RetroSound Detroit Quick start guide

Radio Face Mounting Screws

(These are very small and are

located in the hardware bag)

Detroit RetroRadio™ Face

Connect the ribbon cable included with the radio body to the Detroit RetroRadio ™ face.

(Do not force the connector)

Two Shafts

Shaft Nuts and Washers

Attach the Detroit RetroRadio ™ face to the radio body using the radio face mounting screws

included. (These screws are very small. Be careful not to lose them)

WHAT’S IN THE BOX

CONNECTING THE FACE TO THE BODY

The FORD Bar™ on your radio functions as a seek on

SirusXM or tuner mode and will skip tracks, rewind and

fast-forward in USB or Bluetooth

playback modes.

Complete the installation as described in the user’s manual included in the Motor Box.

www.retromanufacturing.com

MODERN SOUND FOR YOUR CLASSIC

702.483.2222

RADIO FACE QUICK START GUIDE

InfiniMount™ Brackets

(Found within your Motor box)

Download PDF