 証
CEマーキングに適格。欧州EMC指令2004/108/
ECに適合。住宅(E1)および軽工業(E2)環境に関
し、EN55103-1:1996およびEN55103-2:1996の
整合規格に対応。
適合宣言書は以下より入手可能です:
ヨーロッパ認定代理店:
Shure Europe GmbH
ヨーロッパ、中東、アフリカ地区本部：
部門:EMEA承認
Wannenacker Str. 28
D-74078 Heilbronn, Germany
Phone: +49 7131 72 14 0
Fax: +49 7131 72 14 14
Eメール：[email protected]
Patent Notice: Patent Des. 451,902
www.shure.com
©2010 Shure Incorporated
Europe, Middle East, Africa:
Shure Europe GmbH
Wannenäckestr. 28,
74078 Heilbronn, Germany
Phone: 49-7131-72140
Fax: 49-7131-721414
Email: [email protected]
Asia, Pacific:
Shure Asia Limited
22/F, 625 King’s Road
North Point, Island East
Hong Kong
Phone: 852-2893-4290
Fax: 852-2893-4055
Email: [email protected]
United States, Canada, Latin
America, Caribbean:
Shure Incorporated
5800 West Touhy Avenue
Niles, IL 60714-4608 USA
Phone: 847-600-2000
Fax: 847-600-1212 (USA)
Fax: 847-600-6446
Email: [email protected]
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15

Shure 54 User manual

54
Shure
Brand
Shure
Model
54
Category
Microphones
Type
User manual
This manual is also suitable for

The Shure WBH54T is a wireless headworn microphone system that provides reliable and clear audio reproduction for vocal performances. Its supercardioid polar pattern reduces background noise and feedback, making it ideal for loud stage environments. With a lightweight and adjustable headband, the WBH54T offers a comfortable and secure fit during extended use. The included snap-fit foam windscreens minimize breath and wind noise, ensuring pristine audio quality.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents