Outback Power Systems Automatic Generator Start (AGS) is a device that allows you to automatically start and stop a generator based on various conditions. The AGS can be programmed to start the generator when the battery voltage drops below a certain level, when the load on the inverter exceeds a certain amount, or at a specified time of day. The AGS can also be used to exercise the generator periodically to keep it from being inactive.
The AGS is compatible with most generators with electric start and automatic choke. It can be used with two-wire-start generators, which have a simple on-off switch, or three-wire-start generators, which require separate controls for starting and running. If you have a three-wire-start generator, you can adapt it into a two-wire-start generator using an adapter from Atkinson Electronics.
Outback Power Systems Automatic Generator Start (AGS) is a device that allows you to automatically start and stop a generator based on various conditions. The AGS can be programmed to start the generator when the battery voltage drops below a certain level, when the load on the inverter exceeds a certain amount, or at a specified time of day. The AGS can also be used to exercise the generator periodically to keep it from being inactive.
The AGS is compatible with most generators with electric start and automatic choke. It can be used with two-wire-start generators, which have a simple on-off switch, or three-wire-start generators, which require separate controls for starting and running. If you have a three-wire-start generator, you can adapt it into a two-wire-start generator using an adapter from Atkinson Electronics.
Outback Power Systems Automatic Generator Start (AGS) is a device that allows you to automatically start and stop a generator based on various conditions. The AGS can be programmed to start the generator when the battery voltage drops below a certain level, when the load on the inverter exceeds a certain amount, or at a specified time of day. The AGS can also be used to exercise the generator periodically to keep it from being inactive.
The AGS is compatible with most generators with electric start and automatic choke. It can be used with two-wire-start generators, which have a simple on-off switch, or three-wire-start generators, which require separate controls for starting and running. If you have a three-wire-start generator, you can adapt it into a two-wire-start generator using an adapter from Atkinson Electronics.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI