Casio CX-E1, CX-F1UPD User manual

1

PROJECTOR

CX-E1

CX-F1*

*Network Model

BATTERY (Option)

YA-B10

User’s Guide

Be sure to read the “Safety Precautions” and “Operating Precautions” and make sure you use this

product correctly.

Keep this manual in a safe place for future reference.

Visit the site below for the latest version of this manual.

https://world.casio.com/manual/projector/

EN

2

DLP is a registered trademark of Texas Instruments of the United States.

Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the

United States and other countries.

HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing Administrator, Inc.

Other company and product names may be registered trademarks or trademarks of their

respective owners.

Portions of this product are based in part on the work of the Independent JPEG Group.

The contents of this User’s Guide are subject to change without notice.

Copying of this manual, either in part or its entirety is forbidden. You are allowed to use this

manual for your own personal use. Any other use is forbidden without the permission of CASIO

COMPUTER CO., LTD.

CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims from third

parties arising out of the use of this product or this manual.

CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of

data due to malfunction or maintenance of this product, or any other reason.

The sample screens shown in this manual are for illustrative purposes only, and may not be

exactly the same as the screens actually produced by the product.

3

Contents

Titles with N indicate information that applies to the network model only.

Safety Precautions.......................................................... 6

Operating Precautions.................................................. 16

About the Light Source Unit.................................................................16

Do not block light output or look directly into the lens! .......................16

Laser Precautions (See the label on the projector) ..............................17

AC Adapter Precautions.......................................................................18

Battery (Optional YA-B10) Precautions................................................19

Charging Precautions .............................................................................................. 19

Precautions When Using a Battery........................................................................... 19

Precautions During Battery Storage ......................................................................... 19

Handling rechargeable batteries (Please recycle!)..................................................... 20

Soft Inner Case (Optional YB-3) Precautions.......................................20

Other Precautions ................................................................................20

Precautions when Handling the Projector after Use ............................23

Getting Ready................................................................ 24

Unpacking ............................................................................................24

Operation Flow to Projection................................................................24

General Guide ......................................................................................26

Key and Indicator Panel .......................................................................27

Preparing a Power Source ...................................................................28

Using the AC Adapter to Power the Projector........................................................... 28

Using a Battery to Power the Projector ..................................................................... 29

Turning the Projector On ......................................................................34

Turning the Projector Off......................................................................35

Placing the Projector on a Desk or on the Floor ..................................36

Adjusting the Vertical Angle of the Projector ............................................................. 37

Setup Precautions ..................................................................................................... 38

4

Connecting with Another Device..........................................................39

HDMI Cable Connection............................................................................................ 39

Wireless LAN Connection N.................................................................................... 40

Outputting Audio from the Projector to Another Device N...................................... 40

LOGO Terminal (Firmware Updates, User Logo Transfers) ....................................... 41

Optionally Available Remote Controller................................................42

Operating the Projector................................................ 43

Auto Input Source Switching N..........................................................43

Frequent Functions Menu ....................................................................45

Power Source Connection Status and Battery Level ................................................ 45

Correcting Vertical and Horizontal Keystoning Manually .......................................... 47

Adjusting Projection Brightness (Light Control)......................................................... 48

Adjusting the Volume Level N.................................................................................. 49

Changing the Input Source N.................................................................................. 50

Using the Setup Menu..........................................................................50

Displaying the Setup Menu........................................................................................ 50

Operations Using the Setup Menu ............................................................................ 51

Changing the Aspect Ratio of the Projected Image .................................................. 51

Changing the Color Mode........................................................................................ 52

Flipping the Projected Image Horizontally (Mirror Mode)........................................... 53

Projecting the Test Pattern ...................................................................................... 54

Control Panel Lock .................................................................................................. 55

Setup Menu Settings ................................................................................................. 56

Functions that Can be Controlled with the Optional Remote

Controller..............................................................................................61

Using Auto Projection Off.....................................................................62

Enabling and Disabling Auto Projection Off............................................................... 63

Auto Projection Off Projection Light Control ............................................................. 63

Using the Presentation Timer...............................................................64

To display the timer function menu .......................................................................... 64

To display the timer (Remote controller operation only) ............................................ 64

To configure timer settings....................................................................................... 65

Timer Operations ..................................................................................................... 65

Using a Password ................................................................................66

Configuring Password Settings ................................................................................ 66

Using the Password Feature.................................................................................... 67

If you forget your password... .................................................................................. 67

5

Cleaning the Projector.................................................. 68

Cleaning the Projector Exterior ............................................................68

Cleaning the Lens.................................................................................68

Cleaning Vents .....................................................................................68

Troubleshooting ............................................................ 69

Normal Operation Indicators ................................................................69

Error Indicators and Messages ............................................................70

Error Messages ....................................................................................................... 70

Indicator Status When an Error Occurs.................................................................... 71

Projector Troubleshooting....................................................................72

Checking the Serial Number and Board Number.................................74

Appendix ........................................................................ 75

Hanging the Projector from a Ceiling ...................................................75

Projection Distance and Screen Size ...................................................76

Aspect Ratio Setting and Projection Image .........................................77

Supported Signals................................................................................78

Specifications................................................................ 79

Projector Specifications .......................................................................79

Battery Specifications (Optional YA-B10) ............................................81

Soft Inner Case Specifications (Optional YB-3) ...................................81

6

Safety Precautions

Thank you for selecting this CASIO product. Be sure to read these “Safety Precautions” before trying

to use it. After reading this User’s Guide, keep it in a safe place for future reference.

About safety symbols

Various symbols are used in this User’s Guide and on the product itself to ensure safe use, and to

protect you and others against the risk of injury and against material damage. The meaning of each of

the symbols is explained below.

Icon Examples

*Danger Indicates something that creates a major risk of death or serious personal

injury.

*Warning Indicates something that creates a risk of death or serious personal injury.

*Caution Indicates something that creates a risk of minor personal injury or physical

damage.

!A circle with a line through it indicates information about an action that you should not

perform. The specific action is indicated by the figure inside the circle. The example shown

here means disassembly is prohibited.

’A triangle indicates a situation against which you need to exercise caution. The example

shown here indicates you should take precaution against electric shock.

$A black circle indicates information about an action that you must perform. The specific

action is indicated by the figure inside the circle. The example shown here indicates you must

unplug the power cord from the power outlet.

7

Battery (Optional YA-B10)

Charge a battery only as specifically

directed.

Charging a battery using a method

other than that specifically mentioned in

this user’s guide creates the risk of

overheating, fire, and explosion.

Do not allow a battery to become wet

with water, seawater, or other liquids.

Moisture creates the risk of battery

damage, and lessening of battery

performance and battery life.

Never place a vase or any other

container of water on top of a battery.

Moisture from the container can get on

a battery and create the risk of battery

damage, and lessening of battery

performance and battery life.

Do not use a battery to power any

other device besides this product.

Use batteries to power a CX-E1 or

CX-F1 projector only. Using a battery to

power any other type of device creates

the risk of battery damage, and

lessening of battery performance and

battery life.

Do not touch a battery with wet hands.

Doing so creates the risk of electric

shock.

Be sure to observe the precautions

below when using a battery.

Failure to do so creates the risk of battery

overheating, fire, and explosion.

Should you ever notice any battery

abnormality, immediately stop using it.

Should you ever notice leaking fluid,

abnormal odor, heat generation,

discoloration, deformation, or external

damage while using, charging, or

storing a battery, immediately

disconnect it from the projector and/or

AC adapter and stop using it.

Precautions When Storing or Using a

Battery

Do not use, leave, or store a battery in a

location exposed to strong direct

sunlight, in a closed motor vehicle

parked outside, or in any other location

subject to high temperatures. Heat

creates the risk of battery overheating

and fire, and lessening of battery

performance and battery life.

Should fluid leaking from a battery

ever get onto your skin or clothing,

immediately rinse it off with clean

water.

Fluid in the eyes creates the risk of sight

loss, etc. After rinsing, immediately

contact a physician.

• Do not try to disassemble or modify a

battery.

• Do not use or leave a battery near fire

or open flame.

• Do not throw a battery into fire or

expose it to heat.

+

%

+

"

!

-

• Do not pack a battery together with

any conductive material (metal

necklaces, coins, etc.) for transport or

storage.

