2. Computers & electronics
  3. TVs & monitors
  4. Public displays
  5. AUO
  6. OFH55C
OFH55C

AUO OFH55C User guide

  • Hello! I am an AI chatbot trained to assist you with the AUO OFH55C User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Quick Start Guide
Safety Instruction
OFH55C (SH55FNN01.2)
Please carefully read through and keep the following instructions for
future reference before using the display.
•Please follow the display’s user manual’s instructions.
•Make sure to check that the local power supply complies with the display’s power
requirements
•Do not block the ventilation holes on the display and ensure there is enough space around
the display to allow for heat dissipation.
•Our company’s software products are copyrighted. Do not copy without authorization.
•Overexposure to direct sunlight can cause damage over time and a strong reflection will
disturb the user’s experience when viewing content on the display.
•Do not install near any heat source, such as radiators, heaters, stoves or any other products
that may generate heat.
•Do not install the display on platforms or carts that are unstable, slanted or shaky. It may
cause the display to fall, injuring people around it and damaging the display itself. We suggest
consulting with professionals in the securing of the display.
•The display may fall, causing serious personal injury or death. To prevent injury, this display
must be securely attached to the floor/wall in accordance with the installation instructions.
•Always comply with all warnings and instructions labels on the display.
•Do not install the display in a confined environment.
•If you want to mount the display, please consult the professionals/manufacturers for
installation advice. Holes are provided on the display, which are specified in the following
user manual, which can be used to help design mounts for the display.
•Avoid excessive pressure or temperature changes as special liquid-crystal material in the
display may result in cracks, scratches or damage.
•When the display’s power is on, do not cover or block any of the display’s ventilation pores.
•It is suggested to periodically clean the display’s ventilation pores to ensure heat dissipation.
•Keep candles or other flammable items away from the display to avoid risks of fire.
•Do not stick your finger or other objects between the display and its mounting equipment (if
there are any) in order to avoid harming yourself or damaging the display.
•Do not press upon the display with too great a force so as to avoid damaging the product.
•ONLY USE accessories specified by the manufacturer.
•Never attempt to repair or open the display by yourself. Opening and removing the covers
may expose you to dangerous voltage or other hazards. Failure to follow this WARNING may
result in death or serious injury. Please contact your dealer or a service technician for
assistance.
•Hold the display by the sides firmly with two people when carrying the display out of the box.
•The power cord should be connected to a socket outlet with an earthing connection.
•Only skilled person can replace the fuse of appliance inlet..
Display Accessory Content
Version_20220506
Model OFH55C (SH55FNN01.2)
Panel
LCD Size 55 inch
Light Source D-LED
Active Area (H x V) 1209.60 x 680.40 mm
Resolution FHD 1920 x 1080 (pixels)
Aspect Ratio 16:9
Brightness (typ.) 2500 cd/m2
Color Temperature 6500K
Contrast Ratio (typ.) 4000:1
Response Time 8 ms (G to G)
Frame Rate 60 Hz
Viewing Angle (U/D/L/R) 89/ 89/ 89/ 89 degree
Light Life (min.) 50,000 hrs
Panel Surface
Circular polarizer(QWP), Anti-
Glare
low reflection, Haze 2.5%, Reflectance
≤ 2%
Power Rating AC 100-240V, 50-60Hz, 2.6A
Power Consumption 236 W
Display
I/O (Input)
DP x1, HDMI x2, D
-
SUBx1, Audio x1
I/O (Output) Audio x 1
I/O (Control)
RS232 (in)x1; RS232 (out) x1;
IR
x1 (for IR & Ambient light sensor
use)
SDM Slot N/A
Speaker N/A
Dimension (Lx W x D) 1235.60 x 706.40 x 107.98 mm
Weight (Net) 23.5kg (TBD)
Wall Mounting (mm) (VESA) 600 x 400
Border width (U/D/R/L) 9.8/9.8/9.8/9.8
OSD Control Remote controller
OSD Language
English / French (
Français
) / German
(Deutsch) / Spanish (Español) /
Traditional Chinese (繁體中文) /
Simplified Chinese (简体中文) /
Japanese (日本語)
Environment
Operation Temperature -10 ~ 50°C
Storage Temperature -20°C ~ 60°C
Storage Humidity 10% ~ 80% RH
Operating Humidity 10% ~ 80% RH
Display Orientation Portrait / Landscape
Usage 24 / 7 (hrs/days)
Specification
Note: One box includes 3 displays.
Mounting the Display Controlling the Display
Safety Information
Carrying the Display
When carrying the display, always
hold securely with two people using
both hands and the screen facing
forward.
