RetroSound Daytona Quick start guide

RetroSound
Brand
RetroSound
Model
Daytona
Type
Quick start guide

RetroSound Daytona is a modern digital radio with a retro look that seamlessly integrates with your classic car's interior. It features:

  • Multiple source options: Listen to AM/FM radio, connect your phone via Bluetooth, or plug in a USB drive or auxiliary device.
  • Customizable presets: Save your favorite stations for easy access with the 5 preset buttons.
  • Adjustable EQ settings: Tailor the sound to your preferences with bass, middle, and treble adjustments.
  • Digital clock display: Keep track of time with the built-in clock.
  • Multiple display color options: Choose from a variety of colors to match your car's interior.

RetroSound Daytona is a modern digital radio with a retro look that seamlessly integrates with your classic car's interior. It features:

  • Multiple source options: Listen to AM/FM radio, connect your phone via Bluetooth, or plug in a USB drive or auxiliary device.
  • Customizable presets: Save your favorite stations for easy access with the 5 preset buttons.
  • Adjustable EQ settings: Tailor the sound to your preferences with bass, middle, and treble adjustments.
  • Digital clock display: Keep track of time with the built-in clock.
  • Multiple display color options: Choose from a variety of colors to match your car's interior.
RADIO FACE QUICK START GUIDE
Daytona Radio Face
Shown above: RetroRadio B.
(The face in your box may look different than the photo above)
Connect the ribbon cable included with the radio body to the radio face.
(Do not force the connector)
Two Shafts
Shaft Nuts and Washers
Radio Face Mounting Screws
(These are very small and are located in the hardware bag)
Attach the radio face to the radio body using the radio face mounting screws included.
(These screws are very small. Be careful not to lose them)
Complete the installation as described in the user’s manual included in the Motor Box.
WHAT’S IN THE BOX CONNECTING THE FACE TO THE BODY
www.retromanufacturing.com
MODERN SOUND FOR YOUR CLASSIC
702.483.2222
Daytona
BASIC OPERATING GUIDE
Refer to the Userʼs Manual in your Motor box for more comprehensive instructions.
Control Layout Basic Operation
#3 #4#1 #2 #5 #6 #7 #8 #9
1. Left-Front Knob
2. Left-Rear Knob
3. Preset Button
4. Preset Button
5. Preset Button
6. Preset Button
7. Preset Button
8. Right-Front Knob
9. Right-Rear Knob
Radio Presets
Setting Radio Presets
Buttons #3 - #7 are your radio presets. To set
a preset, simply tune to the station you
want to set, then press and hold the preset
button (#3 - #7) for two seconds.
Recalling Radio Presets
To recall a preset, simply press the preset
button (#3 - #7).
Power On/Off
Press the Left-Front Knob (#1) to power the unit on.
Press and hold the Left-Front Knob (#1) to power the unit off.
Volume
Rotate the Left-Front Knob (#1) to change the volume.
Changing Source Modes
Rotate the Left-Rear Knob (#2) clockwise to cycle through the source modes.
Tune
Rotate the Right-Front Knob (#8) to scroll through the stations.
Mute On/Off
Press the Right-Front Knob (#8) to mute and unmute.
Equalizer (EQ)
Press the Left-Front Knob (#1) to enter the Tone Control sub-menu. Repeatedly press the
knob (#1) to click through the menu options until you see BASS, MIDDLE or TREBLE. To
change the EQ, navigate to the option you want to adjust, then rotate the Left-Front
Knob (#1). Press the knob (#1) to move onto the next menu item, and repeat to adjust.
Setting the Clock
Press and hold the Right-Front Knob (#8) to enter the System Settings sub-menu. Rotate
the knob (#8) to cycle through the choices. Highlight CLK, then press the knob (#8) to
select. Then rotate to adjust hours. Press the knob (#8) again to move onto minutes.
Rotate to adjust.
Display Color
Press and hold the Right-Front Knob (#8) to enter the System Settings sub-menu. Rotate
the knob (#8) to cycle through the choices. Highlight SCAN, then press the knob (#8) to
cycle through the colors.
Beep On/Off
Press and hold the Right-Front Knob (#8) to enter the System Settings sub-menu. Rotate
the knob (#8) to cycle through the choices. Highlight BEEP, then press the knob (#8) to
toggle the beep on or off.
www.retromanufacturing.com
MODERN SOUND FOR YOUR CLASSIC
Phone: 702.483.2222
Daytona
  • Page 1 1
  • Page 2 2

RetroSound Daytona Quick start guide

RetroSound
Brand
RetroSound
Model
Daytona
Type
Quick start guide

RetroSound Daytona is a modern digital radio with a retro look that seamlessly integrates with your classic car's interior. It features:

  • Multiple source options: Listen to AM/FM radio, connect your phone via Bluetooth, or plug in a USB drive or auxiliary device.
  • Customizable presets: Save your favorite stations for easy access with the 5 preset buttons.
  • Adjustable EQ settings: Tailor the sound to your preferences with bass, middle, and treble adjustments.
  • Digital clock display: Keep track of time with the built-in clock.
  • Multiple display color options: Choose from a variety of colors to match your car's interior.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents