Pelco DX8100 Setup Dialog Box System User manual
- Type
- User manual
DX8100 SETUP DIALOG BOX
DX8100_SETUP_DIALOG_BOX
Pelco and the Pelco logo are registered trademarks of Pelco.
Information subject to change without notification.
Copyright 2006, Pelco. All rights reserved.
©
World Headquarters
3500 Pelco Way, Clovis, California 93612 USA
USA & Canada Tel: 866/587-2503 Fax: 800/289-9150
International Tel: 1-559/348-5504 Fax: 1-559/348-1120
www.pelco.com
DX8100 SETUP DIALOG BOX
Only a single user with Administrator or Power User access is allowed to access a DX8100’s Setup mode box at one time. When connected to a
network supporting multiple DVRs and/or clients, users with Administrator access override and block Power Users. If two users with the same
access level attempt to enter Setup mode simultaneously, the DX8100 will allow access to setup features on a first-come, first-served basis.
Unavailable setup options will be grayed-out.
ACCESSING THE SETUP MODE
The Setup Mode is accessed from the DX8100 toolbar by clicking the Setup icon. When clicked, the Setup icon opens the Setup dialog box in the
DX8100 view panel. The major configuration categories are displayed on individual tabbed pages. Each configuration page contains all of the
options and parameters for the respective function, that allow you to customize how the DX8100 operates for your particular application. Access
a setup page by clicking its icon that is displayed on the right side of the view panel.
The Setup dialog box allows Administrators and Power Users access to the DX8100’s setup functions. However, only Administrators can define
user names and passwords for new users.
To access the Setup Mode:
On the DX8100 toolbar, click Setup.
The Setup dialog box opens to the default Camera page.
UNDERSTANDING THE SETUP DIALOG BOX
The Setup dialog box opens in the DX8100 view panel to the default Camera page. Excluding the video visible through the Camera page Motion
Zone window, you do not see video from any of the other setup pages. You must exit the Setup dialog box to access the DX8100 functions in the
main window.
The following figure shows the parts of the Setup dialog box.
Item Button Part Description
Camera Click the Camera icon to configure cameras. Available options are PTZ functions, motion detection, picture
adjustment, audio, and video loss detection settings.
Linking Click the Linking icon to configure relays and alarms, associate relays and alarms with cameras, link
relays to alarms, and link cameras to other cameras.
Schedule Click the Schedule icon to build custom recording schedules, set image resolution, frame rate, and image
quality, and configure relay settings.
Network Click the Network icon to set up the network configuration and communication port settings.
Backup Click the Backup icon to configure and perform backups.
User Click the User icon to add, delete, or change user accounts.
Site Click the Site Setup icon to add, delete, and configure additional DX8100 Series DVRs.
System Click the System icon to set up additional system options.
Ext. Monitor Click the Ext. Monitor icon to configure an additional display monitor. (This icon appears only if the
optional display card has been installed.)
Notification Click the Notification icon to configure emergency agent and e-mail notification options.
-
1
Pelco DX8100 Setup Dialog Box System User manual
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Pelco DX8100 User manual
-
-
-
-
-
-
-
-
-