Minolta EP1030 User manual

The essentials of imaging

www.minoltaeuro

p

e.com

User Manual

EP1030/EP1030F

right

Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\FRONT.GB Page 1 of 6

Text produced for: User Manual EP1030/1030F first page in draft i

Rev. 1.x/22.05.02 Table of Contents 1 EP1030/1030F

EP1030/EP1030F

Thank you for choosing Minolta.

This operator's manual explains how to operate the copier and replenish

its supplies. It also gives some troubleshooting tips as well as general

precautions to be observed when operating the copier.

Toensurethebestperformanceandeffectiveuseofyourcopier,readthis

manualcarefullyuntilyoufamiliarizeyourself thoroughlywithits operation

and features. After you have read through the manual, keep it for ready

reference.

Please use this manual as a quick and handy reference tool for

immediately clarifying any questions which may arise.

Description of Icons

CAUTION

Warning for dangerous situations

NOTE

Important informations for handling the copier

1, 2, ... COURSE OF ACTION

Sequence for a course of action

USEFUL TIP

Additional remarks

left

Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\FRONT.GB Page 2 of 6

Text produced for: User Manual EP1030/1030F first page in draft i

EP1030/1030F Table of Contents 2 Rev. 1.x/22.05.02

1 Table of Contents

O Chapter 1 through 3 contain the basic information for making

copies. Be sure to read these chapters before attempting to use

your copier

1 Safety Notes

1.1 Installing the Copier........................2

1.1.1 InstallationSite......................................2

1.1.2 PowerSource.......................................2

1.1.3 SpaceRequirements.................................3

1.2 PrecautionsforUse........................4

1.2.1 OperatingEnvironment................................4

1.2.2 UsingtheCopierProperly..............................4

1.2.3 Moving ............................................5

1.2.4 CareofCopierSupplies...............................5

2 Before Making Copies

2.1 CopierPartsandtheirOperation.............8

OutsidetheCopier................................8

InsidetheCopier..................................9

Semi-automaticDocumentHandler(SDH).............10

2.2 ControlPanelanditsOperation.............11

2.2.1 Control Panel . . . ...................................11

2.2.2 ServiceIndicators...................................11

2.3 TurningON/OFFandInitialMode............12

2.3.1 TurningONandOFF................................12

2.3.2 WhentheCopierisTurnedON.........................12

2.3.3 InitalMode........................................12

2.4 Convenient Functions . . ...................13

Clear/Stop......................................13

AutoReset .....................................13

AutoPowerOff..................................13

right

Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\FRONT.GB Page 3 of 6

Text produced for: User Manual EP1030/1030F first page in draft i

Rev. 1.x/22.05.02 Table of Contents 3 EP1030/1030F

3 Making Copies

3.1 MakingCopies...........................16

3.2 PositioningtheOriginal...................18

3.2.1 PositioningontheGlass............................. 18

PaperOriginals ................................. 18

TransparentOriginals............................. 19

3.2.2 UsingtheSemi-automaticDocumentHandler(SDH)....... 19

GuidelinesforOriginals........................... 19

PositioningtheOriginal........................... 20

3.3 SettingtheNumberofCopies..............21

SettingtheNumberofCopies...................... 21

3.4 SettingImageDensity.....................22

AutoExposureMode............................. 22

ManualExposureMode........................... 23

3.5 ManualBypassCopying...................24

GuidelinesforMultiBypassPaper................... 24

MakingaSingleCopy............................ 24

3.6 HintsforAdvancedCopying...............25

Two-SidedCopying.............................. 25

CompositeCopying.............................. 26

4 Special Functions

4.1 TonerReplenisher........................28

TonerReplenisherFunction........................ 28

4.2 DrumDehumidifier.......................30

Drum Dehumidifier Function ....................... 30

4.3 User’sChoice ...........................31

User’sChoiceItem............................... 31

User's Choice Function and Explanation of Settings . . . . . 31

U-1AutoResetMode............................. 31

MakingUser'sChoiceSelections.................... 32

left

Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\FRONT.GB Page 4 of 6

Text produced for: User Manual EP1030/1030F first page in draft i

EP1030/1030F Table of Contents 4 Rev. 1.x/22.05.02

4.4 Default Manual Exposure Level Adjustment . . .34

4.5 Default Auto Exposure Level Adjustment . . . . .36

4.6 TotalCountFunction......................38

TotalCount.....................................38

IUCount.......................................38

4.6.1 Counter Display . ...................................38

CheckingTotalCopies/IUCount.....................38

5 Error Messages and Indicators

5.1 IdentifyingandCorrectingProblems.........40

5.2 PC-Display ..............................41

ReplenishingPaper...............................41

RemovingaPaperMisfeed.........................42

5.3 A AddTonerIndicator.....................43

ReplacingtheTonerCartridge......................43

Toner Replenishing...............................45

5.4 B ImagingUnitIndicator...................46

HandlingCautionsforImagingUnit ..................46

RemovingtheImagingUnit.........................47

Installing the Imaging Unit..........................48

5.5 E-Display................................53

ResettingtheCopier..............................53

Before Calling Your Service Representative. . ..........53

5.6 J-Display................................55

Paper Misfeed...................................55

5.6.1 RemovingaPaperMisfeed............................56

J2/J3-Copier....................................56

J8 - Semi-automatic Document Handler (SDH) . . . ......58

5.7 C-Display................................60

ResettingtheCopier..............................60

Before Calling Your Service Representative. . ..........60

right

Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\FRONT.GB Page 5 of 6

Text produced for: User Manual EP1030/1030F first page in draft i

Rev. 1.x/22.05.02 Table of Contents 5 EP1030/1030F

6 Troubleshooting

6.1 WhenThisTypeofCopyisProduced........62

6.2 CopierDoesNotWorkProperly.............64

7 Miscellaneous

7.1 CopierSpecifications.....................64

7.2 DailyMaintenance........................66

7.2.1 Cleaning: Before cleaning, always make sure the

Main Switch for the copier has been turned off. ........... 66

OuterCover.................................... 66

ControlPanel................................... 66

OriginalCoverPad............................... 66

OriginalGlass................................... 67

InsideofFrontDoor.............................. 67

SDHPad ...................................... 67

7.3 PaperSize ..............................68

7.4 Index...................................74

left

Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\FRONT.GB Page 6 of 6

Text produced for: User Manual EP1030/1030F first page in draft i

EP1030/1030F Table of Contents 6 Rev. 1.x/22.05.02

right

Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER1.GB Page 1 of 6

Text produced for: User Manual EP1030/1030F first page in draft 1

Rev. 1.x/22.05.02 1 EP1030/EP1030F

Chapter 1

1 Safety Notes

O Thischapterexplains about the operating environment,conditions

and restrictions.

1 Safety Notes

1.1 Installing the Copier .......................2

1.1.1 InstallationSite ..................................... 2

1.1.2 PowerSource ...................................... 2

1.1.3 Space Requirements ................................. 3

1.2 Precautions for Use .......................4

1.2.1 OperatingEnvironment............................... 4

1.2.2 Using the Copier Properly . ............................ 4

1.2.3 Moving............................................ 5

1.2.4 CareofCopierSupplies............................... 5

left

Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER1.GB Page 2 of 6

Text produced for: User Manual EP1030/1030F first page in draft 1

1.1 Installing the Copier

EP1030/EP1030F 2 Rev. 1.x/22.05.02

1.1 Installing the Copier

1.1.1 Installation Site

To ensure utmost safety and prevent possible malfunctions of the copier,

install it in a location which meets the following requirements.

A place away from a curtain or the like that may catch fire and burn

easily.

An area where there is no possibility of being splashed with water or

other types of liquid.

An area free from direct sunlight.

A place out of the direct air stream of an air conditioner, heater, or

ventilator.

A well-ventilated place.

A dry place.

A dust-free location.

An area not subject to undue vibration.

A stable and level location.

A place where ammonia or other organic gas is not generated.

Aplacewhichdoes notputthe operatorin thedirectstreamofexhaust

from the copier.

A place which is not near any kind of heating device.

1.1.2 Power Source

The power source voltage requirements are as follows.

Use a power source with little voltage fluctuation.

Voltage Fluctuation: Within ±10%

Frequency Fluctuation: Within ±0.3%

right

Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER1.GB Page 3 of 6

Text produced for: User Manual EP1030/1030F first page in draft 1

1.1 Installing the Copier

Rev. 1.x/22.05.02 3 EP1030/EP1030F

Chapter 1

1.1.3 Space Requirements

To ensure easy copier operation, supply replacements and service

maintenance, adhere to the recommended space requirements detailed

below.

* Be sure to allow a clearance of 150mm (6 inch) or more at the back of

the copier as there is a ventilation duct.

