RECHARGING POWER & GO
Press power button to see battery level
LED INDICATORS
Using your own cables, plug the USB end into the Power & Go
and the other end into your device. Charging should begin
automatically – if it doesn’t, press the power button.
Charges 2 devices at once:
• 1 via built-in USB-A Port
• 1 via USB-C Port
CHARGING DEVICES
Connect the included recharging cable to any USB power
source. Fully charged unit shows 4 solid, non-blinking LEDs.
3 ways to recharge: From wall outlet, car,computer
For FULL user manual and more
information, scan the QR code with
your smartphone camera or
go to: support.mycharge.com
POWER & GO QUICK START GUIDE
APM10B2-QSG
Power button
=
=
=
=
USB-A port
USB-C port
-
1
