Lefroy Brooks DP 4600 Installation & Servicing Guide

Type
Installation & Servicing Guide
DP 4600
FIFTH PAPER HOLDER
INSTALLATION GUIDE
3
41.5mm
90mm
93mm
83mm
41.5mm
Ø8.5mm
9mm
7mm
102mm
105mm149mm
50mm
3
DIMENSIONS
Not to scale
4
INSTALLATION
4 Locate the paper holder onto the wall
xture (A).
5 The upper rear section has two hexagonal
socket set screws located on the underside.
Locate the paper holder using the hexagonal
key (supplied) (B).
1 Mark the hole positions for the wall fixture
on the mounting surface. Use a spirit level to
ensure the holes are level.
2 Drill holes using a Ø6mm drill bit.
3 Insert the wall plugs into the holes then secure
the wall fixture using the screws supplied.
A
B
B
OR
5
REMOVAL OF THE PAPER HOLDER BAR
6 The paper holder bar is spring loaded at one
end. Gently move the paper holder bar to
one side (A).
7 Lift the opposite end clear of the support
arms (B).
8 Fit in reverse. Fit spring loaded end first.
A
B
A
B
Whilst every effort is made to ensure the accuracy of these, they are subject to change without
notice as part of the company’s product development process. The use of trademarks, product design
and artwork is subject to licence or agreement with LBIP Ltd. The design registrations, trademark registrations
and copyrights are protected by law and the use or reproduction outside the terms of an agreement is prohibited.
The right to modify designs and dimensions is reserved. LBIP Ltd is a member of ACID (Anti Copying in Design). E&OE
© LBIP Ltd 2021
CONTRACT ENQUIRIES
+44 (0)1992 708 316
info@lefroybrooks.co.uk
CUSTOMER SERVICE, SPARES & TECHNICAL ENQUIRIES
+44 (0)1902 390 894
technical@lefroybrooks.co.uk
LEFROYBROOKS.CO.UK
20.065.210B / NOVEMBER 2021
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Lefroy Brooks DP 4600 Installation & Servicing Guide

Type
Installation & Servicing Guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI