Barco 4MP/6MP User manual

User Guide

Coronis Fusion 4MP/6MP

(This page intentionally left blank.)

2 Coronis Fusion 4MP/6MP

Coronis Fusion 4MP/6MP 3

Welcome!

Thank you for choosing this CORONIS FUSION 4MP/6MP display!

Coronis Fusion is an ingenious PACS display system designed to further

enhance flexibility and productivity in diagnostic imaging.

Featuring the industry’s first 30-inch color LCD that can be used as two

seamless heads or one wide-screen display, Coronis Fusion offers you

the freedom to organize your workspace just the way you want it. It

allows you to read CT, MR, cath and echo cardiogram images, or any

other combination, side by side on a single diagnostic screen.

Coronis Fusion features the latest, breakthrough In-Plane Switching (IPS-

Pro) LCD technology. This technology brings the most advanced LCD

viewing characteristics on the market, setting new standards for

brightness and contrast, even from a wide viewing angle.

Use the instructions in this guide to install your C

ORONIS FUSION 4MP/6MP

display and discover all these interesting features yourself!

Following symbols may be used throughout this guide:

Warning: Risk of

injury to human

beings

Caution: Risk of

damage to the

product

Important notice

or remark

Note

Hint, tip Additional

information

Read all the safety information starting on page 51 before

operating your C

ORONIS FUSION 4MP/6MP display.

WARNING

(This page intentionally left blank.)

4 Coronis Fusion 4MP/6MP

Coronis Fusion 4MP/6MP 5

Table of contents

What's in the box.............................................................6

Parts, controls and connectors ........................................7

Front view ............................................................................................... 7

Rear view ................................................................................................ 8

Display installation........................................................11

Removing the covers ........................................................................... 11

Unlocking the height mechanism....................................................... 13

Adjusting the display position ............................................................. 14

Connecting the signal cables...............................................................15

Connecting the power cables.............................................................. 16

Routing the cables................................................................................ 16

Re-attaching the covers .......................................................................17

VESA-mount installation.......................................................................18

First time starting up............................................................................ 20

Daily operation ..............................................................21

Recommendations for daily operation ............................................... 21

Stand-by switching............................................................................... 23

Bringing up the OSD menu.................................................................. 23

Navigating through the OSD menus................................................... 24

Making selections in the OSD menus.................................................25

Changing values in the OSD menus ...................................................25

Advanced operation ......................................................26

Info messages.......................................................................................26

On-screen display (OSD)...................................................................... 28

Luminance and color menu ......................................................... 28

Display Function menu................................................................. 30

Settings menu ...............................................................................35

6 Coronis Fusion 4MP/6MP

Information menu.........................................................................37

Changing the viewing mode............................................................... 38

Enabling/disabling User Controls........................................................ 38

Switching Power LED on/off ............................................................... 40

Switching DPMS on/off........................................................................ 40

Changing Display Functions................................................................. 41

Concepts.........................................................................................41

Display function selection ............................................................42

ALC & DICOM Options....................................................................43

Cleaning your display ....................................................48

Front glass .............................................................................................48

Cabinet................................................................................................... 49

Important information ..................................................50

Safety information................................................................................ 50

Environmental information.................................................................. 53

Regulatory compliance information.................................................... 56

Explanation of symbols........................................................................ 57

Legal disclaimer.................................................................................... 59

Technical specifications........................................................................ 60

Warranty statement..............................................................................66

Coronis Fusion 4MP/6MP 7

What's in the box

Your CORONIS FUSION 4MP/6MP display comes with:

• this C

ORONIS FUSION 4MP/6MP display guide

• a system CD

• two DVI cables

• a USB cable

• a set of AC power cords

• an external power supply

If you ordered a Barco display controller, it’s also in the box together

with its accessories. A dedicated user guide is available on the system

CD.

Keep your original packaging. It is designed for this display and

is the ideal protection during transport.

