Samsung SI-L8R20115CEU User manual

Brand: Samsung

Model: SI-L8R20115CEU

Type: User manual

User Manual

T8 LED Lamp

Always have a qualied electrician to do your electrical work!

Switch o power before starting the installation!

Instructions for mounting:

Schematic steps for removing a uorescent lamp and inserting a double-capped LED lamp

Installation instructions

This lamp is designed for general lighting service (excluding eg.explosive atmospheres)

This LED tube is compatible with Magnetic ballast only.

This lamp is not suitable for use in emergency light ttings designed for double-capped uorescent lamps.

Do not use this product in outdoor areas.

For dry locations only - not for use where exposed to the weather.

※ The overall energy eciency and light distribution of installed lamps are determined by the design of the installation.

※ Existing power factor compensation capacitors worsen the power factor, but can remain within the light tting.

Notice:

Environment: 20°C to +30°C ,<95% humidity ,no guarantee for water proof

1500mm L-Tube suitable for G13 Base Socket

Replacement: 1500mm 20.0W/26.0W replace uorescent lamp 58.0W

Packing details: LED tube, LED Starter, User manual

Any modication of the light tting when installing the LED lamps is not permitted.

Please do not install this Magnetic ballast compatible LED tube using a glow starter.

Please do not install this Magnetic ballast compatible LED tube using a direct connection to an AC source.

Please do not install this Magnetic ballast compatible LED tube using another independent LED driver.

Please do not replace with a dierent type of LED tube! Risk of electrical shock!

Please use only for a single lamp (do not install over a double lamp and above).

Series connection is not permitted when installing this product.

Do not use this product in outdoor areas.

For dry locations only - not for use where exposed to the weather.

Turn o power before installing or replacing lamp.

Do not touch this product with wet hands.

Do not look directly at the lamp when being used.

Do not use in totally enclosed xtures.

Do not disassemble, repair or alter in any way.

Warning:

(1) Switch o electricity.

(2) and (3) Remove the conventional lamp.

(4) and (5) Replace the old starter with the LED tube starter.

(6) Insert the LED lamp into the lamp holder.

(7) Secure it in position by turning the lamp 90˚.

(8) Switch on electricity.

p.f.correction capacitor

October 2013 – Version 2

The installation date must be documented to make a warranty claim.

The Samsung Electronics guarantees a product life-time of 3 years after the purchase date.

If you do not have a receipt (or invoice) the warranty starts from the production date.

The Samsung Electronics guarantee does not apply to failures caused by abnormal use.

In such circumstances all service and repair costs must be paid for by the customer.

The LED tube starter is a consumable, which can be purchased from your dealer.

xy denotation : xy can be A-Z, standing for national/regional abbreviations eg. EU, CN, etc.

EU – European Union

Warranty:

Ballast Information:(One lamp)

SI-L8R20115Cxy

SI-L8T20115Cxy

SI-L8V20115Cxy

SI-L8R26115Cxy

SI-L8T26115Cxy

SI-L8V26115Cxy

D28 x L1514.2mm max

5000K

Power consumption Size CCTModel Name

4000K

3000K

20.0W

26.0W

5000K

4000K

3000K

Maker Model Name

Helvar

Vossloh & Schwabe

L58A-T230

L58 I.116

For Germany, Austria and Switzerland

Samsung SI-L8R20115CEU User manual

Samsung SI-L8R20115CEU User manual

Samsung SI-L8R20115CEU User manual

Related papers

Other documents