2. Avermedia
  3. BU113

Avermedia BU113 Quick start guide

  • Hello! I've reviewed the user guide for the AVerMedia Live Streamer CAP BU113. This device can be used as a camera in Zoom Rooms or for sharing content between laptops via HDMI. I'm ready to answer any questions you might have regarding its setup and use.
  • How do I connect the Live Streamer CAP 4K to my computer?
    Do I need to install drivers for the Live Streamer CAP 4K?
    How do I use the Live Streamer CAP 4K as a camera in Zoom Rooms?
    How do I use the device as a content sharing device?
Setting Up Live Streamer CAP 4K for Zoom Rooms
Follow the steps below to set up your Live Streamer CAP 4K (BU113) for the Zoom
Rooms.
1. Connect the BU113’s USB-C port to your video conferencing computer (i.e. a NUC
or mini PC).
2. Once the BU113 is recognized by the system, it is ready to goβ€”no driver is
required.
3. Connect the BU113’s HDMI port to a laptop via an HDMI cable.
4. If you don’t have a camera for the meeting room, you can set up BU113 as one in
Zoom Rooms. Start Zoom Rooms > go to your Zoom account > ADMIN > Room
Management > Zoom Rooms > Rooms > Edit (from the room where the meeting
is held).
5. Once in Edit, go to Devices > Camera > select Live Streamer CAP 4K > Save.
If you already have a dedicated camera, you can use BU113 as another camera
for quick content sharing from one laptop to another using the HDMI cable. To do
so, open your Zoom Rooms Controller > Share Content > Camera > select Live
Streamer CAP 4K. Below is Room Controller app on a smartphone.
/