2. Rugged Ridge
  3. 11586.08

Rugged Ridge 11586.08, 11586.03 Installation guide

  • Hello! I've reviewed the Rugged Ridge installation instructions for the Jack Mount Bracket models 11586.03 and 11586.08. This document details the steps for mounting the bracket to a Spartacus Tire Carrier and securing an Off Road Jack. I'm ready to answer any questions you have about the installation process or the bracket's features.
  • What should be removed before installing the Jack Mount Bracket?
    How do you align the Jack Mount Bracket?
    How is the Off Road Jack secured in the mounting bracket?
Copyright © 2016 Omix-Ada®, Inc.
460 HORIZON DR. SUITE 100 | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 770-614-6069 | [email protected]
JK Off-Road Jack Mount Bracket (with Spartacus Tire Carrier)
Page 1/1
Part #11586.03
11586.08
OMIX-ADA® TECHNICAL SUPPORT
PHONE: M-F 8am - 5pm EST 1-800-449-6649 | EMAIL: [email protected]
FOR WARRANTY INFORMATION VISIT: www.Omix-Ada.com
2. Align top top mounting points on Jack Mount
Bracket with mounting holes in Tire Carrier. Secure
with provided M10 hardware and spacers.
1. Remove two bolts closest to Spartacus Tire Carrier
Hinge.
3. To install Off Road Jack, use bottom knob to clamp
base of jack into position ensuring rear of base is under
tab in mounting bracket. Close top swing arm making
sure rubber pads grip jack’s vertical beam.
/