2. Riverside Furniture
  3. Sophie 50346

Riverside Furniture Sophie 50346, 50346 Assembly Instructions

  • Hello! I'm the chat assistant. I've reviewed the assembly instructions for the Riverside Furniture Sophie 50346 Dining table. This document includes a component list, hardware list, and step-by-step instructions for assembling the 76-inch counter height table. I'm ready to answer any questions you might have about assembling your table.
  • What is the length of the table?
    What tools are needed for assembly?
    What kind of bolts are used?
Components and Hardware List
Made in Viet Nam
Page 1 of 2
A2 pcs.
B
EFG
Table Top
M5/16"-18 x 3-3/8"
Long Allen Head
Bolt
5mm Allen Wrench
5/16" x 19 x 2mm
Flat Washer
5/16" Spring
Washer
1 pc.
14 pcs. 18 pcs. 18 pcs.
1 pc.
Be sure to check all packing material carefully for small parts, which may have come loose inside the carton during
shipment.
To prevent possible scratches and damage, this furniture should be assembled on a soft surface such as a blanket or
carpet.
D
Leg Frames
C
Bottom Stretcher
I
Step 1: Assemble the Top Stretchers (B)
between the two Leg Frames (C) as shown
using the 2" Long Allen-Head Bolts (F),
Spring Washers (G) and Flat Washers (H).
Tighten with the 5mm Allen Wrench (I).
Step 1: Assemble the Bottom Stretcher (D) to
the two Leg Frames (C) by using the 3-3/8"
Long Allen-Head Bolts (E), Spring
Washers (G) and Flat Washers (H). Tighten
with the 5mm Allen Wrench (I).
2 pcs.
1 pc.
Top Stretcher
M5/16"-18 x 2"
Long Allen Head
Bolt
4 pcs.
#50346
76-in Counter Ht Table
Sophie
Dining Room
Assembly Instructions
H
Made in Viet Nam
Page 2 of 2
Step 3: Place the Table Top upside down on a soft surface. Move the assembled Table Base to the
bottom of the Table Top. Connect using the 3-3/8" Long Bolts and Washers. Tighten with the Allen
Wrench (I). Carefully set the assembled Table upright.
Sophie
Dining Room
Assembly Instructions #50346
76-in Counter Ht Table
Adjustable leveler
( E x 10 )
/