• Do not allow a battery to be pierced by

a needle or subjected to strong impact

(hammer blow, stepping, etc.)

• Do not place a battery into a

microwave oven, dryer, pressurized

container, etc.

-

+

-

+

Danger

*

B

8

Precautions During Use

Adult supervision is required

whenever there are young

children present and especially

when there is the possibility of

young children coming into

contact with the projector.

Remote Controller Battery

Precautions

Should fluid leaking from a battery get

on your skin or clothing, immediately

rinse it off with clean water.

Battery fluid getting into the eyes

creates the risk of eyesight loss, etc.

Rinse the eyes and then immediately

contact a physician.

AC adapter

Do not touch the AC adapter with wet

hands.

Doing so creates the risk of electric

shock.

Be sure to observe the precautions

below when using the AC adapter.

Misuse creates the risk of fire and electric

shock.

Do not use the AC adapter while it is

covered with a futon or blanket, or

located next to a heating device.

Heat dissipating from the AC adapter

can raise the temperature of its

surroundings and create the risk of fire.

Do not allow the AC adapter to

become wet with water, seawater, or

other liquids.

Liquid creates the risk of fire and

electric shock.

+

• Use only the specified AC adapter.

• Use the AC adapter with the specified

device only.

• Do not try to disassemble or modify the

AC adapter.

• Do not use or leave the AC adapter

near fire or open flame.

• Do not throw the AC adapter into fire or

expose it to heat.

• Do not put any heavy object on the AC

adapter.

• Do not try to modify the AC adapter,

allow it to become damaged, or

subject it to excessive bending.

• Do not subject the AC adapter

connector cord to twisting or pulling.

• Keep the AC adapter away from stoves

and other sources of heat.

• Locate the AC adapter connector cord

in a place where people will not trip

over it or kick it.

"

+

!

-

+

-

%

Warning

*

B

9

Warning

*

Do not place a vase or any other

container of liquid on top of the AC

adapter.

Liquid creates the risk of fire and

electric shock.

Do not touch the AC adapter during a

lightning storm.

Doing so creates the risk of electric

shock.

Before going out, unplug the AC

adapter from the wall outlet and put it

in a place away from animals and pets.

A pet chewing on the AC adapter

connector cord or power cord can

cause shorts, creating the risk of fire.

Abnormalities (Smoke, Odor, Heat

Generation, etc.)

Do not use the product if it is emitting

smoke, odor, heat, or exhibiting any

other abnormality. Do not use the

product after it has been dropped or

otherwise damaged.

Doing so creates the risk of fire and

electric shock. Immediately perform the

steps below.

Do not use the product if it is

malfunctioning.

Do not continue using the product if its

display is abnormal or if it is

malfunctioning.

Continued use creates the risk of fire

and electric shock. Immediately perform

the steps below.

Power Cord

Observe the precautions below in

order to avoid power cord fire and

electric shock.

1. Unplug the power plug from the power outlet

and disconnect the AC adapter (or battery)

from the projector.

2. Contact your original retailer or a CASIO

Service Center.

%

’

+

1. Turn off power.

2. Unplug the power plug from the power outlet

and disconnect the AC adapter (or battery)

from the projector.

3. Contact your original retailer or a CASIO

Service Center.

• Use only the included power cord.

• Be sure to plug the power cord into an

outlet with earth grounding.

• Should the power cord become

damaged, contact your original retailer

or a CASIO Service Center.

• Use the included power cord with this

product only.

• Do not plug the power cord into an

outlet with the wrong voltage rating.

• Do not plug into an overloaded

extension cord or power outlet.

• Do not share the outlet supplying

power to the product with other

devices.

If you are using an extension cord,

make sure that the ampere rating of the

extension cord is appropriate for this

product.

• Do not cover the power cord with a

blanket or other material during use,

and keep it away from heating devices.

-

+

-

B

10

Warning

*

Do not touch the plug with wet hands.

Doing so creates the risk of electric

shock.

Avoiding Water and Foreign Matter

Do not allow water, other liquids

(sports drinks, seawater, animal or pet

urine, etc.), or foreign objects (metal

fragments, etc.) to get into the

product. Should any such matter get

into the product, immediately perform

the steps below.

