Panasonic Personal Computer CF-18 User manual

1

Personal Computer

Reference Manual

Model No. CF-18 Series

XP

We recommend that this Reference Manual be printed.

2

Read Me First

 Some of the illustrations in this manual may differ slightly in shape from the actual items in

order to make the explanation easier to understand.

 If the user has logged on without the administrator authority, some functions may not be

executable, and some screens may be not displayed as shown in this manual.

If this happens, log on with the administrator authority to enable these functions.

 Confirm the latest information on optional products in catalogs, etc.

 The following drives may be described as "CD/DVD drive".

CD-ROM drive, DVD-ROM drive, CD-R/RW drive, DVD-ROM & CD-R/RW drive, DVD

MULTI drive

Illustrations and Terminology in this Reference Manual

NOTE NOTE provides a useful fact or helpful information.

CAUTION CAUTION indicates a condition that may result in

minor or moderate injury.

Enter

This illustration means to press the [Enter] key.

Fn

+

F5

This illustration means to press and hold the [Fn] key,

then press the [F5] key.

[start] - [Run] This illustration means to click [start], then to click

[Run]. For some applications, you may need to double-

click.

 or ⇒ These symbols indicated related pages.

 : Refer to the page in this Reference Manual

⇒ : Refer to the Operating Instructions

cccc

*1

If

*1

is selected, it will jump to a related explanatory

note.

3

Read Me First

The terminology in ( ) is the one used in [Intel(R) 82852/82855 GM/GME Graphics Controller

Properties].

To display [Intel(R) 82852/82855 GM/GME Graphics Controller Properties]:

Select [start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) Extreme Graphics].

About Display Mode

Internal LCD (Notebook) This computer's display

External Display (Monitor) External display connected to this computer

Simultaneous display

(Intel(R) Dual Display Clone)

To display the same screen on both the LCD and

external display

Extended Desktop To use both the internal LCD and the external display as

an extended display domain. You can drag a window

from the internal LCD to the external display.

4

Key Combinations

CAUTION

 Do not press the following key combinations repeatedly in (quick) succession. Also, do

not press different key combinations quickly one after another.

 Do not press the following key combinations while using the touch pad (external

mouse), touchscreen, tablet buttons, or other keys.

NOTE

 Do not press the following key combinations until you log on to Windows and the hard

disk drive indicator turns off. Note, however, that the key combinations

Fn

+

F1

,

Fn

+

F2

and

Fn

+

F3

are operable in the Setup Utility.

 The key combinations below may not work while some applications are running. The

popup window may not be displayed depending on the state of the application you are

using (e.g., when [Command Prompt] is set to "Full Screen").

Key Functions Popup Window

(Displayed after logging

on to Windows)

Fn

+

F1

Fn

+

F2

LCD brightness control (down)

LCD brightness control (up)

Pressing this key combination adjusts the

brightness of LCD.

You can select a different brightness level setting

for when the AC adaptor is connected and for when

it is not connected.

5

Key Combinations

Fn

+

F3

Display change

(When the external display is connected)

By pressing this key combination, you can select

either an external display, internal LCD or

simultaneous. ( page 67)

This key combination does not work when

[Command Prompt] is set to "Full Screen".

CAUTION

 Do not press another key until the display

destination has been completely switched.

 Do not press this key combination in the

following conditions.

When the external display is not connected.

• When a video such as an MPEG file is

playing.

• When the Extended Desktop is being

utilized.

• When a game such as pinball is

displayed.

NOTE

 When switching to a different user with the

Fast User Switching function, this key

operation may not work. In this case, log off

all users and restart the computer.

Key Functions Popup Window

(Displayed after logging

on to Windows)

6

Key Combinations

Fn

+

F4

Speaker on/off switch

Pressing this key combination turns on/off audio

from the internal speaker and headphone jack.

NOTE

 Disabling the speakers will also disable the

warning beep.

 Speakers connected to the USB port

cannot be muted.

OFF

(MUTE)

ON

Fn

+

F5

Fn

+

F6

Volume control (down)

Volume control (up)

Pressing this key combination adjusts the volume

of the internal speaker and headphone jack.

NOTE

 This key combination cannot be used to

adjust the volume of the warning beep or

speakers connected to the USB port.

Fn

+

F7

Power off using the standby function

Pressing this key combination causes the current

status of the computer to be saved to the memory,

and powers off the computer. ( page 36)

Key Functions Popup Window

(Displayed after logging

on to Windows)

7

Key Combinations

Fn

+

F9

Remaining capacity of the battery pack

Pressing this key combination displays the

remaining battery capacity on the screen.

When the battery pack is

inserted in the computer

(example)

 In normal

temperature mode

( page 52)

 In high temperature

mode ( page 52)

When the battery pack is

not inserted in the

computer

Fn

+

F10

Power off using the hibernation function

Pressing this key combination causes the current

status of the computer to be saved to the hard disk,

and powers off the computer. ( page 36)

Key Functions Popup Window

(Displayed after logging

on to Windows)

8

Key Combinations

There are two Fn key functions as follows:

 Fn key lock function

After

Fn

is pressed once, it stays in the "pressed" position until another key is pressed.

This is convenient when it is difficult to press two buttons simultaneously.

 Popup windows display ON/OFF

1 Run the Hotkey Settings.

Select [start] - [All Programs] - [Panasonic] - [Hotkey Settings].

2 Set the parameters.

A. Use Fn key lock

Add the check mark if you want to enable the Fn key lock function. The following

Fn key lock function will then be enabled.

 To use

Fn

only once:

A Press

Fn

once. (Locked)

B Press another key for combination. (Lock released)

 To use

Fn

successively:

A Press

Fn

twice. (Locked)

B Press another key for combination.

Fn key remains locked until

Fn

is pressed once more.

B. Notification

This setting is only available when [Use Fn key lock] is checked.

[Make sounds when Fn key is pressed]

*1

Notifies the user with a sound when

Fn

is locked or released.

[Show status on screen]:

Displays the Fn key status on the taskbar.

:

Fn

is locked

:

Fn

is not locked

C. Disable popup

Add the check mark if you want to turn the popup window display function OFF.

The full-screen display of [Command Prompt] screen or MPEG files may change

to a window display if

Fn

+

Fx

*2

keys are pressed. To prevent this, turn the popup

window display function OFF.

Hotkey Settings

9

Key Combinations

3 Select [OK].

NOTE

 The Fn key lock function also works with

Fn

and other keys (e.g. , ) aside from

Fx

*2

.

 Each user can select separate settings for whether or not to use the Hotkey settings.

*1

If MUTE is set, you will not hear a beep.

*2

"

Fx

" indicates any function key from

F1

to

F10

.

10

LED Indicators

Power status  Not lit

Power off / Hibernation mode

 Green

Power on

 Blinking green

Standby mode

Battery pack status  page 50

Caps Lock This indicator lights green when

Caps Lock

is

pressed. Subsequent non-shifted input is

capitalized.

NumLk

(Numeric key)

This indicator lights green when

NumLk

is

pressed. This causes a portion of the keyboard

to function as a numeric keypad. The [Enter] key

functions differently depending on the

application.

ScrLk

(Scroll lock)

This indicator lights green when

Fn

+

ScrLk

are

pressed. Scroll lock functions differently

depending on the application.

Hard disk drive status This indicator lights when the hard disk drive is

accessed.

11

Tablet Buttons

When the Windows screen is displayed, you can use the tablet buttons to perform the

following operations.

Button Functions Function Descriptions

LCD brightness control

:down

:up

Pressing these buttons adjusts the brightness

of the LCD.( page 4)

Input Panel Pressing this button turns the software

keyboard on or off.( page 27)

Enter Same operations as when

Enter

is pressed.

Rotation Pressing this button rotates the

display.( page 33)

NOTE

 Do not press the rotation button again

until the display has completely

stopped rotating.

Security  On the Windows logon screen or the

Welcome screen:

Same operation as when

Ctrl

+

Alt

+

Del

are pressed.

 After logging on to Windows:

Pressing this button locks the computer.

NOTE

 This button will not work while the

screensaver is running.

12

Tablet Buttons

NOTE

 If the computer is set to display the password input screen when resuming from the

screensaver, the input panel, enter, and rotation buttons will not work while the

screensaver is operating.

 Immediately after Windows is started up, or the Windows logon screen (or the

Welcome screen) is displayed, the tablet buttons may not work. After waiting for a

while, try pressing the tablet buttons again.

Some of the tablet buttons can be disabled or assigned to other operations.

NOTE

 Each user can select separate settings for the tablet buttons.

 Changing the Settings

The Input Panel ( ), Enter ( ), and Rotation ( ) buttons can be assigned the following

operations as alternatives to the ones listed above. ( page 11)

 Press a key or key combination

 Launch an application

 Turn off screen

 Turn Wireless LAN on or off (Only for models with wireless LAN)

• This function requires the installation of the Intel

®

PROSet/Wireless Software. (Installed

in factory preset.)

