1
User Guide
MOKI PAIRBUDS
True Wireless Earbuds
2
Contents
Overview
Customise Your Fit
Activate
Inter-pairing
Connecting & Pairing
Playing Music
Phone Calls
Recharge ChargeDock
Turn O PairBuds
Recharge PairBuds
Charge a USB Device
LED Indicator
Technical Specifications
Troubleshooting
Safety Information
4
5
6
7
9
10
11
12
13
14
15
4
MOKI
PAIRBUDS
Thank you for purchasing genuine Moki PairBuds.
These true wireless earbuds are the next evolution
in personal audio. Using Bluetooth
®
4.1 they are
more ecient so can play longer and can reach
frequencies previously only capable through wires.
Please read all information and warnings before
using PairBuds. Improper use may lead to the
product being damaged or lost. Care must be taken
to ensure a secure fit. Strenuous or high impact
activity may cause buds to dislodge.
Do not use earphones in situations that require
full awareness of your surroundings such as driving
or cycling.
CONTENTS
• 2 x PairBuds (Bluetooth True Wireless Earphones)
• ChargeDock (charging station + power bank)
• Silicone Buds (2 x Small, 2 x Medium, 2 x Large)
• MicroUSB Charge Cable
• User Guide
5
CHARGEDOCK OVERVIEW
PAIRBUD OVERVIEW
ON/OFF
LED charge indicator
MicroUSB input (1A)
( To recharge ChargeDock )
USB output (1.5A)
( To recharge other device )
LED indicator
Changeable ear tips
ON/OFF
6
CUSTOMISE
YOUR FIT
INSERTING
THE PAIRBUDS
Moki PairBuds come with three dierent sizes of
changeable earbud tips. Ensure that you have a firm
but comfortable fit which will help achieve the highest
quality sound. We recommend trying all the earbud
tips on each Left and Right PairBud to find the size
that suits each ear the best.
• 3 pairs silicone buds
Check for “L” (Left) & “R” (Right) on each PairBud.
1) Tilt the PairBud slightly forward and insert the tip into
your ear
2) Secure the fit by rotating each PairBud until it feels
comfortable. If PairBuds move or feel loose when gently
shaking your head try the next size or use memory
foam buds.
7
Moki PairBuds (and the ChargeDock) are partially
charged when purchased. For best performance on
first use we recommend you recharge them fully.
1) Place PairBuds into the ChargeDock. They
magnetically snap into the dock ports and
automatically start recharging.
2) Spin the top cover of the ChargeDock to reveal the
USB ports. Connect the MicroUSB to the ChargeDock
and connect the Standard USB to a port on a
computer or USB power adaptor (1A).
3) The LED indicators on the ChargeDock will start
flashing, ChargeDock is fully charged when all four
LED’s glow solid (about 2-3 hours). Full charge of the
PairBuds will take about 1 hour.
The “L” and “R” PairBuds inter-pair with each other by
default. The user can simply take out both PairBuds
from the ChargeDock and they will inter-pair to each
other automatically.
Note:
If they fail to inter-pair automatically, you may reset the
inter-pair connection (see page 8 ). PairBuds take 3
seconds to turn on/o from the case.
CHARGE
INTER-PAIRING
THE PAIRBUDS
(continued)
8
Once the PairBuds have been turned ON, the “L” Pair-
Bud LED will flash red/blue while the LED on the “R”
PairBud will flash blue. You may then pair the PairBuds
with your Bluetooth device.
If the PairBuds fail to pair a reset is required.
1) Power o both PairBuds. Hold buttons for 3-5
seconds. LED blinks red once then o.
2) Press and hold the buttons on each PairBud for
about 8 seconds or until the LED indicators on both
rapidly blink red/blue (this will reset pairing on both).
Place both PairBuds back in ChargeDock and remove
again after 3 seconds.
3) PairBuds will re-establish a connection with each
other. The left PairBud will flash red/blue and the
right PairBud will flash blue only. After inter-pairing is
successful, connect to your Bluetooth device.
INTER-PAIRING
THE PAIRBUDS
(continued)
RESET
INTER-PAIR
CONNECTION
9
CONNECT TO A
BLUETOOTH
DEVICE
PAIRING WITH A
NEW BLUETOOTH
DEVICE
PLAYING MUSIC
Moki PairBuds can only connect to Bluetooth enabled
audio devices. Make sure you turn ON / Enable
Bluetooth on the device.
In your devices settings:
1) Go to Bluetooth. Turn “ON”
Available Devices will soon update, - “MOKI PairBuds”
should be listed. Select it to connect.
2) The PairBuds will notify you with “CONNECTED”
message.
1) Disconnect / Unpair the Bluetooth connection from
any previously paired device. Under Settings - Turn
OFF Bluetooth or select “Forget Device”
2) On the new device turn ON Bluetooth and repeat
the above connection steps.
Once you are connected via Bluetooth, simply select
the music app on your device and press play. Once
music is selected you may play / pause by tapping
either earbud once.
Note:
PairBuds reconnect to previously connected devices when
available. If more than one device is detected nearby, it will
attempt to pair with the last device used. Turn “OFF” Bluetooth on
other devices if connection is not successful. Repair the inter-pair
connection if necessary (see page 8).
10
MAKING A CALL: PairBuds may be used as a headset
when making mobile phone or VoIP calls. Ensure your
device / app is set to “Play calls through Bluetooth
when available” or similar.
ANSWER INCOMING CALL: When your phone rings
the music will pause and you will hear “incoming”
announced through the left PairBud followed by a
series of beeps. Tap the left PairBud button to answer
the call.
END CALL: Tap left PairBud button to end the call.
REDIAL LAST CALL: Double tap left PairBud and your
mobile phone will automatically redial the last number
you called.
1) Connect a MicroUSB cable to the MicroUSB port on
the ChargeDock. Connect the other end to a USB port
on your USB wall adaptor, computer or power bank (1A).
2) While the ChargeDock is recharging, the LED
indicators blink and then glow solid blue to indicate
the percentage of charge reached (pg 13). When fully
charged all four LEDs will glow solid - (disconnect cable).
MAKING OR
RECEIVING
CALLS
CHARGING THE
CHARGEDOCK
11
TURNING OFF
THE PAIRBUDS
CHARGING THE
PAIRBUDS
1) Press and hold the PairBud control button for
3 seconds and the PairBud will notify you with
“POWER OFF”.
2) Simply put the PairBuds back in their magnetic
ChargeDock ports, they will automatically turn o and
recharge themselves.
Put the PairBuds in their magnetic ChargeDock ports.
The PairBuds LED will glow solid red to indicate that
they are charging.
PairBud recharge time: Approx. 1 hour
12
Note:
The maximum current output of the ChargeDock when used as a
power bank is 1.5A. Devices capable of accepting more than 1.5A
(input) may charge slower than usual. Devices that use less than
1.5A will safely charge as normal. Some device manufacturers may
use dierent configurations or have unique charging requirements.
You will need to have a USB cable compatible with your device.
Moki cannot guarantee this product will charge all devices
(maximum output 1.5A / capacity 2200mAH).
1) Using your devices USB charge cable, insert into the
USB port on the ChargeDock. Connect other end to
your phone.
2) Press the ON/OFF button on the ChargeDock.
3) When your device is fully charged or the power
bank is flat, disconnect the cable.
CHARGE A
USB DEVICE
13
CHARGEDOCK
LED INDICATOR
CHARGING
Note:
Take care when charging. It is normal for the PairBuds and
ChargeDock to get warm during charging and discharging.
Do NOT cover or charge in wet environments.
Dock charge time: Approx. 3 hours (DC5V/1A via MicroUSB)
Buds charge time: Approx. 1 hour
(Fully charged ChargeDock = Approx 20 PairBud recharges)
25%
LED
50 75 100
Bluetooth: V4.1 / 10m / Class 2
Impedance: 16 Ω
Sensitivity: 94 dB@1mW +/-3dB
Frequency Response: 20Hz - 20kHz
Input Voltage: USB 5V / 1.0A
Output Voltage: USB 5V / 1.5A
Play Time*: 3 hours + Dock = additional 60 hours
Charge Time*: PairBuds = 1 hour
ChargeDock = 3 hours
Dimensions: PairBuds = 15 x 15 x 25 mm
ChargeDock = Ø82 x 27 mm
Weight: PairBuds = 4g
ChargeDock = 101g
*Times indicated are an approximation.
TECHNICAL
SPECIFICATIONS
14
TROUBLE-
SHOOTING
PairBuds don’t turn on when removed from
the ChargeDock
• Make sure the ChargeDock and PairBuds are charged.
• Place the PairBuds back in the ChargeDock remove
again after 3 seconds.
• Switch on manually by holding each PairBud button.
No connection between PairBuds and Bluetooth device
• Make sure the PairBuds are fully charged.
• Check the PairBud LEDs, ensure both are switched on.
• Make sure your device is ON and has Bluetooth
enabled.
• Device must support “Bluetooth Advanced Audio
Distribution profile” (A2DP).
• Bring PairBuds within 1m of your Bluetooth device.
Bluetooth device is successfully paired but no audio
can be heard on the PairBuds.
• Make sure PairBuds are connected. You usually
only “pair” to a device once but if other devices are
available you may need to reconnect manually.
• Make sure the Bluetooth device volume is set to a
comfortable listening level.
• Ensure connected device has its sound settings preset
to “Play audio through Bluetooth” or similar.
15
• Do not mod or disassemble PairBuds or ChargeDock
in any way.
• Do not use/charge in bathrooms or wet areas.
• Do no expose PairBuds to moisture, immerse them in
liquid or touch with wet hands. Keep dry at all times.
• Do not charge PairBuds on / covered with flammable
materials. i.e. Bedding, clothing etc.
• Disconnect the ChargeDock when fully charged.
• Do not connect input and output ports to each other.
• PairBuds are not a toy. Children using them should be
supervised & have volume monitored by an adult.
• Keep out of reach of young children and pets.
• Excessive heat will damage the battery capacity &
aect playtime. Do not store PairBuds where they
may reach excessively high temperatures, particularly
hot cars. Ideally store between 0°C to 40°C.
• Do not dispose of this product in fire.
SAFETY
INFORMATION
16
mokiinternational.com
Moki International all rights reserved
Made in China
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth® SIG, Inc. and any use of such marks by Moki is under license.
Other trademarks and trade names are those of their respective owners.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