Continued use creates the risk of fire

and electric shock.

Do not locate a flower vase or other

liquid container on top of or next to the

product.

Liquid spilling from a container creates

the risk of fire and electric shock.

Disassembly and Modification

Do not attempt any disassembly or

modification.

For any internal inspection,

adjustment, or repair, contact your

original retailer or a CASIO Service

Center.

The product contains a large number of

high-voltage components that create

the risk of electric shock and burn

injury.

Suffocation and Choking Risks

Do not allow anyone to play with the

plastic bags used for product

packaging.

Plastic bags create the risk of

suffocation when placed over the head,

when swallowed, etc.

Particular care is required in areas

where young children are present.

Dropping and impact

Continued use of the projector after it

has been damaged by dropping or

other mistreatment creates the risk of

fire and electric shock. Immediately

perform the following steps.

Disposal by burning

Never try to dispose of the projector by

burning it. Doing so can cause an

explosion, which creates the risk of fire

and personal injury.

• Do not place heavy objects on the

power cord and do not leave it bundled

during use.

• Do not locate any objects in the vicinity

of the power plug and keep it easily

accessible so it can be unplugged in

case of an emergency.

• Do not subject a power cord to heat or

attempt to modify it, and avoid

damaging it.

• Do not subject the power cord to

excessive bending, twisting, or pulling.

• Make sure the power cord is not

pinched between the wall and the rack

or table where the product is located,

and never cover the power cord with a

cushion or other object.

1. Turn off power.

2. Unplug the power plug from the power outlet

and disconnect the AC adapter (or battery)

from the projector.

3. Contact your original retailer or a CASIO

Service Center.

-

"

+

-

1. Turn off the projector.

2. Unplug the power plug from the power outlet

and disconnect the AC adapter (or battery)

from the projector.

3. Contact your original dealer or authorized

CASIO service center.

!

-

11

Warning

*

Avoid Looking into the Light

Do not look directly into the lens, the

intake or exhaust vents while the light

is on.

The strong light emitted by the light

source creates the risk of eye damage.

Vent Blockage

Do not allow blocking of the intake or

exhaust vents.

Be sure to observe the precautions

below.

Blocked vents causes internal heat

buildup, which creates the risk of fire

and malfunction.

• Do not locate the projector where ventilation is

poor or in a sealed environment. Do not cover

the projector with cloth or any other material.

• Do not locate the projector where its intake

and/or exhaust vents are directly exposed to

air output from an air conditioner or other

HVAC device.

• Do not use the product while it is on a carpet,

blanket, towel, or other soft material, or on a

seat with soft covering. Use the product on a

hard, flat surface.

For details about the projector’s intake and

exhaust vents, visit the URL below.

https://support.casio.jp/

information.php?cid=007&pid=1419

Keep the Cabinet Closed

Do not try to open the projector

cabinet.

Doing so creates the risk of electric

shock.

Intake and Exhaust Vents

Do not touch the intake and exhaust

vents during projection, and do not

place any plastic or other objects or

material close to intake/exhaust vents.

Also, do not place the product on top

of such materials.

Doing so creates the risk of burn injury,

and deformation and discoloration of

the object or material.

Objects Blocking Projection

Make sure there are no objects that

can block the light in front of the lens

while projecting.

Such conditions create the risk of fire.

Aquarium, Other Water Tank

Make sure there is no aquarium or any

other type of water tank that can

produce a lens effect in front of the

lens while projecting.

Such conditions create the risk of fire.

Lens

Do not touch the lens with your hand.

Doing so creates the risk of burn injury

and accident.

-

’

-

E

12

Warning

*

Storage and Operation Locations

Do not store or use the product in any

of the locations described below.

Doing so creates the risk of fire and

electric shock.

•Areas subjected to large amounts of moisture

and dust

• Food preparation areas, near a humidifier, or

in areas where the product is exposed to oil

smoke or water vapor

• Areas where there is strong vibration

• Other areas where there are high or low

temperatures (Operating temperature range:

5°C to 35°C (41°F to 95°F))

Do not place the product on an

unsteady platform, on a high shelf, or

in any other unstable location.

