2. American Standard
  3. 1660.711.002

American Standard 1660.711.002, 1660.718.002, 1660711.002 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the American Standard 1660.711.002 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Installation
Instructions
M965035
1660 SERIES
Thank you for selecting American-Standard...the
benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.
Certified to comply with ANSI A112.18.1
Recommended Tools
1
1
1
2
2
2
3
3
2
3 4
Use the HEX WRENCH (1) supplied to loosen LOCK
RING SET SCREW (2). Remove LOCK RING (3) FROM
SHOWER HEAD (4).
1
REMOVE LOCK RING (1660 SERIES)
Apply TEFLON TAPE (1) or sealant to threads of SHOWER ARM (2).
Slide the small end of the LOCK RING (3) onto SHOWER ARM (4).
2
SEAL SHOWER ELBOW
Teflon Tape
Adjustable Wrench
Adjustable Wrench
Tighten SHOWER HEAD (1)
to SHOWER ARM (2) with
adjustable wrench. FIG. 1.
Turn water on to shower and check for leaks.
Slide the LOCK RING (3) over the shower
connector aligning the set screw with
connector hole. FIG. 1.
Tighten the set screw with hex wrench until
it’s tight against the SHOWER ARM (2). FIG. 2.
3
INSTALL SHOWER HEAD
SMALL END
SET SCREW
CONNECTOR
HOLE
SET SCREW
HEX WRENCH
FIG.1 FIG.2
FloWise
™
Vandal Proof Showerheads
/