 Turn Bluetooth on or off (Only for models with Bluetooth)

• Install "Bluetooth Switch" following the procedure below to enable this function.

A Select [start] - [Run], enter "c:\util\bluesw\setup.exe", and then select [OK].

If the message [Confirm File Deletion] is displayed, select [OK], select [Finish],

and then perform the procedure again from step A.

B At [Welcome to the InstallShield Wizard for Bluetooth Switch...], select [Next].

C Select [Yes, I want to restart my computer now], and select [Finish].

The computer will restart.

Changing the Settings of Tablet Buttons

13

Tablet Buttons

1 Select [start] - [All Programs] - [Panasonic] - [Tablet Buttons Settings].

2 Select the tablet button you want to change and select [Change].

3 Select the function to be assigned to the button from the [Action] list.

 When you select [Press a key or key combination], select the keys box and

press the key or the key combination you want to use.

•

Fn

cannot be used.

 When you select [Launch an application], select [Browse] to set an application

to launch.

The following kinds of files can be registered:

• Executable files (.exe)

• Shortcuts to files (.lnk)

• Files tied in with applications (such as .doc and .txt)

If parameters are required, describe them after the filenames.

4 Select [OK].

5 Select [OK].

NOTE

 On the Windows logon screen or Welcome screen, tablet buttons work in the default

setting.

 Disabling the tablet buttons

The Security ( ), Input Panel ( ), Enter ( ), and Rotation ( ) buttons can be disabled

following the procedure bellow.

1 Select [start] - [All Programs] - [Panasonic] - [Tablet Buttons Settings].

2 Remove the checkmark from [Enable Security, Input Panel, Enter,

Rotation Button.]

3 Select [OK].

14

Tablet Buttons

NOTE

 On the Windows logon screen or Welcome screen, the tablet buttons cannot be

disabled.

15

Touch Pad

Use the touch pad to move the cursor on the screen and perform computer operations.

A. Work Surface (Touch Pad)

B. Left Button

C. Right Button

The touch pad has the following two modes of operation.

Typical mouse operations use the area (F): When no check mark is added for [IntelliMouse

Wheel mode], [Horizontal] and [Vertical] of [Scroll Configuration], the entire surface can be

used for typical mouse operations.

NOTE

 When the display is rotated, the scroll functions described above will not work.

Microsoft

®

IntelliMouse™ Wheel Mode

(Setting at the time of purchase)

Original Mode

Wheel mode operations (almost identical to

the case of using the Microsoft

®

IntelliMouse™ for scroll, zoom, etc.,

operations) are possible for Microsoft

®

wheel function-compatible applications.

Microsoft

®

IntelliMouse™ is a mouse-type

device that, in addition to the two

conventional buttons, incorporates a wheel

able to rotate forwards/backwards.

Only scroll operation is possible for

applications not compatible with the

Microsoft

®

wheel function.

Even for applications compatible with the

Microsoft

®

wheel function, there are cases

where only vertical scrolling or only

horizontal scrolling is possible in this mode.

Scrolling Area

D. Scrolling up/down

For the Pan and Auto

Scroll functions, the

entire work surface of the

touch pad can be used

for scrolling.

Scrolling Area

D. Scrolling up/down

Possible when a check

mark is added for

[Vertical].

E. Scrolling side-to-side

Possible when a check

mark is added for

[Horizontal].

16

Touch Pad

 When you are not sure whether an application is compatible with the Microsoft

®

wheel

function or not, try using both modes. Depending on the application, there are cases

where scrolling may not be possible with either mode.

Changing the mode of the touch pad

A Display the setting menu.

Select on the taskbar or select [Mouse] in [start] - [Control Panel] - [Printers

and Other Hardware] - [Mouse], and then select [TouchPad].

B Change the settings.

 To set the Microsoft

®

IntelliMouse™ Wheel mode

Add the check mark for [IntelliMouse Wheel mode] of [Scroll Configuration].

 To set the original mode

Remove the check mark for [IntelliMouse Wheel mode] of [Scroll

Configuration] and then add the check mark for [Vertical] and/or [Horizontal].

C Select [OK].

Operating the Touch Pad

Function Operation

Moving the Cursor

Move the tip of your finger lightly over the work

surface.

