2. Riverside Furniture
  3. 37259

Riverside Furniture 37259 Assembly Instructions

  • Hello! I'm your chat assistant. I've reviewed the assembly instructions for the Riverside Furniture Dining Bench, model 37259. This document provides a step-by-step guide with a hardware list to assemble the bench, emphasizing the need for two people to assemble. I am ready to help you with any questions you have about the assembly process.
  • How many people are required to assemble this product?
    What kind of surface should be used for assembly?
    Is screwdriver needed to assemble this product?
Made in Viet Nam
email: info@riverside-furniture.com
Page 1 of 3
Warning :
- Be sure to check all packing material carefully for small parts,
which may have come loose inside the carton during shipment.
- To prevent possible scratches and damage, this furniture MUST
BE ASSEMBLED BY TWO PEOPLE on a soft surface such as
a blanket or carpet.
12 pcs. 12 pcs.
Bench Seat
B
A
Spring Washer
5/16''
C
EFG
Flat Washer
5/16" x 16*2mm
37259 - Dining Bench
HIL
J
1 pc.
Allen Head Bolt
5/16''x 18x1- 3/4"
STEP 1: Do not fully tighten bolts
D
D
1 pc.
5mm Allen Key #8x1-1/4 Screw
6 pcs.
Leg (Left)
Bottom Stretcher
1 pc.2 pcs. 2 pcs. 2 pcs.
Leg (Right)Middle Leg
12 pcs.
Screw Driver
not included
Cora
Dining Room
Assembly Instructions
FGHI
FGHI
C
B
Made in Viet Nam
email: info@riverside-furniture.com
Page 2 of 3
37259 - Dining Bench
STEP 2: Do not fully tighten screws
STEP 3: Do not fully tighten bolts
Cora
Dining Room
Assembly Instructions
J
E
FGHI
FGHI
C
B
Made in Viet Nam
email: info@riverside-furniture.com
Page 3 of 3
STEP 4: Using the Allen key and a Phillips head screw driver,
tighten all bolts, then tighten all screws.
Complete
37259 - Dining Bench
Cora
Dining Room
Assembly Instructions
Adjustable Leveler
6Pcs
J
/