Dropping and tipping over creates the

risk of personal injury.

Location

Do not place heavy objects on the

product or climb up on it.

Doing so creates the risk of fire and

electric shock.

Do not leave the product in a lavatory,

a bathroom, or anywhere else there is

the chance that it will become wet.

Moisture creates the risk of fire and

electric shock.

Lock the wheels. (When using the

product on a handcart, etc.)

Dropping and tipping over create the

risk of personal injury.

In the case of a lightning storm, do

not touch the device plugged into

the power outlet

Lightning creates the risk of electric

shock.

Remote controller

Never try to take the remote controller

apart or modify it in any way. Doing so

creates the risk of electric shock, burn

injury, and other personal injury. Be sure

to leave all internal inspection,

adjustment, and repair up to your

original dealer or authorized CASIO

service center.

Never allow the remote controller to

become wet. Water creates the risk of

fire and electric shock.

-

%

+

’

!

-

13

Warning

*

YW-41 wireless adapter

Keep the wireless adapter out of the

reach of small children.

Accidental swallowing of the wireless

adapter creates the risk of suffocation

and personal injury.

Radio waves emitted by the YW-41

wireless adapter

Never use this product inside of an

aircraft or medical facility, or in any

other location where use of such

devices is prohibited. Radio waves can

have an effect on the operation of

electronic equipment and medical

equipment, and cause accidents.

Do not use this product in the vicinity of

high-precision electronic instruments or

electronic devices that handle weak

radio signals. Radio waves can have an

effect on the operation of such

equipment, and cause accidents.

• If you are using a pace maker or any other

electronic medical device, be sure to consult

your physician or device manufacturer before

using this product.

Do not use flammable gas sprays

nearby

Do not spray flammable gas into or in

the vicinity of the projector. The gas

may ignite and create the risk of fire.

Effect on Other Electronic Devices

When using the product in a medical

facility or aircraft, follow the

instructions of local personnel and

crew concerning use of such devices.

Do not use the product in an area

where use of such devices is

prohibited.

Electromagnetic waves and other

signals emitted by this product may

affect measuring instruments and

create the risk of accident.

Do not use the product in the vicinity

of high-precision electronic equipment

or any electronic equipment that

handles weak signals.

Doing so can cause misoperation and

other problems in the electronic

equipment, and creates the risk of

accident.

Keep this product away from the chest

area of any individual fitted with a

cardiac pacemaker.

Cardiac pacemakers and similar

devices can be affected by

electromagnetism. Should anyone fitted

with a cardiac pacemaker or other

medical device ever experience any

abnormality, move the product away

and contact a physician.

+

-

+

14

AC adapter

Precautions When Cleaning the AC

Adapter

Do not use detergent to clean the power

cord connector of the AC adapter or the

plug at the end of the AC adapter

connector cord.

Battery (Optional YA-B10)

If charging is not complete within the

prescribed amount of time, stop

charging.

Continued charging creates the risk of

battery overheating, fire, and explosion.

Before using or charging a battery, be

sure to read the section of this user’s

guide that covers batteries.

Correctly use batteries, as explained in

this user’s guide.

Keep batteries out of the reach of

small children.

Adult supervision and monitoring are

required whenever there is the

possibility of young children coming

into contact with a battery.

Keep batteries away from pets.

A battery that is chewed on by a pet

creates the risk of malfunction due to

battery fluid leakage, heat generation,

and explosion.

Power Cord

Observe the precautions below in

order to avoid power cord fire and

electric shock.

Backup of important data

Be sure to keep separate written

records of all data stored in projector

memory. Memory data can be lost due

to breakdown, maintenance, etc.

-

+

• Insert the power plug into the outlet as

far as it will go.

• At least once a year, unplug the power

plug from the power outlet and use a

dry cloth to wipe away any dust

buildup from the area between the

prongs of the plug.

• Before moving the product, turn it off

and unplug from the power outlet.

• After use, unplug the power plug from

the power outlet.

• If you do not plan to use the product

for a long time, unplug from the power

outlet.

• When unplugging the power plug, do

not pull on the power cord. Grasp the

plug.

• Do not use detergent when cleaning

the power cord, especially the power

plug and jack parts.

+

$

-

+

Caution

*

15

Caution

*

Remote Controller Battery

Precautions

Observe the precautions below.

Failure to do so can cause a battery to

rupture, creating the risk of fire,

personal injury, and soiling of nearby

objects by leaking fluid.

Magnetism

This projector has a magnet inside.

Because of this, it should not be used in

the vicinity of anyone wearing a

pacemaker or any other electric medical

device. Should any problem arise, move

the projector away from the person

experiencing the problem and consult a

physician.

Keep the projector away from floppy

disks, magnetic cards, magnetic tapes,

prepaid cards, checks, and any other

media that uses magnetic recording.

The projector can corrupt data recorded

on magnetic media.

Other

Allowing dust to build up inside the projector by

not cleaning it for long periods creates the risk of

fire and accident, and can cause loss of

projection luminosity. Contact your original

dealer or authorized CASIO service center once

a year about having the interior of the projector

cleaned. Note that you will be charged for

cleaning.

User Maintenance

Before cleaning the product, turn off

power, unplug the power plug from the

power outlet, and disconnect the AC

adapter (or battery) from the projector.

Failure to do so creates the risk of

electric shock.

Leaving the AC adapter plugged in

creates the risk of damage to the power

cord, fire, and electric shock.

Once a year, request internal cleaning

(charged separately) from your original

retailer or a CASIO Service Center.

Long-term dust build-up creates the

risk of fire and malfunction.

• Load a battery with its poles (plus (+)

and minus (–)) facing correctly.

• If you do not plan to use the product

for a long time, remove batteries.

• Replace the batteries as soon as

possible after they go dead.

• Use only the specified type of battery.

• Do not use a battery whose covering

has been removed.

• Do not try to take a battery apart and

never allow a battery to become

shorted.

• Do not charge a non-rechargeable

battery.

• Do not mix old and new batteries.

• Do not mix different battery types.

• Do not expose a battery to heat or

throw it into fire.

+

-

+

$

+

16

Operating Precautions

The projector’s light source unit uses a laser and LED.

The life of the light source unit is rated at approximately 20,000 hours. The actual life will depend on

use conditions, the settings configured on the setup menu, and differences between each individual

light source unit.

The light source unit is warranted for the period noted on the warranty certificate or for 6,000 hours,

whichever comes first.

The failure of the light source unit to light or a noticeable drop in light source unit brightness

indicates the end of the light source unit’s life. Contact your original dealer or authorized CASIO

service center for replacement. Note that problems caused by unauthorized projector disassembly

or modification are not covered by the warranty and are not eligible for repair by CASIO.

About the Light Source Unit

Do not block light output or look directly into the

lens!

Never block light output while the light is on.

Never look directly into the lens while the light is on. Particular care is

required when children are present.

RISK GROUP 2

As with any bright light source, do not stare into the beam, RG2 IEC 62471-5:2015.

17

Laser Precautions (Label )

This projector is a Class 1 laser device that conforms to IEC 60825-1: 2014.

This projector has a built-in laser module. Disassembly or modification is very dangerous and

should never be attempted.

Any operation or adjustment not specifically instructed by the user’s guide creates the risk of

hazardous laser radiation exposure.

Laser Precautions (See the label on the projector)

Laser Notice No.57

During use, supervise children in the area and never allow them to stare into the projector beam at

any distance from the projector.

Do not use the remote controller to start the projector while in front of the projection lens.

Avoid the use of optical aids such as binoculars or telescopes inside the beam.

Bottom

Label 

18

To prevent shorts in the AC adapter connector cord, note the precautions below.

Do not use strong force to pull on the cord.

Do not use strong force when coiling the cord.

Do not bend the cord at the point where it connects to the AC adapter (Figure 1).

Do not wrap the cord around the AC adapter (Figure 2).

When coiling the cord, secure it with the hook-and-loop fastener in a way that does not put

pressure on the point where the cord connects to the AC adapter (Figure 3).

.

All figures are for general reference purposes only. The actual appearance of the provided AC adapter

is different from that shown here.

AC Adapter Precautions

Figure 1 Figure 2 Figure 3

19

Charging Precautions

Charge a battery in a location whose ambient temperature is between 10°C and 30°C (50°F to

86°F).