Tapping/Clicking

tapping or clicking

 To right-click: click with the right button

17

Touch Pad

Double-Tapping/Double-

Clicking

double-tapping or double-clicking

Dragging

Two quick taps, but on the second tap leaving your finger

down (applying pressure) and moving it on the work surface.

or

While holding down the button, moving your finger on the work

surface.

Scroll

*1

Scroll a document.

(rotate the wheel)

*2

Microsoft

®

IntelliMouse™ Wheel Mode

Original Mode

Auto Scroll

*1*3

Automatically scroll a

document.

(move the mouse after

clicking the wheel)

*2

Operate after pressing the two buttons simultaneously.

 When releasing the auto scroll function: One tap on the

work surface.

Function Operation

Î

18

Touch Pad

*1

The movements will differ depending on the application.

*2

Operations to follow when using an external Microsoft

®

IntelliMouse™.

*3

Operation applicable to the Microsoft

®

IntelliMouse™ Wheel mode.

CAUTION

 Do not remove [touchpad/touchscreen] in the following menu.

[start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] -

[Device Manager] - [Mice and other pointing devices]

Pan

*1*3

Scroll in various directions

of a document.

(move the mouse slightly

while holding down the

wheel)

*2

Operate while holding down the two buttons.

Zoom

*1*3

Magnify/reduce the

display of a document.

(rotate the wheel while

holding down

Ctrl

)

*2

Ctrl

+

A. Magnify

B. Reduce

Data Zoom

*1*3

Display or hide a

document, or perform

operations to return to or

proceed with Internet

Explorer.

(rotate the wheel while

holding down

Shift

)

*2

Shift

+

Function Operation

19

Touch Pad

NOTE

 The double-tapping speed of the touch pad can be changed using the following menu.

[start] - [Control Panel] - [Printers and Other Hardware] - [Mouse] - [Tap and Buttons] -

[Double-click Speed]

 The touch pad cannot be used in the Setup Utility.

When you want to use an external mouse through the external keyboard/mouse port of

the port replicator

When an external mouse or trackball with additional functions (e.g., wheel function) is

connected, a part or all of the additional functions may fail to operate. To use these additional

functions, perform the operation below.

If you are using a USB mouse, the following operation is unnecessary.

1 Power off your computer (⇒ Operating Instructions "Starting Up/

Shutting Down") and connect the computer to the port replicator (⇒

Operating Instructions of the Port Replicator).

2 Connect the external mouse or trackball to the port replicator.

3 Turn the computer on and run the Setup Utility ( page 88).

4 In [Main] menu, set [Touch Pad] and [Touchscreen] to [Disable].

5 Close the Setup Utility by pressing

F10

. At the confirmation message,

select [Yes].

6 Log on to Windows with the administrator authority.

7 If the message [Completing the Found New Hardware Wizard] is

displayed, select [Finish].

It may take a few minutes to complete this operation.

8 If the display asks you to restart Windows, select [Yes].

The computer will restart.

20

Touch Pad

9 Following the operating instructions of the connected external mouse

or trackball, install the necessary driver.

When you want to re-enable the touch pad and touchscreen

1 Uninstall the driver or application software of an external mouse or

trackball. (Refer to the operating instructions of the external device on

how to uninstall the driver.)

If the explanation of uninstalling the driver or application software can not be found

in the operating instructions for the external device, execute the following steps.

A In [start] - [Control Panel] - [Performance and Maintenance] - [System] -

[Hardware] - [Device Manager], when an external mouse or trackball device is

displayed in [Mice and other pointing devices], press

Del

to delete it.

B If the confirmation message is displayed, select [OK].

2 If the display asks you to restart Windows, select [No].

3 Power off your computer (⇒ Operating Instructions "Starting Up/

Shutting Down") and remove the external mouse or trackball.

4 Turn the power on and run the Setup Utility ( page 88).

5 In [Main] menu, set [Touch Pad] and [Touchscreen] to [Enable].

6 Close the Setup Utility by pressing

F10

. At the confirmation message,

select [Yes].

7 Log on to Windows with the administrator authority.

8 Select [start] - [Control Panel] - [Printers and Other Hardware] -

[Mouse] - [Hardware].

9 Confirm that [touchpad/touchscreen] is displayed at [Devices].

A Select the external mouse or trackball and then select [Properties].

B Select [Driver] and then select [Update Driver].

Page is loading ...

Panasonic Personal Computer CF-18 User manual

This manual is also suitable for

Panasonic Personal Computer CF-18 User manual

Related papers

Other documents