Page 3
FEATURES
Rechargeablebatteryincluded
Poweredbyhighqualitycrystallinesolarcells
Aluminumconstructionmakesitrustfree
4NaturalWhiteLED’s
Waterproofdesignprovideslongerlifeinallweatherconditions
Lightautomaticallyturnsonatdusk
PARTSLIST
Anchor(withpad,springpad,
andnut)
INSTALLATIONANDUSE
PostLampMounting:
1) Carefullyremovethesolarlightandallthefittingsoutofthebox.
2) Find a suitable place to installthe lamp. Thereare severalwaysto securethe
postlamp.Youmaywishtosettheanchorboltsincement,orsecurethelamp
basetoaheavyobject.Besuretheareaisflatsothelampwillstandstraight.
3) Markthethreeholesfromthelampbaseonthegroundormountsurface.
4) Using an electric drill, drill holes in the mount surface where the marks were
made.
5) Place the anchor in the holes with the threaded ends out. Release the nut, spring pad, and pad from the
anchorandputthelampgroundbaseontotheanchor,theanchorshouldbethroughtheholes.Reinstallthe
pad,springpadandthenthenut.Tightenwithawrench.
6) Makesurethelampbaseisstablebeforeinstallingthelamppoles.
7) Installthelamppoleontothelampbasebysupplied3screwsandLshapewrench.
8) Installtherestoflamppolesaccordingtosizebytwistingclockwise.
9) Attachlampheadtolampheadadapter.
10) Fixthelampontothepolebytwistinginaclockwisedirection.
LampWallMounting:
1) Useanelectricdrilltomaketwoholesinthewall.
2) Placeprovidedanchorsintoholeswiththethreadedendsout.
3) Placewallmountinlinewiththeholesandsecureitwiththepad,springpad,andnut.Tightenwithawrench.
4) Makesurethewallmountisstablebeforeinstallingthelamphead.
5) Screwlampheadontowallmount.
LampPillarMounting:
1) Useanelectricdrilltomaketwoholesintodesiredsurface.
2) Placeprovidedanchorsintoholeswiththethreadedendsout.
3) Placepillarmountinlinewiththeholesandsecureitwiththepad,springpad,andnut.Tightenwithawrench.
6) Makesurethepillarmountisstablebeforeinstallingthelamphead.
4) Insertthescrewfromtheunderneathofthelampheadintothepillarmountandfastenwithsuppliednut.
LampPostMounting:
1) Insertthescrewfromtheunderneathofthelampheadintothepostmountandfastenwithsuppliednut.
2) Placethepostmountontoanexisting3”postusingthe3screwsprovided.
Diagramscontinuedonnextpage.
Mounts(Wall,Pillar,Post)
Screws(withPostMount)
Anchor(withpad,springpad,
andnut)