07
Connecting a Bluetooth device for the first time
To pair and connect
1. Place the BassPop and your Bluetooth device
within one metre of each other.
2. On your device, turn ON Bluetooth and scan.
3. On the BassPop press and hold the power
( ) button for 1-2 seconds until you hear the
start-up chime beep and see the LED quickly
flash red / blue, indicating BassPop is
searching for a Bluetooth device to connect with.
4. After a few seconds “BassPop” should appear
listed under available devices. Select it to connect.
OPERATING
INSTRUCTIONS
Bluetooth and associated call functions will only operate
when there is no cable connected to the 3.5 mm AUX-IN
socket of the BassPop.
Pair and play via Bluetooth
Note:
Only one Bluetooth audio player or phone may connect to the
BassPop at a time. If you have a problem connecting, check that
no other previously paired devices are reconnecting automatically.
To re-scan simply turn BassPop power o, wait five seconds and
turn power back on.