EP1030F (with Semi-automatic Document Handler)

EP 1030 (with Original Cover)

867 (34 1/4)

660 (26)

559 (22)

207

101 (4)

237

(8 1/4)

(9 1/4)

804 (31 3/4)

304 (12) 500 (19 3/4)

694 (27 1/4)

357 (14)

281 (11)

49 (2)

87°

Unit: mm (inch)

867 (34 1/4)

660 (26)

559 (22)

207

101 (4)

237

(8 1/4)

(9 1/4)

849 (33 1/2)

304 (12) 545 (21 1/2)

647 (25 1/2)

303 (12)

281 (11)

94(3 3/4)

105°

Unit: mm (inch)

left

Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER1.GB Page 4 of 6

Text produced for: User Manual EP1030/1030F first page in draft 1

1.2 Precautions for Use

EP1030/EP1030F 4 Rev. 1.x/22.05.02

1.2 Precautions for Use

1.2.1 Operating Environment

The operating environmental requirements for the copier are as follows.

Temperature:

10°C to 30°C (50°F to 86°F) with a fluctuation of 10°C (50°F)per hour.

Humidity:

15% to 85% with a fluctuation of 20% per hour.

1.2.2 Using the Copier Properly

To ensure the optimum performance of the copier, follow the precautions

listed below.

NEVER place a heavy object on the copier or subject the copier to

shocks.

NEVER open any doors, or turn OFF the copier while the copier is

making copies.

NEVER bring any magnetized object or use flammable sprays near

the copier.

ALWAYS insert the power plug all the way into the outlet.

ALWAYS make sure that the outlet is visible, clear of the copier or

copier cabinet.

ALWAYS provide good ventilation when making a large number of

continuous copies.

NOTE

Locate the Copier in a Well Ventilated Room

A negligibleamountof ozone is generated duringnormal operation of this

copier. An unpleasantodor may, however,be created in poorly ventilated

roomsduringextensivecopieroperations.Foracomfortable,healthy,and

safe operating environment, it is recommended that the room be well

ventilated.

REMARQUE

Placer le copieur dans une pièce largement ventilée

Une quantité d'ozone négligable est dégagée pendant le fonctionnement

du copieur quand celui-ci est utilisé normalement. Cependant, une odeur

désagréable peut être ressentie dans les pièces dont l'aération est

insuffisante et lorsque une utilisation prolongée du copieur est effectuée.

Pouravoirlacertitudedetravaillerdansunenvironnementréunissantdes

conditions de confort, santé et de sécurité, il est préférable de bien aérer

la pièce ou se trouve le copieur.

right

Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER1.GB Page 5 of 6

Text produced for: User Manual EP1030/1030F first page in draft 1

1.2 Precautions for Use

Rev. 1.x/22.05.02 5 EP1030/EP1030F

Chapter 1

1.2.3 Moving

If you need to transport the copier over a long distance, consult your

Technical Representative.

1.2.4 Care of Copier Supplies

Use the following precautions when handling the copier supplies (toner,

paper, etc.)

Store the paper, toner, and other supplies in a place free from direct

sunlight and away from any heating apparatus. Keep them in a dry,

clean environment.

Storepaper, which has been removed from its wrapper but not loaded

into the drawer, in a sealed plastic bag in a cool, dark place.

Keep supplies out of the reach of children.

If your hands become soiled with toner, wash them with soap and

water immediately.

left

Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER1.GB Page 6 of 6

Text produced for: User Manual EP1030/1030F first page in draft 1

1.2 Precautions for Use

EP1030/EP1030F 6 Rev. 1.x/22.05.02

right

Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER2.GB Page 7 of 14

Text produced for: User Manual EP1030/1030F first page in draft 5

Rev. 1.x/22.05.02 7 EP1030/EP1030F

Chapter 2

2 Before Making Copies

O This chapter gives you a brief description of the system and

preliminary information about the different parts of the system.

2 Before Making Copies

2.1 CopierPartsandtheirOperation.............8

OutsidetheCopier................................ 8

InsidetheCopier................................. 9

Semi-automaticDocumentHandler(SDH) ............ 10

2.2 ControlPanelanditsOperation ............11

2.2.1 ControlPanel...................................... 11

2.2.2 ServiceIndicators .................................. 11

2.3 TurningON/OFFandInitialMode ...........12

2.3.1 TurningONandOFF................................ 12

2.3.2 WhentheCopierisTurnedON........................ 12

2.3.3 InitalMode........................................ 12

2.4 ConvenientFunctions.....................13

Clear/Stop..................................... 13

AutoReset..................................... 13

AutoPowerOff.................................. 13

left

Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER2.GB Page 8 of 14

Text produced for: User Manual EP1030/1030F first page in draft 5

2.1 Copier Parts and their Operation

EP1030/EP1030F 8 Rev. 1.x/22.05.02

2.1 Copier Parts and their Operation

Outside the Copier

Pos. Specification Description

1 Copy Tray Holds the copies fed out of the copier.

2 Main Switch Use to turn on and off the copier.

(See page 12.)