8 Coronis Fusion 4MP/6MP

Parts, controls and connectors

Front view

USB downstream connectors Left/Down key

Right/Up key Enter key

Stand-by key Ambient light sensor

Power status indicator light Control wheel

1 82 3 4 5 76

1 2

3 4

5 6

7

8

Coronis Fusion 4MP/6MP 9

Rear view

Connector compartment

cover

Neck cover

Display stand cover

1 32

1 2

3

10 Coronis Fusion 4MP/6MP

CORONIS FUSION 4MP

+24 VDC power input USB upstream connector

USB downstream connector +5 VDC, 0.25 A power output

for accessories

+3.3 VDC, 0.25A auxiliary

power output

DVI 1 video input

DVI 2 video input

6

1

2

3

4

5

7

1 2

3 4

5 6

7

Coronis Fusion 4MP/6MP 11

CORONIS FUSION 6MP

+24 VDC power input USB upstream connector

USB downstream connector +5 VDC, 0.25 A power output

for accessories

+3.3 VDC, 0.25A auxiliary

power output

DVI 1 video input

DVI 2 video input

6

1

2

3

4

5

7

1 2

3 4

5 6

7

12 Coronis Fusion 4MP/6MP

Display installation

Removing the covers

CONNECTOR COMPARTMENT COVER

The connector compartment cover should be removed to get access to

the connectors. To remove the cover, proceed as follows:

1 Gently lift the clips at one of the handles of the connector

compartment cover to release that side of the cover.

2 Do the same at the other side of the cover.

3 Remove the cover.

Prior to installing your CORONIS FUSION 4MP/6MP display and

connecting all necessary cables, make sure to have a suitable

display controller physically installed in your computer. If you are

using a Barco display controller, please consult the dedicated user

guide available on the system CD.

Coronis Fusion 4MP/6MP 13

DISPLAY STAND COVER

To get access to the cable routing channel, the display stand cover

should be removed. This can be done as follows:

1 Gently press and hold the clips at the inside top of the cover.

2 Slide the cover upwards while holding the clips pressed.

14 Coronis Fusion 4MP/6MP

Unlocking the height mechanism

In the factory, the height-positioning system in the display stand is

locked with a red hook to prevent damage during transportation. You’ll

have to remove this hook before adjusting your display height position.

1 While holding the display panel pushed down, pull out the red

hook in the display stand.

To retain the hook for possible future transportation, insert the

short, red end of the hook back into the stand of your display.

Coronis Fusion 4MP/6MP 15

Adjusting the display position

Now that the height-positioning system of your display is unlocked, you

can tilt, swivel, raise and lower the display as desired.

Do not try to pivot your display when attached to the stand.

Trying to do so could cause serious damage to your display and

its stand.

16 Coronis Fusion 4MP/6MP

Connecting the signal cables

1 Connect one head of the display controller to the DVI 1 connector

with one of the supplied DVI cables.

2 Connect another head of the display controller to the DVI 2

connector with one of the supplied DVI cables.

3 If you want to make use of your display’s USB downstream

connectors, connect a PC USB downstream connector to the

display’s USB upstream connector by means of the supplied USB

2.0 cable.

Coronis Fusion 4MP/6MP 17

Connecting the power cables

1 Connect the supplied external DC power supply to the +24 VDC

power input of your C

ORONIS FUSION 4MP/6MP display.

2 Plug the other end of the external DC power supply into a

grounded power outlet by means of the proper power cord

delivered in the packaging.

Routing the cables

Route all connected cables trough the cable routing channel in the stand

of your display.

The cable straps at the inside of the connector compartment

allow you to fix the cables for better shielding of the cables.

18 Coronis Fusion 4MP/6MP

Re-attaching the covers

1 Re-attach the display stand cover by sliding it downward. You’ll

hear a “click” sound of the cover’s clips when the display stand

cover is in position.

2 Re-attach the connector compartment cover by sliding the cover’s

top in position and then push the cover’s bottom. You’ll hear a

“click” sound of the cover’s clips when the connector compartment

cover is in position.

Pay attention that all cables stay in the cable channel

while replacing the cover.

Coronis Fusion 4MP/6MP 19

VESA-mount installation

The panel, standard attached to a stand, is compatible with the VESA

100 mm standard. Thus, it can be used with an arm that is approved by

VESA. This chapter shows you how to release the panel from the stand

and how to attach it to an arm. If you’re not using an arm, you can skip

this chapter.

1 Gently pull open both lower sides of the cover.

2 Slide the cover upwards while holding the lower sides pulled open.

20 Coronis Fusion 4MP/6MP

3 Lift the plastic frame that covers the fixation of the panel to the

stand. Turn it for 45 degrees to uncover the fixation screws.

4 Unscrew the four fixation screws fixing the panel to the stand.

5 Attach the panel firmly to the arm using 4 screws M4 x 10 mm.

You should mount the panel in landscape position.

Portrait position is possible but not supported.

Use an arm that can support a weight of at least 21.6 kg

(47.62 lbs). Failure to do so could make the panel fall,

causing serious injury to a child or adult, and serious

damage to the equipment.

Page is loading ...

Barco 4MP/6MP User manual

This manual is also suitable for

Barco 4MP/6MP User manual

Related papers

Other documents