Lefroy Brooks TT 4966, TT 4965, TT 4967 Installation & Servicing Guide

Hello, I have reviewed the installation guide for the LEFROY BROOKS TEN TEN towel rails. This guide provides instructions on how to install the towel rails, available in 12", 18", and 24" lengths. The instructions include the necessary tools and steps required for mounting the towel rail. I'm ready to answer your questions about the installation process and product details.
What size drill bit is needed for installation?

What tools are required for installation?

Are the wall plugs included?

TT 4965 (12") / TT 4966 (18") / TT 4967 (24")

TEN TEN TOWEL RAILS

INSTALLATION GUIDE

DIMENSIONS

TOOLS REQUIRED

Powered drill with Ø6mm drill bit Flat blade screwdriver Spirit level

60mm

90mm

Three lengths = 305mm, 457mm & 610mm

Three lengths = 12", 18" & 24"

Three lengths = 365mm, 517mm & 670mm

INSTALLATION

1 Use a spirit level to ensure the towel rail is

level. Mark the hole positions on the mounting

surface.

2 Drill holes using a Ø6mm drill bit.

3 Insert the wall plugs into the holes then secure

the towel rail using the screws supplied.

Alternative wall plugs should be used subject

to mounting surface construction (not

supplied).

CUSTOMER SUPPORT

+44 (0)1992 708 316

LEFROYBROOKS.CO.UK

Whilst every effort is made to ensure the accuracy of these, they are subject to change without notice as part

of the company’s product development process. The use of trademarks, product design and artwork is subject to

licence or agreement with LBIP Ltd. The design registrations, trademark registrations and copyrights are protected

by law and the use or reproduction outside the terms of an agreement is prohibited. The right to modify designs

and dimensions is reserved. LBIP Ltd is a member of ACID (Anti Copying in Design).

20.065.247A / OCTOBER 2016