ASSEMBLY INSTRUCTIONS
READ BEFORE ASSEMBLY TRACK INSTALLATION
PRODUCT ATTRIBUTES
RECOMMENDATIONS
Handle with care. Do not drop, handle
roughly, or overtighten screws as this
will cause damage to the wood.
We recommend using two people to
assemble, move or lift the cabinet.
The production lot number on the last
page of the installation manual will be
needed for warranty issues.
Please contact customer service team
if you have any questions.
Use a dry cloth to clean.
Avoid getting the door wet.
Do not paint the door.
barn door
MATERIAL
Our products are made with melamine
particleboard that gives greater resistance
to moisture, scratches and extreme
temperatures.
Edge band on every exposed edge.
Benets of particle board vs plywood.
Better nish quality.
The decorative paper does not fall off.
The track system must be installed on the
top of the Door no more than 7-1/2“ (190
mm) from the top Edge. It has an internal
reinforcement piece that supports the
hardware.
OPTIONAL HANDLE
If you want to install handles, the structure
has internal supports for both openings
direction.
Dimensions of support 10 5/8” x 6 1/8”
(270 mm x 155 mm), begining on 28 3/16”
(716 mm) from the bottom side.