Unbranded R6GI Installation guide

R6GI
Unbranded
Brand
Unbranded
Model
R6GI
Type
Installation guide

This manual is also suitable for

INSTALLATION INSTRUCTIONS
CONCENTRIC DIFFUSER
INSTALLATION
INSTRUCTIONS
FORM# 597A-0711 (Replaces 597A- 1004)
UNIT
FILTER
PLENUM
CONTROL MOTOR
ECONOMIZER
FRESH AIR
EXHAUST AIR
ROOF CURB
FLEXI BLE
DUCT
CON CEN TRIC
DIF FUSER BOX
INSTALLATION INSTRUCTIONS
CONCENTRIC DIFFUSER
INSTALLATION
INSTRUCTIONS
FLUSH MOUNT
CON CEN TRIC DIF FUSER SYS TEMS
Flush Mount concentric diffuser systems, are designed
to provide a single point air distribution system. The
systems may be used with either a “T-Bar ceiling or a
plaster ceiling.
Standard features include:
1. All aluminum diffuser with aluminum return air
eggcrate.
2. Built-in Anti-Sweat gasket.
3. Molded Fiberglass Transition (through five tons).
4. Built-in hanging supports.
5. Diffuser box constructed of fiberglass ductboard
(through 7.5 tons) or sheet metal.
SIDE DIS CHARGE
CON CEN TRIC DIF FUSER SYS TEM
Side Discharge concentric diffuser systems are
designed to provide a single point air distribution system
with the added benefit of having directional air control.
The system may be used with either a “T-Bar” ceiling or a
plaster ceiling.
Standard features include:
1. All aluminum diffuser with aluminum return air
eggcrate.
2. Double deflection diffuser with the blades
secured by spring steel.
3. Built-in Anti-Sweat gasket.
4. Molded Fiberglass Transition. (through five tons).
5. Built-in hanging supports.
6. Diffuser box construction of fiberglass ductboard
(through 7.5 tons) or sheet metal.
INSTALLATION INSTRUCTIONS
CONCENTRIC DIFFUSER
INSTALLATION
INSTRUCTIONS
1. The flex duct hanging from the unit should be close to the
ceiling opening for the diffuser, as shown at left. One or
two extra ceiling tiles must be removed in order to attach
diffuser and duct properly. The flex duct will allow for
some misalignment between the unit and the diffuser.
3. Make sure that the concentric diffuser is installed as
shown in the picture at the right for proper support.
2. (Before installing diffuser make sure that the four small
chains with turn buckles are in position.) Insert the
diffuser through the opening where it will be located
and aligned on the T-Bars. Attach the flex duct or sheet
metal duct and hanger chains to remove any strain on
the T-Bars.
Warning: Be sure supply opening is located
under supply opening on the A/C Unit.
INSTALLATION INSTRUCTIONS
CONCENTRIC DIFFUSER
INSTALLATION
INSTRUCTIONS
2. Connect duct to the diffuser assembly and slide
the diffuser and duct into framed opening and
secure with screws. In applications where long
duct drops are required, it is advisable to
connect a wire to duct to pull it up to the roof
curb.
Warning: Be sure that the supply opening
is located under the supply
opening of the A/C unit.
FRAMED OPENING
2" X 4" WOOD
FRAM ING
CEIL ING
DIF FUSER
DIF FUSER BOX
1. Cut opening in ceiling ½ inch larger than the
diffuser box dimension shown on
specifications. (Note: The box dimensions
is smaller than the diffuser dimension).
Frame opening with 2" x 4" wood nailer.
INSTALLATION INSTRUCTIONS
CONCENTRIC DIFFUSER
INSTALLATION
INSTRUCTIONS
DI MEN SIONAL DATA
MODEL# A B C D E F G H I J DUCT SIZE
547879 47
5
8
35
5
8
23 ¼ 33 45 4 ½ 18 2 ¼ 28 2 ½ 18x28
555637 47
5
8
41
5
8
29 ¼ 39 45 4 ½ 18 2 ¼ 32 3 ¼ 18x32
555638 47
5
8
47
5
8
29 ¼ 45 45 4 ½ 18 2 ¼ 36 4 ½ 18x36
DI MEN SIONAL DATA
MODEL# A B C D E F G H DUCT SIZE
547836 47
5
8
23
5
8
13 ½ 21 45 22 ½ 11 ¼ 10 ½ 16 RD
547837 47
5
8
23
5
8
13 ½ 21 45 22 ½ 11 ¼ 10 ½ 18 RD
547870 47
5
8
29
5
8
16
5
8
27 45 22 ½ 11 ¼ 13 ½ 20 RD
EN GI NEER ING DATA
MODEL# CFM
STATIC
PRES SURE
THROW
FEET
NECK
VEL.
JET VEL.
NOISE
LEVEL
547879
3600 .17 22- 29 844 1646 35
3800 .18 22- 30 891 1737 40
4000 .21 24- 33 938 1829 40
4200 .24 26- 35 985 1920 40
4400 .27 28- 37 1032 2011 40
555637
4600 .31 25- 34 922 1795 40
4800 .32 26- 35 962 1873 40
5000 .34 27- 36 1002 1951 40
5200 .36 30- 39 1043 2029 45
5400 .39 32- 41 1083 2107 45
555638
5600 .36 28- 37 1000 2082 45
5800 .39 29- 38 1036 2156 45
6000 .42 40- 50 1071 2230 45
6200 .46 42- 51 1107 2308 50
6400 .50 43- 52 1143 2379 50
6600 .54 45- 56 1179 2454 50
NOTES:
1. All data is based on the Air Dif fu sion Coun cil guide lines.
2. Throw data is based on Ter mi nal Ve loci ties of 75 FPM us ing
iso ther mal air.
3. Ac tual noise lev els are less than those shown.
EN GI NEER ING DATA
MODEL# CFM
STATIC
PRES SURE
THROW
FEET
NECK
VEL.
JET VEL.
NOISE
LEVEL
547836
600 .09 10- 14 234 417 18
800 .11 12- 18 313 556 20
1000 .14 15- 20 391 694 20
1200 .17 16- 22 469 833 25
547837
1200 .17 16- 22 469 833 25
1400 .20 17- 24 547 972 30
1600 .24 18- 25 625 1111 30
1800 .30 20- 28 703 1250 35
2000 .36 21- 29 781 1389 40
2200 .40 22- 30 859 1528 40
547870
2600 .17 19- 24 663 1294 30
2800 .20 20- 28 714 1393 35
3000 .25 21- 29 765 1492 35
3200 .31 22- 29 816 1592 40
3400 .37 22- 30 867 1692 40
NOTES:
1. All data is based on the Air Dif fu sion Coun cil guide lines.
2. Throw data is based on Ter mi nal Ve loci ties of 75 FPM us ing
iso ther mal air.
3. Ac tual noise lev els are less than those shown.
INSTALLATION INSTRUCTIONS
CONCENTRIC DIFFUSER
INSTALLATION
INSTRUCTIONS
DI MEN SIONAL DATA
MODEL# A B C D E F G H I J K L M DUCT SIZE
547880 47
5
8
35
5
8
20
5
8
33 ½ 45 ½ 4 ½ 18 2 ½ 28 2 ¾ 45 ½ 33 ½ 9
1
8
18x28
555639 47
5
8
41
5
8
24
5
8
39 ½ 45 ½ 4 ½ 18 2 ½ 32 3 ¾ 45 ½ 39 ½ 9
1
8
18x32
555640 47
5
8
47
5
8
24
5
8
45 ½ 45 ½ 4 ½ 18 2 ½ 36 4 ¾ 45 ½ 45 ½ 10
1
8
18x36
DI MEN SIONAL DATA
MODEL# A B C D E F G H I J K DUCT SIZE
547838 47
5
8
23
5
8
11
3
8
21 ½ 45 ½ 22 ½ 11 ½ 10 ¾ 45 ½ 21 ½ 7
1
8
16 RD
547839 47
5
8
23
5
8
11
3
8
21 ½ 45 ½ 22 ½ 11 ½ 10 ¾ 45 ½ 21 ½ 7
1
8
18 RD
547871 47
5
8
29
5
8
14
3
8
27 ½ 45 ½ 22 ½ 11 ½ 13 ¾ 45 ½ 27 ½ 8
1
8
20 RD
Form# RSI-CI-N
SUPERSEDES 10-12-04
JULY 22, 2011
EN GI NEER ING DATA
MODEL# CFM
STATIC
PRES SURE
THROW
FEET
NECK/JET
VEL.
NOISE
LEVEL
547880
3600 .17 25-33 851 30
3800 .18 27-35 898 30
4000 .21 29-37 946 30
4200 .24 32-40 993 30
4400 .27 34-42 1040 30
555639
4600 .31 26-31 841 30
4800 .32 27-32 878 30
5000 .34 28-33 915 30
5200 .36 28-34 951 30
5400 .39 29-35 988 30
555640
5600 .36 39-49 920 30
5800 .39 42-51 954 30
6000 .42 44-54 1022 30
6200 .46 45-55 1056 30
6400 .50 46-55 1090 30
6600 .54 47-56 1124 30
NOTES:
1. All data is based on the Air Dif fu sion Coun cil guide lines.
2. Throw data is based on Ter mi nal Ve loci ties of 75 FPM us ing
iso ther mal air.
3. Ac tual noise lev els are less than those shown.
4. Throw is based on diffuser blades being directed in a straight
pattern.
EN GI NEER ING DATA
MODEL# CFM
STATIC
PRES SURE
THROW
FEET
NECK/JET
VEL.
NOISE
LEVEL
547838
600 .09 8-15 210 20
800 .11 9-16 281 20
1000 .14 10-17 351 20
1200 .17 11-18 421 20
547839
1200 .17 11-18 421 20
1400 .20 12-19 491 20
1600 .24 12-20 561 20
1800 .30 13-21 632 20
2000 .36 14-23 702 20
2200 .40 16-25 772 20
547871
2600 .17 24-29 669 20
2800 .20 25-30 720 25
3000 .25 27-33 772 25
3200 .31 28-35 823 25
3400 .37 30-37 874 30
NOTES:
1. All data is based on the Air Dif fu sion Coun cil guide lines.
2. Throw data is based on Ter mi nal Ve loci ties of 75 FPM us ing
iso ther mal air.
3. Ac tual noise lev els are less than those shown.
4. Throw is based on diffuser blades being directed in a straight
pattern.
© Nortek Global HVAC
, LLC 2015. All Rights Reserved.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Unbranded R6GI Installation guide

R6GI
Unbranded
Brand
Unbranded
Model
R6GI
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents