Model: TD100, TD100V2
Features
No assembly required1.
3/5/2015
ASSEMBLY INSTRUCTIONS
12/13/2012
ASSEMBLY INSTRUCTIONS
__(1) Hardware pack
(4) 3 1/4" Chair bolts.
Models: RT248, RCT248,
HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED
Qty. Description
(8) 2 1/2" screws.
TOOLS NEEDED
RRT248, RBT248
Step 2
Lay the table top on a flat surface.
4mm HEX KEY: INCLUDED
Attach braces to leg assemblies using
Step 1
(4) 3" screws.
Attach feet to legs using
Attach the leg assemblies to the table top using
Step 3
Set table upright and tighten all bolts
__(1) Table top
__(4) Leg
__(2) Foot
__(2) Brace
A
A - .27 X 2-1/2 SOCKET WAFER A
8
C
4mm HEX KEY, ALLEN, T-HANDLE
(INCLUDED)
A
B
B
Removable table plug
included in table
FINE THREAD
4
C - 1/4-20 X 3-1/4 WAFER SHCS
4
B - .27 X 3 SOCKET WAFER A
To view our full warranty, please visit the warranty page on our website at
polywoodinc.com/resources.
If you have questions or concerns regarding assembly instructions or missing parts,
please contact us at (877) 457-3284 or email suppor[email protected]
youtube.com/polywood@POLYWOODINCPOLYWOOD POLYWOODPOLY-WORLD
Blog
To view our full warranty, please visit the warranty page on our website at
polywoodinc.com/resources.
If you have questions or concerns regarding assembly instructions or missing parts,
please contact us at (877) 457-3284 or email suppor[email protected]
youtube.com/polywood@POLYWOODINCPOLYWOOD POLYWOODPOLY-WORLD
Blog
/
