Shure R90 User manual

Category
Security device components
Type
User manual

Shure R90 is a replacement cartridge for the Model 562 microphone. It is a high-quality cartridge that will provide excellent sound quality for your microphone. The cartridge is easy to install and comes with all the necessary hardware. The exploded view you see in Figure 1 shows you all the numbered components.

Shure R90 is a replacement cartridge for the Model 562 microphone. It is a high-quality cartridge that will provide excellent sound quality for your microphone. The cartridge is easy to install and comes with all the necessary hardware. The exploded view you see in Figure 1 shows you all the numbered components.

MODEL R90 REPLACEMENT CARTRIDGE FOR MODEL 562 MICROPHONE
562
GRILLE CAP
FRONT
SCREEN
FRONT PAD
RUBBER
WASHERS
CARTRIDGE
SIDE SCREEN
SIDE
PAD
CASE
HEX
SET SCREW
STRAIN
RELIEF
TAPE
FIGURE 1
EXPLODED VIEW
To replace the cartridge, proceed as follows:
1. Insert a No. 4 (.050 in.) hex wrench
into set screws in case (see Figure 1),
and turn clockwise (inward)
just
enough
to loosen the grille-cap. Be
careful not to turn the screws all the
way into the case.
2. Remove the grille-cap, front screen,
front pad, and the two rubber washers.
3. Carefully withdraw the cartridge from
the case, and remove the side screen,
and the side pad, exposing soldered
and taped connections.
4. Remove tape from soldered connec-
tions
on the bottom
(not the side) of the
old cartridge and retain for use on the
new cartridge. If tape is missing or
damaged, any suitable electrical tape
may be used for step 7.
5. Carefully unsolder the three leads at-
tached to the old cartridge.
6. Carefully solder the three leads to the
new cartridge (see Figure 2).
7. Place tape over the black and white
lead solder connections of the new
cartridge.
8. Wrap the side pad and side screen
around new cartridge.
9. Insert new cartridge in case; twisting
cartridge slightly to avoid pinching
leads between cartridge and case.
10. Replace the rubber washers, front pad
and front screen, and slip grille into
place. Align holes in the grille with set-
screws in the case.
11. Insert hex wrench in set screws and
turn counterclockwise (outward) to
lock grille, being careful not to turn the
screws all the way out of the case.
BLUE
WHITE
BLACK
+
FIGURE 2
INTERNAL CONNECTIONS
Model R90 Cartridge for Model 562
27D1158 (Rev. 6)
2005, Shure Incorporated
Printed in U.S.A.
SHURE Incorporated http://www.shure.com
United States, Canada, Latin America, Caribbean:
58
00 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone
: 847-600-2000 U.S. Fax: 847-600-1212 Int’l Fax: 847-600-6446
Eur
ope, Middle East, Africa:
Shu
re Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414
Asia, Pacific:
Shu
re Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055
  • Page 1 1

Shure R90 User manual

Category
Security device components
Type
User manual

Shure R90 is a replacement cartridge for the Model 562 microphone. It is a high-quality cartridge that will provide excellent sound quality for your microphone. The cartridge is easy to install and comes with all the necessary hardware. The exploded view you see in Figure 1 shows you all the numbered components.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents