2. Lefroy Brooks
  3. DP 4605

Lefroy Brooks DP 4605 Installation & Servicing Guide

  • Hello! I'm a chat assistant trained on the DP 4605 Fifth Hook Installation Guide from LEFROY BROOKS. I've reviewed the guide and understand the installation process, including the required tools and steps to secure the hook. I'm ready to answer questions you have about the installation of this device.
  • What size drill bit is needed for installation?
    Is the hexagonal key included?
    What tools are needed for installation?
DP 4605
FIFTH HOOK
INSTALLATION GUIDE
12mm
72mm
25mm
50mm
9mm
18mm
centres
9mm
29mm
2
DIMENSIONS
TOOLS REQUIRED
Powered drill with
Ø6mm drill bit
Flat blade screwdriver Spirit level Hexagonal Key
Not to scale
2 3
INSTALLATION
4 Locate the hook onto the wall fixture (A). 5 A hexagonal socket set screw is located in the
underside of the hook. Secure the hook using
the hexagonal key (supplied) (B).
1 Mark the hole positions for the wall fixture
on the mounting surface. Use a spirit level to
ensure the holes are vertically aligned.
2 Drill holes using a Ø6mm drill bit.
3 Insert the wall plugs into the holes then secure
the wall fixture using the screws supplied.
A
B
CUSTOMER SUPPORT
+44 (0)1992 708 316
LEFROYBROOKS.CO.UK
Whilst every effort is made to ensure the accuracy of these, they are subject to change without notice as part
of the company’s product development process. The use of trademarks, product design and artwork is subject to
licence or agreement with LBIP Ltd. The design registrations, trademark registrations and copyrights are protected
by law and the use or reproduction outside the terms of an agreement is prohibited. The right to modify designs
and dimensions is reserved. LBIP Ltd is a member of ACID (Anti Copying in Design).
© LBIP Ltd 2016
20.065.214A / AUGUST 2016
/