3 Control Panel Use to make various copy job settings and

start a copy cycle.(See page 11.)

4 Front Door Open only for the following:

Replenish toner (See page 43.)

Remove a paper misfeed (See page 56.)

5 Manual Bypass Tray Single sheet of plain paper, thick paper,

transparencies and other special materials

can be placed here. (See page 24.)

6 Right Door Open to clear a paper misfeed.

7 Drawer Holds up to 250 sheets of copy paper.

1

2

3

4

5

6

7

right

Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER2.GB Page 9 of 14

Text produced for: User Manual EP1030/1030F first page in draft 5

2.1 Copier Parts and their Operation

Rev. 1.x/22.05.02 9 EP1030/EP1030F

Chapter 2

Inside the Copier

Pos. Specification Description

1 Imaging Unit Lock

Release Button

Use when removing the imaging unit.

(See page 47.)

2 Fusing Unit Cover Hold onto this cover when lifting the Upper

Unit of the Fusing Unit.

3 Lock Release Lever Turn clockwise to swing up the Upper Unit of

the copier to clear a paper misfeed.

1

2

3

left

Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER2.GB Page 10 of 14

Text produced for: User Manual EP1030/1030F first page in draft 5

2.1 Copier Parts and their Operation

EP1030/EP1030F 10 Rev. 1.x/22.05.02

Semi-automatic Document Handler (SDH)

NOTE

EP1030 has an original cover.

EP1030F has an SDH for original handling.

Pos. Specification Description

1 Document Guide

Plates

Adjust to the size of the original.

2 Misfeed Removal

Guide

Open to clear a paper misfeed.

3 Document Exit Tray Receives originals that are automatically

ejected after copying.

4 Document Feed Tray Load the originals face down on this tray.

(See page 20.)

5 Document Feed Tray

Extender

Can be pulled out when using large size

originals.

6 Misfeed Removal

Knob

Turn to remove an original misfeed.

1

2

3

4

5

6

right

Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER2.GB Page 11 of 14

Text produced for: User Manual EP1030/1030F first page in draft 5

2.2 Control Panel and its Operation

Rev. 1.x/22.05.02 11 EP1030/EP1030F

Chapter 2

2.2 Control Panel and its Operation

2.2.1 Control Panel

2.2.2 Service Indicators

Pos. Specification Description

1 Display Panel Alphanumeric display indicating the number

of copies and other information.

(See page 21.)

2 Clear/Stop Key Returns the copy setting to one (1). Stops

the copying operation.

3 Start Key Starts the copying operation

4 Copy Quantity Keys Used to set the number of copies to be

made. The number in the display panel will

increase by one each time the one (1) key is

pressedandincreasebyteneachtimethe

ten (10) key is pressed. (See page 21.)

5 Exposure Control

Keys

46:

Controls the density of the copy image.

5:

For selecting the Auto Exposure/Manual

Exposure Mode. (See page 22.)

Pos. Specification Description

1 Add Toner Indicator A

Indicates that toner is running out.

(See page 43.)

2 Imaging Unit

Indicator

B

Indicates when the imaging unit needs

replacement. (See page 46.)

123

45

left

Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER2.GB Page 12 of 14

Text produced for: User Manual EP1030/1030F first page in draft 5

2.3 Turning ON/OFF and Initial Mode

EP1030/EP1030F 12 Rev. 1.x/22.05.02

2.3 Turning ON/OFF and Initial Mode

2.3.1 Turning ON and OFF

1

Turning Copier ON. Press the

Main Switch to the e (ON)

position.

Turning Copier OFF. Press the

Main Switch to the d (OFF)

position.

NOTE

If the copier has notbeen used inthe past30 minutes,the Auto PowerOff

function turns the copier off. (See page 13.)

2.3.2 When the Copier is Turned ON

The LED in the start key will remain off while the copier makes

preparations for copying. After approximately 10 seconds, the LED in the

start key will come on and copying can be started. At this time, if an

original is placed in the Semi-automatic Document Handler (SDH), the

copier will be set into SDH mode copying.

2.3.3 Inital Mode

The copy mode will be displayed on the control panel when the Main

Switch is turned on. This is called the initial mode. This is the mode that

forms the basis for all control operations.

Number of Copies: 1

Copy Density: Auto Exposure

Page is loading ...

Minolta EP1030, EP1030F User manual

Related papers

Other documents