CAUTION: Avoid applying force or using sharp
objects on the screen or the frame around the
screen at all times.
PRÉCAUTION : Évitez d'appliquer une force ou
d'utiliser des objets pointus sur l'écran ou le cadre
autour de l'écran en tout temps.
注意：避免在屏幕或屏幕周圍的框架上施力或使
用尖銳物體。
Placing the Display
When placing the display, keep the
display upright. Never tilt the
display towards the left, right or
balanced on a single corner of the
frame.
Setting Down the Display
When setting the display down, place the screen face
down on a flat and stable surface covered by a
protective sheet and a table cushion.
CAUTION: Never press or place anything on the
display panels. This may damage the internal parts
of the display.
PRÉCAUTION : N'appuyez ou ne placez jamais quoi
que ce soit sur les panneaux d'affichage. Cela
pourrait endommager les parties internes de
l'écran.
注意：切勿在顯示面板上按壓或放置任何東西。
這可能會損壞顯示器的內部部件。
Adjusting the Direction
The back of the
display is equipped
with four screw-holes
with VESA dimensions
of 600 x 400mm.
Horizontal (Landscape)
Vertical (Portrait)
Wall Mount Specification
If you want to use the display
vertically or horizontally,
adjust the display such that the
main power switch on the
back of the display is pointing
rightward or downward and
the respective arrow on the
rear of the display is pointing
upward. If the display is not
mounted in such a way the
display may not function
properly.
Remote Control
Firmly secure a VESA mount onto the display using
four M6 screws (maximum length: 16 mm, maximum
torque: 18 kgf-cm).
限用物質含有情況標示聲明書
Declaration of the Presence Condition of the
Restricted Substances Marking
Inputs/Outputs OSD Overview
Item
Default
Description
Luminance
Brightness
0
-100
100
Adjusts the brightness of the display
Contrast
0
-100
50
Adjusts the contrast of the display
Anti
-Burn-in
Off
Off
Triggers the screen saver function (Off/On). This
process will then be activated each time the display
is powered on.
On
Auto
Dimming
Off
On
When this function is enabled, the light sensor will
be activated and the display’s brightness will be
adjusted automatically based on ambient light
(Off/On).
On
Picture
Phase
0
-100
30
Adjusts the frequency phase of the display
Clock
0
-100
50
Adjusts the pixel clock (or dot clock) setting of the
display
H. Position
0
-100
50
Adjusts the picture along the horizontal axis
V. Position
0
-100
50
Adjusts the picture along the vertical axis
Color
Color
Temperature
6500K
6500K
Adjusts the color temperature of the display
9300K
11500K
sRGB
User Define
Red
0
-100
70
Adjusts the red value of the display (0~100)
(Only available for User Define mode)
Green
0
-100
70
Adjusts the green value of the display (0~100)
(Only available for User Define mode)
Blue
0
-100
70
Adjusts the blue value of the display (0~100)
(Only available for User Define mode)
OSD
Settings
Horizontal
0
-100
50
Adjusts the position of the OSD menu horizontally
Vertical
0
-100
50
Adjusts the position of the OSD menu vertically
OSD
Time Out
5
-60
15
Changes the OSD menu timer settings (5 ~60)
where the number selected for this setting equals
the number of seconds the OSD menu is displayed
before it automatically closes.
OSD Rotation
0
-3
0
Rotates the OSD menu
Setup
Language
English
English
Chooses the OSD Menu language
French
German
Item
Description
Setup
Language
English
Chooses the OSD Menu language
French
German
Español
繁體中文
简体中文
日本語
Input
D
-SUB
Selects the signal input for the display
HDMI1
HDMI2
DP
Display Size
Full Screen
Adjusts the aspect ratio of the display
Auto
4:3
Reset
Yes
Resets the display to its factory default settings
No
Power Saving
Off
Configures the display so that it will
automatically turn off when no signal is
detected (Off / On)
On
Monitor ID
1
-100
Sets a unique ID number for the display
Information
FW Version
Displays the display information
Thermal
℃
Resolution
OSD Overview
Container
Type
40’DC / 40’HQ 20’DC
Loading
Capacity
192pcs/40’DC & 40’HQ
(Double Pallet)
96pcs / 20’DC
(Double Pallet)
Pallet No. /
Size
T55 / 1390*1150*138mm
Display
Quantity of
One Box
3 pxs/Box
Carton
Quantity of
One Layer
2 cartons ( 2* 1 )
Double
Pallet
Total Pallet : 32 pallets Total Pallet : 16 pallets
( L：8 pallet * W：2 pallet* H：2 pallet) ( L：4 pallet * W：2 pallet* H：2 pallet)
Loading Information
Declaration of Conformity
FCC Declaration of Conformity
47 CFR §2.1077 Compliance Information
Name of Responsible Party:
AU Optronics Corp. America
Address of Responsible Party:
