DX8100 APPROVED SWITCHES
DX8100_APPROVED_SWITCHES
Pelco and the Pelco logo are registered trademarks of Pelco.
Information subject to change without notification.
Copyright 2006, Pelco. All rights reserved.
©
World Headquarters
3500 Pelco Way, Clovis, California 93612 USA
USA & Canada Tel: 866/587-2503 Fax: 800/289-9150
International Tel: 1-559/348-5504 Fax: 1-559/348-1120
www.pelco.com
DX8100 APPROVED SWITCHES
Switch Model Unicast Routing Multicast Routing IGMP Multicast
Flooding
Type
Cisco
3750 Series (EMI) RIPv1,RIPv2,OSPF PIM-SM/DM,DVMRP v1,v2,v3,Snooping,Querier NO I
3550 NO NO Snooping NO II
Hewlet-Packard
Procurve 5300 RIPv1,RIPv2,OSPF PIM-DM v1,v2,Querie
r N
O I
Enterasys
Matrix N-Series Chassis RIP,OSPF** DVMRP v1,v2,Snooping,Querier NO I
Extreme Networks
Alpine RIPv1,RIPv2,OSPFv2 PIM-SM/DM,DVMRP v1,v2,Snooping NO I
Summit RIPv1,RIPv2,OSPFv2 PIM-SM(Limited) v1,v2,Querier NO II
EtherTRAK Industrial
Managed Switch
ET-9MS-1 NO NO v1,v2 NO* II
*If Configured Properly
**Enhanced Software Required
The Cisco 4500 & 6500 Series will also work with the appropriate software. (These are high end Cisco Devices)
/