Canon FC-128 User manual

Canon
Brand
Canon
Model
FC-128
Type
User manual

This manual is also suitable for

Please read this manual before
operating this equipment.
1
Open the copy tray and the multi-stack tray (
single-sheet feed) fully.
2
Slide the platen to the left until the
mark is
exposed.
3
Press the top cover release button.
4
Open the top cover so that it stands upright.
5
Remove the protective material completely.
6
Grip the end of the used cartridge and pull it out from
the copier.
P
7
Rock the cartridge several times 90° to the right and
left to evenly distribute the toner throughout the
cartridge.
8
Peel the sealing tape grip from the end of the
cartridge. Grasp the grip and pull the sealing tape
out in the direction of the arrow mark away from the
cartridge.
Remove the cartridge tag and the string from the
cartridge.
9
Hold the cartridge so that the side with the written
instructions is facing to the left. Then, carefully insert
the cartridge into the copier as far as it will go.
10
Close the top cover by pressing down firmly on the
button.
REQUEST:
Close the top cover by pressing down firmly on the
button.
11
Return the platen to the centre position.
Adjusting the Copy Exposure
The copier comes with an automatic exposure
control mode that automatically adjusts the copy
exposure to the most appropriate level, but if the
entire image is light or dark do the following.
(See “Adjusting the Copy Exposure”, on p. 29.)
To make darker copies, move the
switch upward
To make lighter copies, move the
switch downward
Darker
o
Lighter
FA7-4332-010
XX2003XX
© CANON INC. 2003
PRINTED IN THAILAND
FC108_FC128_FC298_SS_ENG.fm Page 1 Mond
ay, October 27, 2003 1:13 PM
  • Page 1 1

Canon FC-128 User manual

Canon
Brand
Canon
Model
FC-128
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents