Pergo LF000892 User manual

Brand: Pergo

Model: LF000892

Type: User manual

031221_TIM_PER W WETPROTECT

Pergo TimberCraft

+ WetProtect

ﬂoors, like other ﬁne furnishings in your home, require proper care to keep them

looking their best. When you follow our easy cleaning and maintenance instructions, you'll ﬁnd taking care of your

Pergo TimberCraft + WetProtect ﬂoor a snap!

Regular Maintenance

The surface layer of Pergo TimberCraft + WetProtect ﬂooring is hard and compact, so dirt and dust do not adhere to it

easily. The following simple steps are usually all it takes to keep your ﬂoor clean.

For general cleaning, use a dust mop or vacuum with the correct hard surface attachment of your vacuum cleaner.

For heavier cleaning, occasionally wet mop with water only, using a well wrung out mop.

DO NOT pour liquid directly on ﬂoor or use an excessively wet mop that will puddle or leave moisture standing on the

ﬂoor. Occasional wet mopping is permitted for Pergo TimberCraft + WetProtect only.

If needed, use a solution of 1 cup of vinegar per gallon of water OR 1/3 cup non-sudsing ammonia per gallon of water.

DO NOT use detergents, abrasive cleaners, soaps, waxes or polishes. A residential steam mop may be used provided

the steam is applied to a microﬁber pad and not applied directly to the ﬂoor. Make sure to set the temperature of the

steam mop to the appropriate setting for laminate ﬂoors, or to the lowest setting. Steam mop in the length direction

of the planks only. There is never a need to wax or reﬁnish your Pergo TimberCraft + WetProtect ﬂoor.

DO NOT use rotating beater bars, ﬂoor scrubbers, jet mops, buffers or similar products.

Protect the Floor

While Pergo TimberCraft + WetProtect is remarkably durable, there is of course no such thing as an indestructible

ﬂooring material. There are a few simple protective measures that are important to keep your ﬂoor looking new.

To protect your Pergo TimberCraft + WetProtect ﬂoor from surface scratches, place walk-off area rugs or mats inside

any exterior doorway to collect small bits of gravel that may track in on shoes.

Use felt ﬂoor protectors on the legs of chairs, sofas, TV stands, tables and other easily movable furniture.

Replace plastic or metal casters on chairs with rubber wheels and lift rather than slide heavy objects across the ﬂoor.

Minor damage to a Pergo TimberCraft + WetProtect™ plank can be easily repaired with color matched ﬁnishing

putty, such as Pergo Floor Restore™. If the damaged area is larger than 1/4 of an inch, we recommend contacting a

professional to replace an entire plank.

Spot Removal

Pergo TimberCraft + WetProtect stain resistance means peace of mind for you and easy clean up. So, when the

inevitable happens, use the following guide for stain and spot removal:

For chocolate, grease, juice, cordials and wine — use lukewarm water and a non-abrasive cleaner (such as, ammonia

and water).

For tar, markers, crayon, lipstick, oil, shoe polish, ink, nail polish and cigarette burns — use acetone/nail polish remover

or denatured alcohol.

Note: Do not use acetone on wallbase or quarter round.

For candle wax and chewing gum — let harden and scrape carefully with a blunt plastic scraper.

PERGO TimberCraft

+ WetProtect

Laminate Floors Care and Repair

TimberCraft

Pergo LF000892 User manual

Pergo LF000892 User manual

Pergo LF000892 User manual

Related papers

Other documents