2. WASSERSTEIN
  3. Headset Charging Station
Headset Charging Station

WASSERSTEIN Headset Charging Station User manual

  • Hello! I'm a chat assistant, and I've read the user manual for the Charging Station. This document provides clear instructions on how to set up and use the charging station for your Oculus Quest 2, including how to mount it on the wall. The charging dock has features like controller slots and magnetic cable for convinient charging. I am here to help, so feel free to ask any questions you might have about it.
  • How do I turn on the charging station?
    How do I know when my Oculus Quest 2 is fully charged?
    How do I mount the charging station on a wall?
Headset Charging
Station Compatible
with Oculus Quest 2
USER MANUAL
In the Box
1 x charging station
2 x wireless
connectors
2 x mounting screws + wall anchors
1 x marking paper 1 x power cable
page 1
1. Charging dock
2. Controller slot
3. Nose stand
4. Ambient light
5. Magnetic cable
6. USB-C port
7. Power switch
8. Power cable
Introduction to Parts
13
2 4 2
5
7
6
8
page 2
How to Setup
1. Plug one end of the charging cable provided into the
USB-C port at the back of the charging dock. Plug the other
end into the original adapter that came with your Oculus
Quest 2 headset.
2. Turn on the device by flipping the power switch. The
ambient light will turn on, indicating that it is ready to use.
page 3
3. Plug the wireless connector into the charging port of your
Oculus Quest 2 headset. Then place it onto the charging
dock. Make sure the magnetic cable is firmly set in the
connector.
page 4
How to Charge
1. The Power light on the Oculus Quest 2 will turn solid
orange when charging, and solid green when fully charged.
2. Store the controllers by holding the grip button and and
placing them in the slots.
3. Once fully charged, turn off the charging dock.
How to Mount on a Wall
1. Plan the best route for your cable. Use the marking paper
to mark the holes at your preferred location. Make sure the
holes are level.
Note: Mounting the charging dock onto the wall may require
professional skills and experience.
page 5
2. Drill the holes and insert the wall anchors and screws
provided.
3. Mount the charging dock by hanging it on screws.
4. Attach the nose stand by clicking it into place.
5. Place your headset and controllers securely onto the dock.
Make sure the magnetic cable is firmly connected when
charging.
page 6
Input: DC 5V / 9V
Output: 5V 3A/ 9V 2A
Product size: 11.8 x 4.7 x 3.5 in
Weight: 0.52 lb
Specifications
Get More Support
Oculus Quest 2 is not included.
Oculus is a trademark of Facebook
Technologies, LLC. Wasserstein is not
affiliated with Facebook Technologies, LLC.
Wasserstein is a trademark of Dropcases Ltd. Made in China
www.wasserstein-home.com
Scan the QR code below or email us at
[email protected]
/