2. Zebra
  3. ST6026

Zebra ST6026 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Zebra ST6026 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Page 1 of 2 Part No. 1005719 Revision A
September 27, 2010
Installation Instruction for ST6026 Standard Handstrap
1. Installation of the Standard Handstrap
HANDSTRAP INSTALLATION
ASSEMBLE THE SCREWS M3X6MM TO OMNII
HANDHELD. TIGHTEN TO 5.0 ±0.5 IN-LBS OR ONE-
QUARTER TURN BEYOND FINGER TIGHT. DO NOT
OVERTIGHTEN. PULL DOWN STRAP AND HOOK
PLASTIC CLIP INTO SLOT AT BOTTOM AS
SHOWN.
Page 2 of 2 Part No. 1005719 Revision A
STEP 1.
COMPANY HEADQUARTERS AND CANADIAN SERVICE CENTRE
PSION TEKLOGIX
2100 Meadowvale Boulevard, Mississauga
Ontario, Canada L5N 7J9
Tel: +1 905 813 9900
Fax: +1 905 812 6300
E-mail: salescdn@psion.com
STEP 3.
STYLUS TETHER INSTALLATION ON STANDARD HANDSTRAP
THREAD TETHER
LOOP THROUGH 2
ND
EYELET DOWN ON
HANDSTRAP
STEP 2.
PUSH STYLUS
THROUGH TETHER
LOOP
PULL REST OF
TETHER THROUGH
THE LOOP UNTIL
THE KNOT IS SNUG
/