2. Rugged Ridge
  3. Manual Transmission Shift Knob Billet Aluminum

Rugged Ridge Manual Transmission Shift Knob Billet Aluminum Installation guide

  • Hello, I've reviewed the user manual for the Rugged Ridge Shift Knob TJ-JK Billet Aluminum 6 Speed. This manual provides instructions on how to remove the old shifter knob and install the new one using a 4mm hex key. I'm ready to answer any questions you may have about the installation process or the product itself.
  • How do I remove the old shifter knob?
    How do I secure the new shifter knob?
    What should I check after installation?
Rev. 8/11 Page 1 of 1 SB
Brushed 11421.02
Black 11422.02
TJ-JK Billet Aluminum 6 Speed Shift Knob 05-10
Step 1. Remove the shifter knob. Pull it up and o by rmly pulling
it back and forth until the shifter knob slides o.
Step 2. Slide on your Rugged Ridge Manual Shifter and fasten it in
using a 4mm hex key.
Step 3. Check and assure your manual shifter is rmly secured.
Contents: Manual Shifter Knob (1)
For Technical Assistance Contact:
Omix-Ada Tech Support
Phone: 1-800-449-6649
Email: [email protected]
Web: www.Omix-Ada.com
Copyright Omix-Ada 2011
PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE YOU BEGIN
/