Futaba R162JE User manual

Brand: Futaba

Model: R162JE

Type: User manual

©FUTABA CORPORATION 2008,9

1M23N17410

R162JE

OFF

Small size, Light weight

2-Channel AM Receiver w/BEC

Futaba R162JE 2-Channel AM receiver with BEC is

packed in this set.

*Speciﬁcations are subject to change without prior notice.

R162JE RATINGS

Output/Battery Connector

"2": Throttle(CH2)

"1": Steering(CH1)

"B": Power Supply

Antenna

• Receiving frequency:

(Refer to the package.)

• Intermediate freq.: 455kHz

• Power supply:

4.8-8.4V(Built-in BEC)

• Current drain: Approx. 6mA

• Size: 28.6x42.9x15.3mm

(1.13x1.69x0.60in.)

• Weight: 14g (0.49oz.)

Crystal

R162JE

(CH2)

(CH1)

(CH2)

(CH1)

(B)

Connects

to Motor

Connects

to battery

Power Switch

Steering Servo

Throttle Servo

E.S.C.

R162JE

Power Switch

To Battery

Connect the battery in accordance with instructions provided with

model you are installing this system in.

Use the R2-BSS-N battery holder to match your application.

If your model has a mechanical type speed control (servo driven for

electric powered models) inspect this component for a power supply

regulator or voltage dropping Diode. These device's will cause a voltage

drop to the receiver. Be sure to remove them prior to installation in your

model.

•

Receiver and Servo Connections for EP car

Receiver and Servo Connections for GP car

Futaba R162JE User manual

Futaba R162JE User manual

Related papers

Other documents