Charging may take longer, or full charging may not be possible under temperatures outside of this

range.

Charging may not be possible if the ambient temperature and battery temperature is too high or too

low. If this happens, remove the AC adapter from the battery and place the battery in a location

whose ambient temperature is between 10°C and 30°C (50°F to 86°F) for a while, and then try

charging in that location.

A battery that has not been charged for a very long time (about six months) may take longer than

usual to charge. Charging will stop automatically if a battery has not become fully charged after

about six hours of charging.

Precautions When Using a Battery

Due to battery characteristics, a charged battery will provide less operating time under cold

temperatures than it provides under normal temperatures.

Do not break or remove the outer label of a battery.

If a battery goes dead very shortly after it is charged, it probably means that the battery has reached

the end of its service life. If this happens, purchase a new battery.

Do not connect two batteries to each other.

Precautions During Battery Storage

Keep batteries out of areas subjected to high temperatures and humidity. Store them in a cool

place.

To prevent over-discharge, charge a battery to a charge level of 60-41% at least once every six

months. For details about charge levels, see “Indicator During Charging” (page 31).

You may not be able to get a battery to start charging if it has not been charged for a long time

(about six months). If this happens, contact your original retailer or a CASIO Service Center.

If a battery is not used for approximately 1.5 months, it will automatically go into a low-power mode.

A battery will not supply power while in the low-power mode. Charging the battery will exit its low-

power mode and allow it to supply power.

A battery deteriorates over time. The pace of the deterioration depends on ambient temperature

and the charge state of the battery. In particular, a fully charged battery that is left in a hot

environment tends to deteriorate more rapidly, regardless of whether it is being stored or used

there.

Battery (Optional YA-B10) Precautions

*Battery Precautions

Observe the precautions below. Failure to do so can cause the battery to explode

or leak flammable liquid or gas.

Do not burn a battery or dispose of it in an incinerator, or by mechanical crushing or cutting.

Do not subject a battery to excessively high or low temperatures during use, storage, or

transport.

Do not subject a battery to excessively low barometric pressure during use, storage, or

transport.

20

Handling rechargeable batteries (Please recycle!)

Be sure to recycle no longer needed batteries to help conserve precious resources. Do not

disassemble batteries. Recycle them “as-is”. Contact your original dealer or authorized CASIO service

center for information about recycling.

The soft inner case protects your projector and battery from scratching and dust. It does not protect

against damage due to dropping or strong external impact.

Never try to load the projector into the case with its battery connected.

The projector will be hot after use. Take care when handling it and inserting it into the soft inner

case.

Liquids, rubbing against other objects, and other rough treatment may cause color fading and/or

discoloration.

Prolonged close contact with clothing and other materials may cause color fading and/or color

transfer, chemical changes to the case surface, etc.

Prolonged exposure to direct sunlight may cause color fading or discoloration.

Storing in a well-ventilated location is recommended.

Clean with a soft, dry cloth.

This projector is made of precision components. Failure to observe the following precautions can

result in inability to correctly save data and malfunction.

Never use or store the projector in the following locations. Doing so creates the

risk of malfunction of and damage to the projector.

Never use the projector in an environment where large amounts of oil smoke are

present. In particular, ceiling or wall mounting the projector in an environment

where large amounts of oil smoke are present can result in the projector falling

from its mounting.

Ensure that the remote control signal receiver is not exposed fluorescent light,

sunlight, or other strong light. Strong light can cause malfunction.

Soft Inner Case (Optional YB-3) Precautions

Other Precautions

Locations subjected to electrostatic charge

Locations subjected to temperature extremes

Locations where there is extreme moisture

Locations subjected to sudden temperature changes

Locations where there is a lot of dust

On a shaky, slanted, or otherwise unstable surface

Locations where there is the danger of getting wet

Locations where there are large amounts of oil smoke or other smoke

Locations where there is the risk of salt damage

Locations where corrosive gas (such as the sulfur gas at hot springs) is generated

Page is loading ...

Casio CX-E1, CX-F1UPD User manual

This manual is also suitable for

Casio CX-E1, CX-F1UPD User manual

Related papers

Other documents