37085 Grand River Ave.
Farmington, MI 48335
U. S. A.
Contact Person:
Company Representative
Phone No.:
+1 408-518-8800
Fax No.:
+1 408-518-8123
FCC Compliance Statement
This device complies with Part 15 of FCC Rules. Operation
is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
FCC Information
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
You are cautioned that changes or modifications not
expressly approved by the party responsible for compliance
could void your authority to operate the equipment.
Please use the supplied power adapter and power cord to
ensure the FCC compliance. If a power cord is not provided,
please contact your supplier.
符合性聲明
FCC 符合性聲明
47 CFR §2.1077 合規信息
責任方名稱：友達光電美國公司
責任方地址：37085 Grand River Ave., Farmington, MI
48335
聯繫人：公司代表
電話號碼：+1 408-518-8800
傳真號碼：+1 408-518-8123
FCC 合規聲明
本設備符合 FCC 規則的第 15 部分。操作須符合以下兩項
條件：(1) 本設備不會造成有害干擾，並且 (2) 本設備必須接
受接收到的任何干擾，包括可能導致意外操作的干擾。
FCC 信息
根據 FCC 規則第 15 部分，本設備已經過測試並符合
A 類數字設備的限制。當設備在商業環境中運行時，
這些限制旨在提供合理的保護，防止有害干擾。本設
備會產生、使用和輻射射頻能量，如果未按照說明手
冊安裝和使用，可能會對無線電通信造成有害干擾。
在住宅區使用本設備可能會造成有害干擾，在這種情
況下，用戶需要自費排除干擾。
請注意，未經合規責任方明確批准的更改或修改可能
會使您操作設備的權限失效。
請使用隨附的電源適配器和電源線以確保符合FCC 標
準。如果未提供電源線，請聯繫您的供應商。
安全說明
在使用顯示器之前，請仔細閱讀並保留以下說明以供將來參考。
•請按照顯示器用戶手冊的說明進行操作。
•確保檢查本地電源是否符合顯示器的電源要求
•請勿堵塞顯示屏上的通風孔，並確保顯示屏周圍有足夠的空間以散熱。
•我公司的軟件產品受版權保護。未經授權請勿複制。
•過度暴露在直射陽光下會隨著時間的推移而造成損壞，
且強烈的反射會影響用戶在查看顯示屏上的內容時的體驗。
•請勿安裝在任何熱源附近，例如散熱器、加熱器、火爐或任何其他可能產生熱量的產品。
•請勿將顯示器安裝在不穩定、傾斜或搖晃的平台或推車上。
它可能會導致顯示器掉落，傷害周圍的人並損壞顯示器本身。
我們建議諮詢專業人員以確保顯示器的安全。
•顯示器可能會掉落，從而導致嚴重的人身傷害或死亡。
為防止受傷，該顯示器必須按照安裝說明牢固地固定在地板/牆壁上。
•始終遵守顯示屏上的所有警告和說明標籤。
•請勿將顯示器安裝在密閉環境中。
•如果您想安裝顯示器，請諮詢專業人士/製造商以獲取安裝建議。
顯示器上提供了孔，這些孔在以下用戶手冊中指定，可用於幫助設計顯示器的支架。
•避免過度的壓力或溫度變化，
因為顯示器中的特殊液晶材料可能會導致裂縫、划痕或損壞。
•顯示器通電時，請勿遮蓋或堵塞顯示器的任何通風孔。
•建議定期清潔顯示器的通風孔，以保證散熱。
•讓蠟燭或其他易燃物品遠離顯示器，以免發生火災。
•請勿將手指或其他物體放在顯示器及其安裝設備（如果有）之間，
以免傷害自己或損壞顯示器。
•請勿用力按壓顯示屏，以免損壞產品。
•只能使用製造商指定的附件。
•切勿嘗試自行修理或打開顯示器。打開和取下蓋子可能會使您面臨危險電壓或其他危險。
不遵守此警告可能會導致死亡或重傷。請聯繫您的經銷商或服務技術人員尋求幫助。
•將顯示器從包裝箱中取出時，請兩個人用力握住顯示器的兩側。
•電源線應連接到帶有接地連接的插座。
•只有技術人員才能更換電器插座的保險絲。
/