2. WASSERSTEIN
  3. Carrying Case
Carrying Case

WASSERSTEIN Carrying Case User manual

  • Hello! I'm a chat assistant, and I've reviewed the user manual for the Wasserstein Carrying Case, Pro Head Strap, and Face Pad Cover designed for the Oculus Quest 2. I understand how to use the carrying case, install the head strap, and attach the face pad cover. I am ready to answer your questions about these products based on this manual.
  • What devices are compatible with this carrying case?
    How do I secure the controllers in the carrying case?
    How do I install the Pro head strap?
    How do I place the face pad cover?
Carrying Case with Pro Head Strap
and Face Pad Cover
Compatible with the Oculus Quest 2 VR headset
USER MANUAL
Page 1
In the Box
Carrying Case
1. Place the controllers in their custom slots and use the velcro strap to
secure them in place.
2. Place the VR headset with the head strap into the slot as shown below.
face pad coverpro head strap
carrying case
How to Use
touch controller
VR head strap
Page 2
Pro Head Strap
1. Remove the original head strap.
2. Connect the new head strap by inserting the contacts on the sides.
3. Attach the velcro strap to the top of the head strap and headset (optional).
Page 3
4. Place on your head and adjust to your preferred position. Tighten the head
strap by turning the back knob clockwise.
Face Pad Cover
1. Line up the cover with the facial interface and press it in.
Get More Support
Scan the QR code below or email us at [email protected].
Specifications
Weight:
Size:
Strap adjustable length:
Materials:
0.46 lb / 209 g (head strap)
1.3 lb / 570 g (case)
8.6 x 12.9 x 6.3 in (case)
5.5 - 9.4 in / 14 - 24 cm
EVA (case) / ABS + POM (head strap) /
Silicone (face pad cover)
Oculus Quest 2 is not included.
Oculus Quest 2 is a trademark of Facebook
Technologies, LLC.
Wasserstein is not affiliated with Facebook
Technologies, LLC.
Wasserstein is a trademark of Dropcases Ltd. Made in China
www.wasserstein-home.com
/