American Standard 1660.711.002 Installation guide

American Standard
Brand
American Standard
Model
1660.711.002
Type
Installation guide

This manual is also suitable for

Installation
Instructions
M965035
1660 SERIES
Thank you for selecting American-Standard...the
benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.
Certified to comply with ANSI A112.18.1
Recommended Tools
1
1
1
2
2
2
3
3
2
3 4
Use the HEX WRENCH (1) supplied to loosen LOCK
RING SET SCREW (2). Remove LOCK RING (3) FROM
SHOWER HEAD (4).
1
REMOVE LOCK RING (1660 SERIES)
Apply TEFLON TAPE (1) or sealant to threads of SHOWER ARM (2).
Slide the small end of the LOCK RING (3) onto SHOWER ARM (4).
2
SEAL SHOWER ELBOW
Teflon Tape
Adjustable Wrench
Adjustable Wrench
Tighten SHOWER HEAD (1)
to SHOWER ARM (2) with
adjustable wrench. FIG. 1.
Turn water on to shower and check for leaks.
Slide the LOCK RING (3) over the shower
connector aligning the set screw with
connector hole. FIG. 1.
Tighten the set screw with hex wrench until
it’s tight against the SHOWER ARM (2). FIG. 2.
3
INSTALL SHOWER HEAD
SMALL END
SET SCREW
CONNECTOR
HOLE
SET SCREW
HEX WRENCH
FIG.1 FIG.2
FloWise
™
Vandal Proof Showerheads
  • Page 1 1

American Standard 1660.711.002 Installation guide

American Standard
Brand
American Standard
Model
1660.711.002
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents